. added support for via686a and other new chips
. added support for alarms and beeps
. updated to log through syslog instead of a custom logfile
. updated so when run as "sensors" (ln -s sensord sensors) it
mimics the existing sensors command except for formatting
. modularized a bit
Yet to do:
. complete support for alarm checking without sensor logging
. signal alarms through syslog level ALERT
. add final support for multivalued alarms
. check up on some questions about existing sensors command
. update manual page inc. notes on syslog usage
. test more fully
-- merlin
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@828 7894878c-1315-0410-8ee3-d5d059ff63e0
* W83783S now correctly assumes only one LM75-like chip address
* No more runtime-errors if an unknown adapter was found.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@825 7894878c-1315-0410-8ee3-d5d059ff63e0
The i801 driver is for the standard I2C bus on an i810 board.
This driver adds the support for the DDC and TV-out busses.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@729 7894878c-1315-0410-8ee3-d5d059ff63e0
busses
The changes are large and tricky, so it is almost certain there are
many bugs. Please run sensors-detect and tell me whether it works
correctly or not.
All changes are in the routines that print the modprobe statements at
the end, so if it fails, it will fail there.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@720 7894878c-1315-0410-8ee3-d5d059ff63e0
you can run i2cdump even when a driver is installed.
Add a cat of /proc/bus/i2c to the help function to help
users with the bus number argument.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@690 7894878c-1315-0410-8ee3-d5d059ff63e0
* DDC only looked for on 0x50, as other addresses are treated as
sub-addrs;
* LM78-J again displays right driver (oops...)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@680 7894878c-1315-0410-8ee3-d5d059ff63e0
This often-asked for, long-planned and somewhat-forgotten feature
makes it possible to tell libsensors-linked applications (like
the sensors program) that certain features should not be displayed.
This is very nice for things like unconnected temperature sensors
or fans.
Modifications to the library code, to the sensors program and to
the documentation and example sensors.conf file.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@676 7894878c-1315-0410-8ee3-d5d059ff63e0
Set DESTDIR if you want to install at some other place then where you
will run everything from.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@675 7894878c-1315-0410-8ee3-d5d059ff63e0
Changes in sensors.c:
sensors_detect now skips addresses which are already taken. Even a
force parameter can not override this, as it could lead to major
problems.
For ISA addresses, the same is done; but the client drivers still need
a check if they claim more than one ISA address (as all of the current
ISA clients do).
Changes in chip drivers:
Removed the comment about needing address registration
Changes in i2cdetect.c:
Marks addresses which are already claimed
Changes in sensors-detect:
Warns when an address is already claimed, and skips it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@667 7894878c-1315-0410-8ee3-d5d059ff63e0
Could somebody with a LM78 or W83781D on both SMBus and ISA bus please test
this? It should say `Alias of the chip on I2C bus `...' address `...''
when scanning the ISA bus.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@664 7894878c-1315-0410-8ee3-d5d059ff63e0
default. Now uses libsensors. Ripped the display formatting code from
sensors (with some modification) but needless to say I've only tested
a single chip. Doesn't support alarms yet. With a bit of work, could
share the display formatting code with sensors so just one source needs
updating. Compiles on my machine.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@661 7894878c-1315-0410-8ee3-d5d059ff63e0
sensors-detect detection is now complete; I think nothing else needs
to be done in the tree?!? (except documentation of course)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@643 7894878c-1315-0410-8ee3-d5d059ff63e0
Added/changed:
- Update, if necessary, the version number of `sensors'
(edit prog/sensors/sensors.c and change the VERSION define)
- Update if necessary, the version number of libsensors
(edit lib/Module.mk and change LIBMAINVER and/or LIBMINORVER)
Remember: update main number when interface changes, minor if new
functionality is added, and patch if only bugs are fixed.
- Update lm_sensors.lsm and send it to the LSM by mailing it to
lsm@execpc.com with the subject `add' (no quotes).
Also bumped up the `sensors' version number (should have done that
long ago), it is now at 1.0.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@636 7894878c-1315-0410-8ee3-d5d059ff63e0
Merlin Hughes