Kernel driver `w83l785ts.o' =========================== Status: Preliminary, almost not tested Supported chips: * Winbond W83L785TS-S Prefix: `w83l785ts' Addresses scanned: I2C 0x2e Data sheet: Publicly available at the Winbond USA website http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf Author: Jean Delvare License: GPL Module Parameters ----------------- * force: short array (min = 1, max = 48) List of adapter,address pairs to boldly assume to be present * force_w83l785ts: short array (min = 1, max = 48) List of adapter,address pairs which are unquestionably assumed to contain a `w83l785ts' chip * probe: short array (min = 1, max = 48) List of adapter,address pairs to scan additionally * probe_range: short array (min = 1, max = 48) List of adapter,start-addr,end-addr triples to scan additionally * ignore: short array (min = 1, max = 48) List of adapter,address pairs not to scan * ignore_range: short array (min = 1, max = 48) List of adapter,start-addr,end-addr triples not to scan Description ----------- The W83L785TS-S is a digital temperature sensor. It senses the temperature of a single external diode. The high limit is defined as 85 or 100 degrees C through a combination of external resistors, so the user cannot change it. All temperature values are given in degrees Celcius. Resolution is 1.0 degree. See the data sheet for details. The w83l785ts driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return 'old' values. Chip Features ------------- Chip 'w83l785ts' LABEL LABEL CLASS COMPUTE CLASS MODE MAGN temp - - R- 0 temp_high temp temp R- 0 LABEL FEATURE SYMBOL SYSCTL FILE:N temp SENSORS_W83L785TS_TEMP temp:3 temp_high SENSORS_W83L785TS_TEMP_OVER temp:1