* Removed unnecessary MOD_INC/DEC_USE_COUNT in host adapter drivers
(i2c-via bit-lp bit-velle)
You can now rmmod adapters even when they have registered clients.
Without this, you would have to detach the clients first. Only way of doing
this is to rmmod the client drivers, but the same drivers might be used to
access clients behind other hosts.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@347 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fixed i2c_probe to actually try some addresses, and
change the client->addr _only_ when we get a match.
* Algo-bit now scans the bus before registering it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@346 7894878c-1315-0410-8ee3-d5d059ff63e0
lm_sensors2 source tree. Improvements in VIA driver,
now checks revision code and refuses to load the
module if bit_test (in algo-bit) fails.
(Also fixes previous unsuccessfull CVS commit)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@187 7894878c-1315-0410-8ee3-d5d059ff63e0
I really hope I did not forget an add or remove. If strange things happen
when you compile, please let me know.
There may still be problems with the EXPORT_* stuff; it seems to work now
for kernel 2.0.36pre19, but it may give trouble for earlier kernels. We
need to check that.
Some i2c modules may be a bit verbose at this moment.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@184 7894878c-1315-0410-8ee3-d5d059ff63e0
* sensors.conf.eg now contains LM80 declarations
* i2c/i2c-core.c again displays which adapters and clients are found and
connected, but it does not track the calls to transfer functions in dmesg
* Slight alarms computation bug in lm78.c repaired
* First hacks at lm80.c; expect a fully working version later today
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@113 7894878c-1315-0410-8ee3-d5d059ff63e0
Several, mostly internal, things changed. Most notably, the install
directories are extended (we'll need this to install the new library).
Also, explicit rules for creating .c and .o files are added.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@88 7894878c-1315-0410-8ee3-d5d059ff63e0
* Turned the i2c noise level down, by setting the debug_level in algo-bit.c
and i2c-core.c to 0 instead of 1. This should stop it from polluting
the dmesg output, as it does at this moment.
* Renamed gl518-r?0-* entries to gl518sm-r?0-*
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@82 7894878c-1315-0410-8ee3-d5d059ff63e0
Object files for executables (as opposed to modules) will now use the .ro
extension; their dependency file is a .rd file. Currently, this affects only
the i2c/eeprom/eeprom program. but in the future, there will be more
executables generated.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@52 7894878c-1315-0410-8ee3-d5d059ff63e0
Yet more documentation updates, and a quick Makefile update to install all
include files correctly.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@50 7894878c-1315-0410-8ee3-d5d059ff63e0
Everything now compiles cleanly (except for warnings in kernel header files)
against 2.1.122. As I do not run 2.1 kernels, loading them could not be
tested.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@22 7894878c-1315-0410-8ee3-d5d059ff63e0
* 'cvs admin -ko i2c' should disable all RCS keyword substitutions from now
on
* Put all EXPORT stuff between #ifdef LM_SENSORS #endif statements.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@21 7894878c-1315-0410-8ee3-d5d059ff63e0
Yes, our first chip driver is now fully operative. Some parts of it can
still be moved to sensors.o and reused by other drivers, but this can be
done later.
Bug fixes:
* i2c-core.c: Corrected previous patch (a client was now unloaded twice,
which caused problems, as could be expected).
* lm78.c, sensors.c: some minor typos, which caused the crashes
* lm78.c: FAN_DIV only has two fields (fan 3 is not changable)
* sensors.c: ISA/SMBus addresses are prefixed with zeros in directory names
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@20 7894878c-1315-0410-8ee3-d5d059ff63e0
* Some Makefile changes. doc/makefiles documents most of them.
* The lm78 module now compiles, but it will still crash.
* New module sensors, with general code usable by chip driver modules
* i2c-core: added function i2c_adapter_id(), which returns a (low)
unique i2c-bus ID.
* lm78.h stuff moved into lm78.c or sensors.h
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@19 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-bus is renamed to i2c-proc
* small patch in i2c-core.c (see correspondence with Simon Vogl)
* sensors.h contains i2c constants
* It seems lm78.[ch] was not yet committed?!?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@16 7894878c-1315-0410-8ee3-d5d059ff63e0
* Modules now print their version number and date on insertion
* Some printk statements missed a \n
* 'make clean' now works, even if some .d (dependency) files contain garbage.
Note that *only* 'make clean' helps in that case; 'make clean all', for
example, will fail! There is really no nice way to solve that.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@11 7894878c-1315-0410-8ee3-d5d059ff63e0
effect anything in an adverse way (except possibly messing up the
name-space a bit :'). But, it compiles and *should* link OK. Testers???
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@7 7894878c-1315-0410-8ee3-d5d059ff63e0
The i2c modules now compile and insert without any problem. If I only had
a VIA mainboard...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@6 7894878c-1315-0410-8ee3-d5d059ff63e0
Please examine the Makefile before extending it, as its approach is
completely new. It should be very modular now, though. Makefile fragments
are called Module.mk.
The Module.mk in i2c does not handle dependencies yet.
There are some patches to bit-mb.c to make it compile with 2.0 kernels.
They have been sent to Simon Vogl (author of the i2c module).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4 7894878c-1315-0410-8ee3-d5d059ff63e0
README.directories contains a description of the directories I created;
read it if you have questions about them.
doc/design is the design document I sent before through email.
doc/useful_addresses.html contains links to I2C, SMBus and sensors
information.
Note that we may have to change minor i2c things, like Makefiles; this
is why I put it in the archive too (we should, of course, send important
changes to Simon Vogl).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard