* Removed several superfluous (struct i2c_client *) casts (they were left
from the time we had separate structs for smbus and isa)
* Removed the internal lists of registered clients
They have not been used for quite some time now, took memory space,
and limited the maximum number of clients that could be registered.
Also removed two small Makefile errors - I am happy I caught them before
the next release!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@582 7894878c-1315-0410-8ee3-d5d059ff63e0
The Makefile now examine $(LINUX)/.config to see what modules need to be
compiled. It compiles only those modules which were either not configured
in at all, or were built as modules (ie. drivers which are built-in in the
kernel are not built, as they can not be overruled).
The above is still potentially dangerous, if we break the interface of
our modules. Still, it is much better than it was.
C
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@575 7894878c-1315-0410-8ee3-d5d059ff63e0
be working perfectly. Of course, some real-world users might find something
I didn't... BTW- I caught a minor bug which I thought was funny, and checked
lm75.c to see if it was there from the start... and it was! So, I managed to
catch a bug in lm75.c which might have resulted in bad temp_hyst readings
during that short period between setting new limits and the next valid update.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@564 7894878c-1315-0410-8ee3-d5d059ff63e0
Most important change: GL518SM-rev00 can't use kernel threads on 2.0 and
early 2.1 kernels
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@563 7894878c-1315-0410-8ee3-d5d059ff63e0
again.
No testing yet, just a normal compile without kernel patching. Expect more
of these minor patches today,
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@553 7894878c-1315-0410-8ee3-d5d059ff63e0
* mkpatch now correctly works when kernel-side files do not yet exist.
I forgot to propagate a change in the i2c version.
* __init* handling in mkpatch and compat.h
* New i801 defines added to mkpatch
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@545 7894878c-1315-0410-8ee3-d5d059ff63e0
* changed sensors.o to use WRITE address to check existence of
a client
In most cases this makes no difference. However, some versions of the
Matrox Orbital display hang the bus if you try to ack the read address.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@535 7894878c-1315-0410-8ee3-d5d059ff63e0
* removed algorithm registration in i2c-isa
* renamed i2c-via2.o to i2c-viapro.o in the driver messages
* added detection for new drivers in sensors-detect script
* minor gl518sm fix
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@522 7894878c-1315-0410-8ee3-d5d059ff63e0
* GL518 & GL520: setting fan{1,2}_min 0 masks alarm & beep
* GL518SM rev 0x00 : Run iteration code in kernel thread
Every run of "sensors" now reports results of the previous
iteration run, and triggers a new one.
* GL520: Reads all inputs now
* GL520: Select between Temp2 or -12V input.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@520 7894878c-1315-0410-8ee3-d5d059ff63e0
the kernel.
* <kernel/init.h> is now included for all modules
* Initialization-time only functions and variables are marked with __init
* EXPORT_SYMBOL or EXPORT_NO_SYMBOLS declarations added
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@513 7894878c-1315-0410-8ee3-d5d059ff63e0
* gl518sm document simplified for rev 0x00 & 0x80
* gl518sm & gl520sm libsensors interface updates
BTW: Revision is no longer part of the name, so old sensors.conf
will not work at all with gl518sm.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@511 7894878c-1315-0410-8ee3-d5d059ff63e0
* Restructured iteration code for rev 0x00
Two modes already:
0 no iteration, no delay, reads only vin3, vin0-2 = 0
1 does iteration, delays reads approx. 8 seconds
To be added:
2 does iteration in background, no delay for user apps
In this mode the results of the last iteration loop are shown,
and then a new iteration loop is triggered.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@510 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-isa simplified, by using the addr field in the client structure,
instead of a new field. This means we do not need `struct isa_*'
anymore
* All clients changed to reflect the new isa code. Many are much
simplified now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@505 7894878c-1315-0410-8ee3-d5d059ff63e0
* True SMBus host support for VIA southbridges
Supports PCI devices:
1106:3050 VT82C596 "Via Apollo Pro / Pro+"
1106:3057 VT82C686 "Via Apollo MVP4"
I have no hardware to test these..
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@498 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fixed adapter drivers to compile with the new i2c structs.
They might, or they might not work..
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@497 7894878c-1315-0410-8ee3-d5d059ff63e0
* The i2c package can no longer be compiled as part of the lm_sensors tree
* The archive of the i2c package is removed
* smbus, i2c-dev and i2c-proc modules and headers have been removed; they
are now completely integrated into the i2c package
* The fake i2c.h header has been removed; this also allowed us to remove
the ugly LM_SENSORS and TBD defines.
* A new variable I2C_HEADERS is introduced in the Makefile. This allows
us to install the i2c headers in, for example, /usr/local/include/linux.
* All files now include <linux/i2c.h> instead of "i2c.h" and "smbus.h"
Status: 'make dep' works, all the right include files are found. 'make all'
does not yet work.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@496 7894878c-1315-0410-8ee3-d5d059ff63e0
Never put a semicolon after an if :-(
I have a SiS5595 here, which reports his chip monitor address as 0x0000.
Strange thing...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@493 7894878c-1315-0410-8ee3-d5d059ff63e0
Frodo Looijaard