back from the address port, so the value 0xff is returned, causing
a false positive with the original test. Testing explicitly for 0x80
instead of only testing that bit 7 is set, works around it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4404 7894878c-1315-0410-8ee3-d5d059ff63e0
easier to find out which specific address causes problem if the system
freezes or the SMBus locks itself, for example.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4316 7894878c-1315-0410-8ee3-d5d059ff63e0
Default to bank register 0x07 for Super-I/O chips.
Move default bank register selection to a separate function.
Move setting/restoring bank to a separate function.
Allow dumping of shorter ranges (flat address space mode).
Limit I2C-like dumps to addresses up to 0x3fff.
Print expected ranges on range errors.
This should allow us to work with the PC87360 family of chips.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2475 7894878c-1315-0410-8ee3-d5d059ff63e0
Allow forcing of bank 0. Restore bank after dump.
This allows proper operation on Super-I/O chips.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2452 7894878c-1315-0410-8ee3-d5d059ff63e0
Replaced sys/perm.h with sys/io.h. But then it conflicted
with asm/io.h so I changed it to only use one or the other.
Hope it works.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1107 7894878c-1315-0410-8ee3-d5d059ff63e0
* i2c-isa simplified, by using the addr field in the client structure,
instead of a new field. This means we do not need `struct isa_*'
anymore
* All clients changed to reflect the new isa code. Many are much
simplified now.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@505 7894878c-1315-0410-8ee3-d5d059ff63e0
Usage: isadump <ADDR-REG> <DATA-REG>
For the default LM78, this would be `isadump 0x295 0x296' (addresses may be
specified as decimal, octal or hexadecimal).
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@144 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare