# Example configuration for the SuperMicro PDSMi+.
# Contributed by Romain Dolbeau & Jean Delvare


# settings for the supermicro PDSMi+
#
# Notes:
# 1) You need lm-sensors >= 2.10.2, otherwise you get an error about
#    missing temp6.
#
# Originally written by Romain Dolbeau <romain@dolbeau.org>
# Uses at your own risk !
chip "w83793-i2c-*-2f"

# 0x10, CPU Core
    label in0 "CPU Core"
# 0x11, unconnected according to support, 1.5V in BIOS ?
    label in1 "+1.5V"
    set in1_min 1.5*0.95
    set in1_max 1.5*1.05
# 0x12, unconnected according to support, VTT=1.2V in BIOS ?
    label in2 "VTT"
    set in2_min 1.2*0.95
    set in2_max 1.2*1.05
# 0x14, -12V
    label in3 "-12V"
#    From Supermicro support information...
#    compute in3 (((@/8)*18500)/256)-16, (((@+16)*256)/18500)*8
#    ... but this from Jean Delvare works better in pratice
    compute in3 (@ * 5.14) - 14.91, (@ + 14.91) / 5.14
    set in3_min -12*1.05
    set in3_max -12*0.95
# 0x15, DIMM
    label in4 "DIMM"
# 0x16, +3.3V
    label in5 "+3.3V"
    set in5_min 3.3*0.95
    set in5_max 3.3*1.05
# 0x17, +12V
    label in6 "+12V"
    compute in6 @*12,@/12
    set in6_min 12*0.95
    set in6_max 12*1.05
# Ox18, +5V
    label in7 "+5V"
    compute in7 @-0.15,@+0.15
    set in7_min 5*0.95
    set in7_max 5*1.05
# 0x19, 5VSB
    label in8 "5VSB"
    compute in8 @-0.15,@+0.15
    set in8_min 5*0.95
    set in8_max 5*1.05
# 0x1a, Battery Voltage
    label in9 "VBAT"

    label temp1 "CPU Temp"
    ignore temp2
    ignore temp3
    ignore temp4
# System Temp used to live at temp5, but was moved to temp6 for some reason
    ignore temp5
#    label temp5 "System Temp"
#    ignore temp6
    label temp6 "System Temp"

# 6 connected
    label fan1 "fan1"
    label fan2 "fan2"
    label fan3 "fan3"
    label fan4 "fan4"
    label fan5 "fan5"
# apparently, fan6 is skipped and fan7 is used instead for CPU fan,
# at least that's how I understand Supermicro data.
    ignore fan6
    label fan7 "CPU fan"
    ignore fan8
    ignore fan9
    ignore fan10
    ignore fan12
    ignore fan12
# you should ignore the last 3 or 4, in 1U rackmount system