to print the labels. This is both a fix (beforehand we would leave
enough room to print possibly long subfeature names, even though we
do not actually print subfeature names at all) and a significant
performance boost. This change alone shrinks the CPU cost of a sensors
run by 4.5%.
I am still worried that this feature causes us to allocate each label
string twice, but I guess this overhead is now acceptable.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4715 7894878c-1315-0410-8ee3-d5d059ff63e0
* do_sets, do_raw and hide_adapter are only used in main.c and could
thus be declared static.
* fahrenheit and degstr are used in chips.c as well, so they should be
declared in a header file.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4713 7894878c-1315-0410-8ee3-d5d059ff63e0
longer need to build an array from the chip names passed on the
command line. Instead, we can process them one after the other
directly. This saves some memory and allows for minor code cleanups.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4703 7894878c-1315-0410-8ee3-d5d059ff63e0
caller select which subset of chips it wants. This is slightly better
size-wise than letting all applications do the filtering by themselves.
This will change the way the command line parameters of "sensors" are
interpreted. Beforehand, the chips were always returned in the order
in which they were listed by the library. Also, each chip could be listed
only once. From now on, the chips will be listed in the order in which
they are passed on the command line, which I think makes more sense. A
side effect is that chips can be listed more than once, if that's what
the user asks for. Not very useful though.
This change makes it possible to make sensors_match_chip() internal
to the library. Filtering the list of chips returned by
sensors_get_detected_chips() was the last known external use for this
function.
This patch looks much bigger than it really is, but the largest part is
really only code reindentation.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4701 7894878c-1315-0410-8ee3-d5d059ff63e0
Instead, the application will have to call sensors_exit() explicitly
before calling sensors_init() again. Most applications don't offer
any way to reload the configuration file, so better optimize for the
initial load.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4693 7894878c-1315-0410-8ee3-d5d059ff63e0
i2c-centric. Make it more neutral so that we can cleanly support
additional bus types such as SPI or One-Wire.
This first part introduces sensors_bus_id, and updates
sensors_chip_name to use it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4686 7894878c-1315-0410-8ee3-d5d059ff63e0
sensors_parse_chip_name(). sensors_snprintf_chip_name() converts
a chip name from its internal representation to a human readable
string. So far, each user program had to reimplement this function.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4676 7894878c-1315-0410-8ee3-d5d059ff63e0
introduced when getting rid of the i2cdetect dependency. I had
forgotten that i2c-isa was not listed in class i2c-dev but was
still listed in class i2c-adapter.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4650 7894878c-1315-0410-8ee3-d5d059ff63e0
delegating the task to the user applications.
For now, I am calling sensors_get_ignored() in
sensors_get_all_features(), because this is the least intrusive way.
This is in no way optimal though, it would be better to not add
ignored features to the feature list in the first place. However,
doing so would require that the configuration file is read before
sysfs is scanned for features, which isn't currently the case. So
this improvement is left for later.
Note that this patch adds a small cost in terms of performance. This
is because we now honor ignore statements on all features (main ones
and subfeatures) while in practice "sensors" was only checking for
main features. It would be trivial to stop checking for subfeatures,
but it seems to me that supporting ignore on subfeatures is a good
move, as the user may actually want to ignore a specific subfeature.
Individual alarms come to mind. This will also be handy to debug the
generic print code in "sensors".
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4644 7894878c-1315-0410-8ee3-d5d059ff63e0
immediately follow their main feature. This makes it possible to simplify
sensors_get_all_features() quite a bit. We no longer need to maintain
separate pointers for the last main feature and the last subfeature,
we can simply walk the list linearly.
Note that I am still not entirely happy with this API. It was obviously
designed for debugging purposes (sensors -u) and without performance
concernes nor interface cleanliness in mind. I believe that we want to
tag main features and subfeatures as such, and let the application ask
specifically for the list of main features, and for each feature, for
its list of subfeatures (i.e. two functions instead of one.)
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4643 7894878c-1315-0410-8ee3-d5d059ff63e0
first called during the library initialization to generate the feature
tables. Then it is called again by sensors itself. This is because we
do not store the result the first time. I propose that we add a type
field to struct sensors_feature_data, where libsensors would store
the result of sensors_feature_get_type(). That way, the application
can get the information without calling sensors_feature_get_type()
again.
This change has the following benefits:
* Obviously, a small speed-up.
* sensors_feature_get_type() can be removed from the public interface.
This means that we can turn it into something that fits the
libsensors needs better, allowing for more optimizations (see next
patches.)
Note: the patch looks bigger that it really is, because I had to move
definitions around in sensors.h.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4629 7894878c-1315-0410-8ee3-d5d059ff63e0
if we discard them later, their presence in the list can prevent the
"no sensors found" event from triggering. It also causes the script to
suggest loading i2c bus drivers which are not needed for hardware
monitoring.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4610 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare