it possible to install both the old and the new libsensors and sensors,
making testing much easier. sensors3 will be renamed back to sensors before
we release.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4461 7894878c-1315-0410-8ee3-d5d059ff63e0
* No longer depend on grep. We already depend on egrep so let's use it
everywhere.
* Don't depend on awk to compute the target PWM value. Bash has an arithmetic
expression evaluation engine which does the job just fine.
* Use read instead of cat to read the sensor values. read is built-in, so
it's cheaper.
* When sysfs is used (2.6 kernel), do not postproces the sensor value reads
with cut, as it is not needed.
* Update the dependency list.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4441 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix the handling of temperature hysteresis. Hysteresis is not a
temperature limit by itself, but a property of temperature limit.
* Handle per-limit temperature alarms.
With these fixes, the ADM1032 is properly supported by the new code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4423 7894878c-1315-0410-8ee3-d5d059ff63e0
be available in Linux kernel 2.6.23. Binary compatibility is guaranteed,
source code compatibility isn't, but the incompatibility will be
spotted quickly as the prototype of the helper function
i2c_smbus_read_i2c_block_data() changed. The only problem would be if
a program is calling i2c_smbus_access() directly. Hopefully this should
be a rare case. The py-smbus binding code is in this case and will be
adjusted soon.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4419 7894878c-1315-0410-8ee3-d5d059ff63e0
back from the address port, so the value 0xff is returned, causing
a false positive with the original test. Testing explicitly for 0x80
instead of only testing that bit 7 is set, works around it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4406 7894878c-1315-0410-8ee3-d5d059ff63e0
from the openSuse sensors package. This is a good idea because the
PWM/speed relation isn't linear, and it is frequent that the speed
changes are concentrated in the low PWM range.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4381 7894878c-1315-0410-8ee3-d5d059ff63e0
identify sysfs entries. Reasons for this rewrite / bugs fixed:
-Don't give features like alarms / sensor type / fault flag a
compute mapping only a normal mapping
-Don't generate features for sysfs entries like uvent, modalias, etc.
instead only generate features for features known by
sensors_feature_get_type()
-Sort the list of found features logically instead of sorted in alphabet order
of the sysfs entry. So now it starts with all in entries, then all fan and
then all temp. Just like the order of most entries in lib/chips.c. Also
this means that it now contains in0 - in10 in that order and not in0, in10,
in1 - in9
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4368 7894878c-1315-0410-8ee3-d5d059ff63e0
abituguru seems to work well with the new dynamic chip support and generic
chip printroutines. note: the abituguru code should be completly removed in
the future.
-comment k8temp entry in lib/chips.c and prog/sensors/main.c, as the
k8temp seems to work well with the new dynamic chip support and generic
chip printroutines. note: the k8temp code should be completly removed in
the future.
-make the match for the subtype exact instead of a strncmp, otherwise
an alarm_enable flag gets classified as an alarm, leading to all sensors who
have their alarm enabled getting an alarm reported, as the alarm_enabled gets
read as alarm.
-and do the same for the _input match to check if this is a main or subfeature
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4367 7894878c-1315-0410-8ee3-d5d059ff63e0
* Disable debugging by default
* Add support for non-i2c drivers
* More tolerant config file parsing (for some reason pwmconfig
adds unneeded spaces, it should probably be fixed but it's always
better to be tolrant nevertheless)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4295 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare