Mark D. Studebaker
b4b343d74b
claim support for Via 686B. Same PCI id as 686A. No driver changes.
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1010 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-02-03 19:22:54 +00:00
Mark D. Studebaker
899498a9b4
Allow force and force_via686a parameters. Driver will take the
...
address and program the base address in the 686a.
This is NOT a PCI force; the 3057 device must
be present in lspci.
Should work for Asus A7V/K7V boards which don't set the
base address (because they also have a as99127f on them!??).
Some rough edges remain, because
via686a_find() does not know there is a force; that only
is apparent to via686a_detect().
Notably, the driver will stay loaded even if the address is
uninitialized and there is no force; also, the driver complains
that a force is needed even when you give it one.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@999 7894878c-1315-0410-8ee3-d5d059ff63e0
2001-01-20 03:43:50 +00:00
Frodo Looijaard
aa0c8f6768
Updated the MUTEX definitions again - they are now guarded by
...
the horrible
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
They should now both work with 2.3 kernels (including 2.4 prepatches)
and very new 2.2 kernels (ie. 2.2.18 prepatches)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@933 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-11-22 23:54:39 +00:00
Bob Dougherty
8113589931
(bob dougherty) Fixed typos in temp-conversion polynomial fit formula. (thanks to Uwe Anderson for finding them.)
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@914 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-10-25 15:31:51 +00:00
Mark D. Studebaker
5330eed207
(mds) Allow via686a's that have sensor I/O mapped but sensors not
...
enabled by enabling the sensors. Found on FIC SD11 boards.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@788 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-04-02 00:42:19 +00:00
Bob Dougherty
5e8886a66f
(bobd) now configures temp alarms to stay on while out of range (via686a default is to clear alarm when reg is read)
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@768 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-10 20:30:45 +00:00
Bob Dougherty
0f4931a011
(bobd) cleaned to conform to kernel coding standards & tightened up some inlines
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@766 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-10 06:50:51 +00:00
Bob Dougherty
9a072f2667
(bobd) fixed a small bug in the alarms
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@765 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-09 06:55:33 +00:00
Bob Dougherty
0b240765ef
(bobd) fixed temp over & hyst write bug and set default 5V & 12V correctly.
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@763 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-08 16:15:15 +00:00
Bob Dougherty
097c23db16
fixed fan RPM reading & improved accuracy of temp LUT.
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@762 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-08 04:59:33 +00:00
Bob Dougherty
d1412ad83b
bobd: removed nasty floating-point math, fixed temp3 over & hyst bug.
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@759 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-07 15:25:20 +00:00
Bob Dougherty
2c149094bd
fixed temp & voltage conversion- they're still not perfect, but are worth testing
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@756 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-06 15:56:14 +00:00
Mark D. Studebaker
cd28374a81
(mds) change type_name to via686a (remove space).
...
First bug found by Bob D.!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@752 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-05 02:24:43 +00:00
Mark D. Studebaker
40ccaaa658
(mds) Add via686a integrated sensors support. Untested.
...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@742 7894878c-1315-0410-8ee3-d5d059ff63e0
2000-03-04 16:14:08 +00:00
Mark D. Studebaker