# Originally contributed by Gary E. Miller, cleaned up by Jean Delvare.


# /etc/sensors.d/X7DB8
# settings for the supermicro X7DB8
# originally written by Gary E. Miller <gem@rellim.com>
# use at your own risk !
# Date: 30 May 2012

# Here's the info as supplied by Supermicro:
#
# Bus Type = SMBus
# One W83793G
# 
# Windbond W83793G, Slave Address=0x2f (0x5E in 8-Bit format)
# =============================================================
# Fan1 Fan Speed, Offset 0x23, 0x24			RPM = 1350000/Data
# Fan2 Fan Speed, Offset 0x25, 0x26			RPM = 1350000/Data
# Fan3 Fan Speed, Offset 0x27, 0x28			RPM = 1350000/Data
# Fan4 Fan Speed, Offset 0x29, 0x2a			RPM = 1350000/Data
# Fan5 Fan Speed, Offset 0x2b, 0x2c			RPM = 1350000/Data
# Fan6 Fan Speed, Offset 0x2d, 0x2e			RPM = 1350000/Data
# Fan7/CPU1 Fan Speed, Offset 0x2f, 0x30		RPM = 1350000/Data
# Fan8/CPU2 Fan Speed, Offset 0x31, 0x32		RPM = 1350000/Data
# CPU1 Core Voltage, Offset 0x10			Voltage = Data* 0.008	
# CPU2 Core Voltage, Offset 0x11			Voltage = Data* 0.008
# -12V Voltage, Offset 0x14				Voltage = ((Data*0.016)- (2.048*(232./260.)))/(1-(232./260.))
# +1.5V Voltage, Offset 0x15				Voltage = Data* 0.016
# +3.3V Voltage, Offset 0x16				Voltage = Data* 0.016
# +12V Voltage, Offset 0x17				Voltage = Data* 0.008/ (10./120.)
# +5V Voltage, Offset 0x18				Voltage = Data* 0.024
# 5Vsb Voltage, Offset 0x19				Voltage = Data* 0.024
# Battery Voltage, Offset 0x1a				Voltage = Data* 0.016
# CPU1 CoreA (PECI Agent1) Temperature, Offset 0x1c	Temperature = Data
# CPU1 CoreB (PECI Agent2) Temperature, Offset 0x1d	Temperature = Data
# CPU2 CoreA (PECI Agent3) Temperature, Offset 0x1e	Temperature = Data
# CPU2 CoreB (PECI Agent4) Temperature, Offset 0x1f	Temperature = Data
# System Temperature, Offset 0x20			Temperature = Data
# Chassis Intrusion, Offset 0x44, BitMask 0x40		1 = Bad, 0 = Good
# 
# 
# Windbond W83627HF
# =============================================================
# Power Supply Failure, GP11(From W83627HF)		1 = Good, 0 = Bad
#

chip "w83627hf-isa-0290"
    # no driver access to GP11, so I turned off everything.
    ignore in0
    ignore in1
    ignore in2
    ignore in3
    ignore in4
    ignore in5
    ignore in6
    ignore in7
    ignore in8
    ignore cpu0_vid
    ignore fan1
    ignore fan2
    ignore fan3
    ignore temp1
    ignore temp2
    ignore temp3



bus "i2c-0" "SMBus I801 adapter at 1100"

chip "w83793-i2c-0-2f"

	label fan7	"CPU1 Fan"
	label fan8	"CPU2 Fan"

# Voltages ; note that in the table above, the .008, .016, and .024 factors are
# already computed in the driver...
	label in0 "Vcore1"
	label in1 "Vcore2"
	ignore in2
	label in3 "-12V"
	label in4 "+1.5V"
	label in5 "+3.3V"
	label in6 "+12V"
	label in7 "+5V"
	label in8 "5Vsb"
	label in9 "Vbat"

	label temp1 "CPU1 CoreA"
	label temp2 "CPU1 CoreB"
	label temp3 "CPU2 CoreA"
	label temp4 "CPU2 CoreB"
	label temp5 "M/B Temp"

	compute in3  (@ - (2.048*(232/260)))/(1-(232/260)), (@*(1-(232/260)))+(2.048*(232/260))
	compute in6  @ * 12 , @ / 12


	# CPUs
	set in0_min  0.82
	set in0_max  1.35
	set in1_min  0.82
	set in1_max  1.35

	# -12V, 10%
	set in3_max  -12.0 * 0.90
	set in3_min  -12.0 * 1.10
	# +3.3V, 5%
	set in5_min  3.3 * 0.95
	set in5_max  3.3 * 1.05
	# +12V, 5%
	set in6_min  12.0 * 0.95
	set in6_max  12.0 * 1.05
	# +5V, 5%
	set in7_min  5.0 * 0.95
	set in7_max  5.0 * 1.05
	# 5Vsb, 10%
	set in8_min  5.0 * 0.90
	set in8_max  5.0 * 1.10
	# Vbat, 10%
	set in9_min  3.0 * 0.90
	set in9_max  3.0 * 1.10