### Import note: separately listed for this motherboard, merged with config: # sensors-detect will report a W83627DHG device and suggest loading the # w83627ehf driver. However this motherboard has an ACPI BIOS which accesses # the W83627DHG device already, so using the w83627ehf driver is not safe and # thus discouraged. ################## ### Sensors configuration for Asus P5PE-VM motherboard ### 2014-02-28, ianp ### Comments are welcome. chip "w83627ehf-*" ### Voltages label in1 "+12V" ignore in4 # ignored (not used?) label in5 "+5V" ignore in6 # ignore these ignore in9 # as well (not used) ignore cpu0_vid # Always at 0 in my case, so ignore it ### Scale +5V and +12V. compute in5 @*(1+22/10), @/(1+22/10) compute in1 @*(1+56/10), @/(1+56/10) ### Set in0 according to CPU nominal voltage. set in0_min 1.2000 set in0_max 1.3375 set in5_min 5 * 0.95 set in5_max 5 * 1.05 set in1_min 12 * 0.95 set in1_max 12 * 1.05 ### Temperatures # temp3 is unidentified label temp1 "M/B Temp" label temp2 "CPU Temp" ### Set according to preference. set temp1_max 60 set temp1_max_hyst 55 set temp2_max 60 set temp2_max_hyst 55 ### Fans ### Ignore fan3 and fan5. There are ### only 2 fan connectors on this board. ### fan4 is missing. label fan1 "CHA Fan" label fan2 "CPU Fan" ignore fan3 ignore fan5 ### Set according to preference. set fan1_min 0 set fan2_min 900