it possible to install both the old and the new libsensors and sensors,
making testing much easier. sensors3 will be renamed back to sensors before
we release.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4461 7894878c-1315-0410-8ee3-d5d059ff63e0
* Fix the handling of temperature hysteresis. Hysteresis is not a
temperature limit by itself, but a property of temperature limit.
* Handle per-limit temperature alarms.
With these fixes, the ADM1032 is properly supported by the new code.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4423 7894878c-1315-0410-8ee3-d5d059ff63e0
identify sysfs entries. Reasons for this rewrite / bugs fixed:
-Don't give features like alarms / sensor type / fault flag a
compute mapping only a normal mapping
-Don't generate features for sysfs entries like uvent, modalias, etc.
instead only generate features for features known by
sensors_feature_get_type()
-Sort the list of found features logically instead of sorted in alphabet order
of the sysfs entry. So now it starts with all in entries, then all fan and
then all temp. Just like the order of most entries in lib/chips.c. Also
this means that it now contains in0 - in10 in that order and not in0, in10,
in1 - in9
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4368 7894878c-1315-0410-8ee3-d5d059ff63e0
abituguru seems to work well with the new dynamic chip support and generic
chip printroutines. note: the abituguru code should be completly removed in
the future.
-comment k8temp entry in lib/chips.c and prog/sensors/main.c, as the
k8temp seems to work well with the new dynamic chip support and generic
chip printroutines. note: the k8temp code should be completly removed in
the future.
-make the match for the subtype exact instead of a strncmp, otherwise
an alarm_enable flag gets classified as an alarm, leading to all sensors who
have their alarm enabled getting an alarm reported, as the alarm_enabled gets
read as alarm.
-and do the same for the _input match to check if this is a main or subfeature
git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4367 7894878c-1315-0410-8ee3-d5d059ff63e0
The algorithm names are no more available since Linux 2.6, and were not
very useful anyway.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4206 7894878c-1315-0410-8ee3-d5d059ff63e0
We don't need to strdup() the file names, we can use them directly.
As a side effect, this fixes a memory leak which was happening if
option -c was specified more than once on the command line.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4205 7894878c-1315-0410-8ee3-d5d059ff63e0
sensord: Add pc87247 support (fans only).
sensors: Add pc87247 support (fans only).
sensors-detect: Advertise the upcoming pc87427 driver.
Thanks to Amir Habibi at Candelis for setting up a test system.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4196 7894878c-1315-0410-8ee3-d5d059ff63e0
to confuse users a lot, to report the lack of hwmon driver as an error.
prog/sensors: Clearer error messages when no sensors are found. The
most frequent cause is a lack of drivers, not procfs/sysfs problems.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4159 7894878c-1315-0410-8ee3-d5d059ff63e0
Also update to display the (beep) properly due to the fact that the
w83791d beep enable mask is different than the alarm mask.
Patch from Sven Anders and Charles Spirakis.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4096 7894878c-1315-0410-8ee3-d5d059ff63e0
with other functions on some IT87xxF variants so the Linux 2.6 driver may
not present them forever.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4093 7894878c-1315-0410-8ee3-d5d059ff63e0
IT8712F so there's not much to do. The most significant difference is that
fan speeds are now reported as 16-bit values, without fan clock dividers.
For this reason, I made the fan_divs optional in sensors. I also made the
fans themselves optional, as I noticed that a number of motherboards don't
use (and don't enable) fan3.
I've made a separate section (chip "it8716-*") in sensors.conf.eg, because
new motherboards tend to have different wirings (e.g. negative voltage
lines are not monitored) so this will make for saner defaults.
Thanks to Stian Oksavik for testing.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4083 7894878c-1315-0410-8ee3-d5d059ff63e0