add back temperature support for version 1 of chip.

The temperature registers are in different places for the two
      versions. Both versions unfortunately have the same PCI ID.
      Apparently the temperature conversion formulas are different
      for the two versions. Neither is yet implemented in the driver.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1070 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2001-04-14 01:39:10 +00:00
1 parent 2dc8cc9b41
commit ffedd9fa93
3 files changed
+45 -15

No files matched your search

+10 -1
View File
@@ -9,6 +9,11 @@ Supported chips:
Addresses scanned: ISA in PCI-space encoded address
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
Supports following revisions:
Version PCI ID PCI Revision
1 1039/0008 01
2 1039/0008 C0
Author: Kyösti Mälkki <kmalkki@cc.hut.fi>
@@ -27,7 +32,11 @@ For the I2C bus driver see i2c-sis5595.
The SiS5595 implements zero or one temperature sensor, two FAN speed
sensors, four or five voltage sensors, and alarms.
The temperature sensor (temp) and the fifth voltage sensor (in4) share a pin
On the first version of the chip, there are four voltage
sensors and one temperature sensor.
On the second version of the chip,
the temperature sensor (temp) and the fifth voltage sensor (in4) share a pin
which is configurable, but not through the driver. Sorry.
The driver senses the configuration of the pin, which was hopefully
set by the BIOS.