Kernel driver `i2c-sis5595.o' Status: Untested Alpha - may not work at all Supported adapters: * Silicon Integrated Systems Corp. SiS5595 Southbridge Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. Author: Frodo Looijaard and Mark D. Studebaker Module Parameters ----------------- force_addr=0xaddr Set the I/O base address. Useful for boards that don't set the address in the BIOS. Does not do a PCI force; the device must still be present in lspci. Don't use this unless the driver complains that the base address is not set. Example: 'modprobe i2c-sis5595 force_addr=0x290' Description ----------- i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595 southbridges. WARNING: If you are trying to access the integrated sensors on the SiS5595 chip, you want the sis5595.o driver for those, not this driver. This driver is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP drivers to access chips on the bus. To install this driver, simply do # modprobe i2c-sis5595 This driver is ALPHA!!! Please send feedback to us at sensors@stimpy.netroedge.com.