It may be very close or very far from working. At this point, scanning a
bus gives a bunch of errors, but seems to do different things around
addresses which could very well have devices, so it seems promising.
Hopefully, it's just something silly I'm missing like an 'ack'.
Pretty good for not having *any* technical documentation on the driver,
except a partially written (and maybe not even working) example code
from Apple.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@813 7894878c-1315-0410-8ee3-d5d059ff63e0
what there is now. What's left is to use the registers of the keywest
to communicate with devices on the bus. (I.e., flesh out the 'access'
routine.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@812 7894878c-1315-0410-8ee3-d5d059ff63e0
commit, the module can detect and read the registers from compatible
Keywest buss(es). (Note: there may be more than one bus, as I seem to have.)
Probing is done via Apple's 'New World' Open-Firmware rather than PCI. In
this way, this driver should work with any I2C bus (when it is completed)
which is Keywest 'compatible'. The down side is that this module won't
work on anything but a newer Apple PPC.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@811 7894878c-1315-0410-8ee3-d5d059ff63e0
The i801 driver is for the standard I2C bus on an i810 board.
This driver adds the support for the DDC and TV-out busses.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@729 7894878c-1315-0410-8ee3-d5d059ff63e0
Wasn't used by bt869 so wasn't found before.
i2cdump now works and sensors_detect will find ddc monitor.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@711 7894878c-1315-0410-8ee3-d5d059ff63e0
Simultaneous DDC and I2C access may cause errors.
No support for multiple Voodoo3/Banshee chips, only first one
is handled.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@698 7894878c-1315-0410-8ee3-d5d059ff63e0
Please test. Changes in voodoo3_setup:
* Use pci_find_device instead of traversing the list ourselves;
* Eliminate flag, testing v3_num is just as good;
* Elimiate result, it was not used anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@684 7894878c-1315-0410-8ee3-d5d059ff63e0
Set DESTDIR if you want to install at some other place then where you
will run everything from.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@675 7894878c-1315-0410-8ee3-d5d059ff63e0
Reasons varied from typos (_ instead of -) to static declarations that
should have been extern.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@646 7894878c-1315-0410-8ee3-d5d059ff63e0
sensors-detect detection is now complete; I think nothing else needs
to be done in the tree?!? (except documentation of course)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@643 7894878c-1315-0410-8ee3-d5d059ff63e0
The Makefile now examine $(LINUX)/.config to see what modules need to be
compiled. It compiles only those modules which were either not configured
in at all, or were built as modules (ie. drivers which are built-in in the
kernel are not built, as they can not be overruled).
The above is still potentially dangerous, if we break the interface of
our modules. Still, it is much better than it was.
C
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@575 7894878c-1315-0410-8ee3-d5d059ff63e0
Most important change: GL518SM-rev00 can't use kernel threads on 2.0 and
early 2.1 kernels
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@563 7894878c-1315-0410-8ee3-d5d059ff63e0
again.
No testing yet, just a normal compile without kernel patching. Expect more
of these minor patches today,
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@553 7894878c-1315-0410-8ee3-d5d059ff63e0
* mkpatch now correctly works when kernel-side files do not yet exist.
I forgot to propagate a change in the i2c version.
* __init* handling in mkpatch and compat.h
* New i801 defines added to mkpatch
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@545 7894878c-1315-0410-8ee3-d5d059ff63e0
* removed algorithm registration in i2c-isa
* renamed i2c-via2.o to i2c-viapro.o in the driver messages
* added detection for new drivers in sensors-detect script
* minor gl518sm fix
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@522 7894878c-1315-0410-8ee3-d5d059ff63e0
Philip Edelbrock