* Changed test in lm75 setup code to 'read/write returns < 0' instead of
(old) 'read/write returns 0xff'. Nowadays, we can see the difference
between an error and a 0xff result, after all.
* Introduced constants used by PIIX4 for transaction types. These are
*not* the same as those in smbus.h.
* Some small code optimalizations in piix4.o.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@40 7894878c-1315-0410-8ee3-d5d059ff63e0
* PIIX4: better names in /proc files
* sensors.c: fixed bug which prevented registration of non-ISA clients
Status:
* lm75 inserts happily and interacts with the PIIX4 correctly
* lm75 readings are still wrong (all 0xff)
* lm75 insertion with ISA bus present causes oops
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@39 7894878c-1315-0410-8ee3-d5d059ff63e0
If your LM78/78-J/79 is still not detected, please recompile lm78.o with
DEBUG=1 and mail the output of dmesg. Same for Winbonds.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@33 7894878c-1315-0410-8ee3-d5d059ff63e0
Well, it should work. But until we have implemented the remaining parts of
piix4.o, we won't be able to test it. Anybody?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@29 7894878c-1315-0410-8ee3-d5d059ff63e0
I moved a large part of the proc and sysctl call-back functions into
sensors.c. The result saved about 100 lines in lm78.c; it now uses only
2 pages according to lsmod, instead of 3! Also, other modules can use
the same functions, saving coding efforts and keeping them small.
I also fixed a fan_div display error.
Expect more code to be moved to sensors.c: I am writing lm75.c, and
most things which are in both modules (and so probably general purpose)
will be moved to sensors.c.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@28 7894878c-1315-0410-8ee3-d5d059ff63e0
* LM78, LM78-J and LM79 now all supported
* Chip type reflected in /proc/bus/i2c-?, /proc/.../sensors/* and
/proc/ioports.
* VID initialises IN0 and IN1, except if it is 3.50 V (then it falls back to
2.80 V)
* Slightly better ISA detection (but still not good enough)
* Temperature now in tenth of degrees, instead of whole degrees (for better
compatibility)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@27 7894878c-1315-0410-8ee3-d5d059ff63e0
Yes, our first chip driver is now fully operative. Some parts of it can
still be moved to sensors.o and reused by other drivers, but this can be
done later.
Bug fixes:
* i2c-core.c: Corrected previous patch (a client was now unloaded twice,
which caused problems, as could be expected).
* lm78.c, sensors.c: some minor typos, which caused the crashes
* lm78.c: FAN_DIV only has two fields (fan 3 is not changable)
* sensors.c: ISA/SMBus addresses are prefixed with zeros in directory names
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@20 7894878c-1315-0410-8ee3-d5d059ff63e0
* Some Makefile changes. doc/makefiles documents most of them.
* The lm78 module now compiles, but it will still crash.
* New module sensors, with general code usable by chip driver modules
* i2c-core: added function i2c_adapter_id(), which returns a (low)
unique i2c-bus ID.
* lm78.h stuff moved into lm78.c or sensors.h
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@19 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-bus is renamed to i2c-proc
* small patch in i2c-core.c (see correspondence with Simon Vogl)
* sensors.h contains i2c constants
* It seems lm78.[ch] was not yet committed?!?
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@16 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard