and sensors_chip_features_list arrays tend to track the same information.
So it's much more simple, and more efficient, to have a single array. I
decided to keep sensors_proc_chips, because it already has memory management
helpers. One nice side effect is that the arbitrary limit to the number of
supported chips is now gone. Another one is that some of the memory leaks
were fixed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4510 7894878c-1315-0410-8ee3-d5d059ff63e0
sensors_chip_features_list[]. Using only the prefix (as was done before)
makes it impossible to properly support multiple chips with the same prefix
but a different feature set.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4508 7894878c-1315-0410-8ee3-d5d059ff63e0
it possible to install both the old and the new libsensors and sensors,
making testing much easier. sensors3 will be renamed back to sensors before
we release.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4461 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix the handling of temperature hysteresis. Hysteresis is not a
temperature limit by itself, but a property of temperature limit.
* Handle per-limit temperature alarms.
With these fixes, the ADM1032 is properly supported by the new code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4423 7894878c-1315-0410-8ee3-d5d059ff63e0
identify sysfs entries. Reasons for this rewrite / bugs fixed:
-Don't give features like alarms / sensor type / fault flag a
compute mapping only a normal mapping
-Don't generate features for sysfs entries like uvent, modalias, etc.
instead only generate features for features known by
sensors_feature_get_type()
-Sort the list of found features logically instead of sorted in alphabet order
of the sysfs entry. So now it starts with all in entries, then all fan and
then all temp. Just like the order of most entries in lib/chips.c. Also
this means that it now contains in0 - in10 in that order and not in0, in10,
in1 - in9
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4368 7894878c-1315-0410-8ee3-d5d059ff63e0
abituguru seems to work well with the new dynamic chip support and generic
chip printroutines. note: the abituguru code should be completly removed in
the future.
-comment k8temp entry in lib/chips.c and prog/sensors/main.c, as the
k8temp seems to work well with the new dynamic chip support and generic
chip printroutines. note: the k8temp code should be completly removed in
the future.
-make the match for the subtype exact instead of a strncmp, otherwise
an alarm_enable flag gets classified as an alarm, leading to all sensors who
have their alarm enabled getting an alarm reported, as the alarm_enabled gets
read as alarm.
-and do the same for the _input match to check if this is a main or subfeature
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4367 7894878c-1315-0410-8ee3-d5d059ff63e0
memory as part of another structure. This rather large patch fixes that by
making the smaller piece an explicit member of the larger.
I brought this patch into sync with the latest SVN, and tested it by comparing
objects files from the tree pre- and post- patch.
The remaining 99% of the credit goes to Bob Schlärmann <bob2@dsv.nl> for
creating the original patch... thanks Bob!
* Bob Schlärmann <bob2@dsv.nl> [2006-12-24 18:29:39 +0100]:
> The following patch changes all of the lib/chips.c entries and any function
> that uses sensors_chip_feature. Most of the conversion was done through a
> perl script, so if you don't agree with the syntax it'll be easy to change.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4287 7894878c-1315-0410-8ee3-d5d059ff63e0
attribute, falling back to the device's "name" attribute for
compatibility only. This change is needed to match ongoing cleanups in
Linux 2.6's i2c-core. i2c adapters will soon be class devices only, the
legacy i2c_adapter devices and driver are being removed.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4267 7894878c-1315-0410-8ee3-d5d059ff63e0
and 2) make the quoted escape sequence rules a little more compact. The first
cleanup is said to yield a slight speedup according to the flex manual - I
didn't bother to measure it.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4236 7894878c-1315-0410-8ee3-d5d059ff63e0
uncovered three different bugs. This changeset fixes them all. It also
updates the sensors.conf(5) man page to be unambiguous regarding the
requirement for whitespace between elements.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4235 7894878c-1315-0410-8ee3-d5d059ff63e0
Jean Delvare