* Removed several superfluous (struct i2c_client *) casts (they were left
from the time we had separate structs for smbus and isa)
* Removed the internal lists of registered clients
They have not been used for quite some time now, took memory space,
and limited the maximum number of clients that could be registered.
Also removed two small Makefile errors - I am happy I caught them before
the next release!
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@582 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-isa simplified, by using the addr field in the client structure,
instead of a new field. This means we do not need `struct isa_*'
anymore
* All clients changed to reflect the new isa code. Many are much
simplified now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@505 7894878c-1315-0410-8ee3-d5d059ff63e0
* The library can now read GL518SM revision 0x00 voltages (in the worst case,
it will read zeros if the module was not inserted with readall=1)
* The readall parameter is now documented through MODULE_PARM_DESC
* Note my remarks in the TODO file
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@403 7894878c-1315-0410-8ee3-d5d059ff63e0
Also a very slight formatting improvement for the module parameters
documentation script, and a typo from the LM78 documentation removed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@393 7894878c-1315-0410-8ee3-d5d059ff63e0
* Removed unnecessary MOD_INC/DEC_USE_COUNT in host adapter drivers
(i2c-via bit-lp bit-velle)
You can now rmmod adapters even when they have registered clients.
Without this, you would have to detach the clients first. Only way of doing
this is to rmmod the client drivers, but the same drivers might be used to
access clients behind other hosts.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@347 7894878c-1315-0410-8ee3-d5d059ff63e0
It is untested as of yet; but it compiled without problem. Next step: add
support to the chip modules.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@324 7894878c-1315-0410-8ee3-d5d059ff63e0
Code written by Ludovic Drolez (ldrolez@usa.net)
All voltages are now readable for the rev 00 but the read is blocked for 10
seconds because of the needed comparisons.
Currently voltages are readable in /proc only.
This functionality can be enabled at module-load with parameter readall:
insmod gl518 readall=1
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@289 7894878c-1315-0410-8ee3-d5d059ff63e0
definitely should not load.
Also fixed GL520 detection bug. Some other bugs are probably still there.
The report is generated using a very intricate data structure. There
can easily be hidden problems. Just test, test, test :-)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@255 7894878c-1315-0410-8ee3-d5d059ff63e0
I finally merged in Adrian's man-pages. libsensors.3 is unchanged from his
version; sensors.conf.5 is heavily edited, not because he did a bad job,
but because his source material was not very well written :-). It should
now tell you more about the config file than you ever wanted to know...
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@205 7894878c-1315-0410-8ee3-d5d059ff63e0
Renamed sensors entry from "SiS 5595 Sensor-*" to "sis5595-*"
Added this name in sensors.conf.eg to use lm78 names for inputs.
Small related document updates.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@199 7894878c-1315-0410-8ee3-d5d059ff63e0
Everything is in, except the IOCTL hook (which will be pretty simple to add).
It compiles cleanly. It is not tested at all.
Also a very small fix for i2c-proc, and Makefile.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@158 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fixed FORCE_PIIX4_ENABLE bus (misspelled function call)
* Added Kyösti's mail about the VIA chipset to the doc directory, as
temporary placeholder
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@78 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark D. Studebaker