and 2) make the quoted escape sequence rules a little more compact. The first
cleanup is said to yield a slight speedup according to the flex manual - I
didn't bother to measure it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4236 7894878c-1315-0410-8ee3-d5d059ff63e0
uncovered three different bugs. This changeset fixes them all. It also
updates the sensors.conf(5) man page to be unambiguous regarding the
requirement for whitespace between elements.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4235 7894878c-1315-0410-8ee3-d5d059ff63e0
I2C algorithms no longer have names in Linux 2.6, and anyway they are
implementation details user-space doesn't care about. No third party
application is known to have ever used this particular feature of
libsensors. "sensord" and "sensors" no longer do.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4208 7894878c-1315-0410-8ee3-d5d059ff63e0
sensord: Add pc87247 support (fans only).
sensors: Add pc87247 support (fans only).
sensors-detect: Advertise the upcoming pc87427 driver.
Thanks to Amir Habibi at Candelis for setting up a test system.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4196 7894878c-1315-0410-8ee3-d5d059ff63e0
input order to match the Linux 2.6 driver.
libsensors: Change vt1211 temp3-7 magnitude from 1 to 3.
sensors.conf.eg: Adjust the vt1211 section to match the new driver
interface.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4168 7894878c-1315-0410-8ee3-d5d059ff63e0
to confuse users a lot, to report the lack of hwmon driver as an error.
prog/sensors: Clearer error messages when no sensors are found. The
most frequent cause is a lack of drivers, not procfs/sysfs problems.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4159 7894878c-1315-0410-8ee3-d5d059ff63e0
libsensors. The Linux 2.6 adm1026 driver uses the standard numebring
(from 1 to 8). Map fan0 to fan8 to make things work while keeping
confusion to the minimum (hopefully.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4118 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0
First ran .../scripts/Lindent from Linux 2.6.x, then fixed up some
things that were particularly ugly. Verified the final result by
rebuilding and running 'objdump -d' on the before and after; there
were no differences.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4073 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch enables the reading of temp1 (Reading3) from the VT1211.
Reading3 returns the V1211's internal temperature.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3246 7894878c-1315-0410-8ee3-d5d059ff63e0
in line with the new 2.6 driver. The most important changes are temp
inputs renumbering, and conversion formulas changes, because part of the
conversions are now done by the driver as required by the interface
standard.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3194 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch makes optional the sysfs support in libsensors. The default is to
*disable* sysfs support if a 2.4.x kernel is detected, for all other versions,
support will be enabled. This can be overridden in the top-level Makefile.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3096 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch replaces the I2C chip enumeration (through sysfs) in lib/proc.c
with new functions in lib/sysfs (using libsysfs). The patch also updates
the init code accordingly.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3095 7894878c-1315-0410-8ee3-d5d059ff63e0
This patch replaces the I2C bus enumeration (through sysfs) in lib/proc.c
with a new function in lib/sysfs (using libsysfs). The patch also updates
the init code accordingly.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3094 7894878c-1315-0410-8ee3-d5d059ff63e0
Mark M. Hoffman