diff --git a/CHANGES b/CHANGES
index 8d4861eb..df4f97fe 100644
--- a/CHANGES
+++ b/CHANGES
@@ -28,6 +28,7 @@ SVN HEAD
                   Fixed address ranges checked for SMSC EMC1403 and EMC1404.
                   Fix detection of SPD EEPROM on DDR3 memory modules
                   Add detection of AMD family 12h and 14h thermal sensors
+                  Add detection of EMC6D103S
 
 3.2.0 (2010-10-10)
   libsensors: Increase MAX_SENSORS_PER_TYPE to 24
diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
index 6e1dc94d..b345d93b 100755
--- a/prog/detect/sensors-detect
+++ b/prog/detect/sensors-detect
@@ -551,6 +551,11 @@ use vars qw(@i2c_adapter_names);
 		driver => "lm85",
 		i2c_addrs => [0x2c..0x2e],
 		i2c_detect => sub { lm85_detect(@_, 6); },
+	}, {
+		name => "SMSC EMC6D103S",
+		driver => "to-be-written",	# lm85
+		i2c_addrs => [0x2c..0x2e],
+		i2c_detect => sub { lm85_detect(@_, 8); },
 	}, {
 		name => "Winbond WPCD377I",
 		driver => "not-a-sensor",
@@ -4741,7 +4746,7 @@ sub andigilog_aSC7511_detect
 
 # Chip to detect: 0 = LM85, 1 = LM96000, 2 = ADM1027, 3 = ADT7463,
 #		  4 = EMC6D100/101, 5 = EMC6D102, 6 = EMC6D103,
-#		  7 = WPCD377I (no sensors)
+#		  7 = WPCD377I (no sensors), 8 = EMC6D103S
 # Registers used:
 #   0x3e: Vendor register
 #   0x3d: Device ID register (Analog Devices only)
@@ -4776,7 +4781,11 @@ sub lm85_detect
 		return if $verstep != 0x65;	# EMC6D102
 	} elsif ($chip == 6) {
 		return if $vendor != 0x5c;	# SMSC
-		return if $verstep != 0x68;	# EMC6D103
+		return if $verstep != 0x68	# EMC6D103 A0
+		       && $verstep != 0x69;	# EMC6D103 A1
+	} elsif ($chip == 8) {
+		return if $vendor != 0x5c;	# SMSC
+		return if $verstep != 0x6a;	# EMC6D103S
 	}
 
 	if ($vendor == 0x41) {			# Analog Devices