/* smbus.c - A Linux module for reading sensor data. Copyright (c) 1998 Frodo Looijaard and Philip Edelbrock This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Note: New PCI (non-BIOS) interface introduced in 2.1.54! */ #include #include #include #include #include #include "smbus.h" #include "version.h" #include "compat.h" #include "piix4.h" static int piix4_init(void); static int piix4_cleanup(void); static int piix4_setup(void); static s32 piix4_access(u8 addr, char read_write, u8 command, int size, union smbus_data * data); /* Internal functions */ static void do_pause( unsigned int amount ); static int SMBus_PIIX4_Transaction(void); #ifdef MODULE extern int init_module(void); extern int cleanup_module(void); #endif /* MODULE */ static struct smbus_adapter piix4_adapter; static int piix4_initialized; /* Global variables -- At least some of these may be modified/moved later */ static unsigned short PIIX4_smba = 0; static struct semaphore smbus_piix4_sem = MUTEX; /* Detect whether a PIIX4 can be found, and initialize it, where necessary. Return -ENODEV if not found. */ int piix4_setup(void) { int error_return=0; unsigned char temp; #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,0)) struct pci_dev *PIIX4_dev; #else unsigned char PIIX4_bus, PIIX4_devfn; #endif if (pci_present() == 0) { printk("SMBus: Error: No PCI-bus found!\n"); error_return=-ENODEV; } else { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,0)) PIIX4_dev = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, NULL); if(PIIX4_dev == NULL) { #else if(pcibios_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, 0, &PIIX4_bus, &PIIX4_devfn)) { #endif printk("SMBus: Error: Can't detect PIIX4!\n"); error_return=-ENODEV; } else { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,0)) /* For some reason, pci_read_config fails here sometimes! */ pcibios_read_config_word(PIIX4_dev->bus->number, PIIX4_dev->devfn | 3, SMBBA, &PIIX4_smba); #else pci_read_config_word_united(PIIX4_dev, PIIX4_bus ,PIIX4_devfn | 3, SMBBA,&PIIX4_smba); #endif PIIX4_smba &= 0xfff0; if (check_region(PIIX4_smba, 8)) { printk("PIIX4_smb region 0x%x already in use!\n", PIIX4_smba); error_return=-ENODEV; } else { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,0)) pcibios_read_config_byte(PIIX4_dev->bus->number, PIIX4_dev->devfn | 3, SMBHSTCFG, &temp); #else pci_read_config_byte_united(PIIX4_dev, PIIX4_bus, PIIX4_devfn | 3, SMBHSTCFG, &temp); #endif #ifdef FORCE_PIIX4_ENABLE /* This should never need to be done, but has been noted that many Dell machines have the SMBus interface on the PIIX4 disabled!? NOTE: This assumes I/O space and other allocations WERE done by the Bios! Don't complain if your hardware does weird things after enabling this. :') Check for Bios updates before resorting to this. */ if ((temp & 1) == 0) { #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,0)) pcibios_write_config_byte(PIIX4_dev->bus->number, PIIX4_dev->devfn | 3, SMBHSTCFG, temp | 1); #else pcibios_write_config_byte(PIIX4_bus, PIIX4_devfn | 3, SMBHSTCFG, temp | 1); #endif printk("SMBus: WARNING: PIIX4 SMBus interface has been FORCEFULLY ENABLED!!\n"); /* Update configuration value */ pci_read_config_byte_united(PIIX4_dev, PIIX4_bus, PIIX4_devfn | 3, SMBHSTCFG, &temp); /* Note: We test the bit again in the next 'if' just to be sure... */ } #endif if ((temp & 1) == 0) { printk("SMBUS: Error: Host SMBus controller not enabled!\n"); piix4_initialized=0; error_return=-ENODEV; } else { /* Everything is happy, let's grab the memory and set things up. */ request_region(PIIX4_smba, 8, "SMBus"); piix4_initialized=1; } #ifdef DEBUG if ((temp & 0x0E) == 8) printk("SMBUS: PIIX4 using Interrupt 9 for SMBus.\n"); else if ((temp & 0x0E) == 0) printk("SMBUS: PIIX4 using Interrupt SMI# for SMBus.\n"); else printk( "SMBUS: PIIX4: Illegal Interrupt configuration (or code out of date)!\n"); #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,0)) pcibios_read_config_byte(PIIX4_dev->bus->number, PIIX4_dev->devfn | 3, SMBREV, &temp); #else pci_read_config_byte_united(PIIX4_dev, PIIX4_bus, PIIX4_devfn | 3, SMBREV, &temp); #endif printk("SMBUS: SMBREV = 0x%X\n",temp); #endif } } if (error_return) printk("SMBus setup failed.\n"); #ifdef DEBUG else printk("PIIX4_smba = 0x%X\n",PIIX4_smba); #endif } return error_return; } /* Internally used pause function */ void do_pause( unsigned int amount ) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(amount); } /* Another internally used function */ int SMBus_PIIX4_Transaction(void) { int temp; int result=0; int timeout=0; /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) != 0x00) { #ifdef DEBUG printk("SMBus: SMBus_Read: SMBus busy (%02x). Resetting... ",temp); #endif outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { #ifdef DEBUG printk("Failed! (%02x)\n",temp); #endif return -1; } else { #ifdef DEBUG printk("Successfull!\n"); #endif } } /* start the transaction by setting bit 6 */ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); /* Wait for a fraction of a second! (See PIIX4 docs errata) */ do_pause(1); /* Poll Host_busy bit */ temp=inb_p(SMBHSTSTS) & 0x01; while (temp & (timeout++ < MAX_TIMEOUT)) { /* Wait for a while and try again*/ do_pause(1); temp = inb_p(SMBHSTSTS) & 0x01; } /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { #ifdef DEBUG printk("SMBus: SMBus_Read: SMBus Timeout!\n"); result = -1; #endif } temp = inb_p(SMBHSTSTS); if (temp & 0x10) { result = -1; #ifdef DEBUG printk("SMBus error: Failed bus transaction\n"); #endif } if (temp & 0x08) { result = -1; printk("SMBus error: Bus collision! SMBus may be locked until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & 0x04) { result = -1; #ifdef DEBUG printk("SMBus error: no response!\n"); #endif } if (inb_p(SMBHSTSTS) != 0x00) outb_p( inb(SMBHSTSTS), SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { #ifdef DEBUG printk("SMBus error: Failed reset at end of transaction (%02x)\n",temp); #endif } return result; } /* Return -1 on error. See smbus.h for more information */ s32 piix4_access(u8 addr, char read_write, u8 command, int size, union smbus_data * data) { int i,len; down(&smbus_piix4_sem); outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); switch(size) { case SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); break; case SMBUS_BYTE: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); if (read_write == SMBUS_WRITE) outb_p(command, SMBHSTCMD); break; case SMBUS_BYTE_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == SMBUS_WRITE) outb_p(data->byte,SMBHSTDAT0); break; case SMBUS_WORD_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == SMBUS_WRITE) { outb_p(data->word & 0xff,SMBHSTDAT0); outb_p((data->word & 0xff00) >> 8,SMBHSTDAT1); } break; case SMBUS_BLOCK_DATA: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == SMBUS_WRITE) { len = data->block[0]; if (len < 0) len = 0; if (len > 32) len = 32; outb_p(len,SMBHSTDAT0); i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i ++) outb_p(data->block[i],SMBBLKDAT); break; } } if (SMBus_PIIX4_Transaction()) { /* Error in transaction */ up(&smbus_piix4_sem); return -1; } if ((read_write == SMBUS_WRITE) || (size == SMBUS_QUICK)) { up(&smbus_piix4_sem); return 0; } } int piix4_init(void) { int res; printk("piix4.o version %s (%s)\n",LM_VERSION,LM_DATE); #ifdef DEBUG /* PE- It might be good to make this a permanent part of the code! */ if (piix4_initialized) { printk("piix4.o: Oops, piix4_init called a second time!\n"); return -EBUSY; } #endif piix4_initialized = 0; if ((res = piix4_setup())) { printk("piix4.o: PIIX4 not detected, module not inserted.\n"); piix4_cleanup(); return res; } piix4_initialized ++; strcpy(piix4_adapter.name,"SMBus PIIX4 adapter"); piix4_adapter.id = ALGO_SMBUS | SMBUS_PIIX4; piix4_adapter.algo = &smbus_algorithm; piix4_adapter.smbus_access = &piix4_access; if ((res = smbus_add_adapter(&piix4_adapter))) { printk("piix4.o: Adapter registration failed, module not inserted.\n"); piix4_cleanup(); return res; } piix4_initialized++; printk("piix4.o: PIIX4 bus detected and initialized\n"); return 0; } int piix4_cleanup(void) { int res; if (piix4_initialized >= 2) { if ((res = smbus_del_adapter(&piix4_adapter))) { printk("piix4.o: smbus_del_adapter failed, module not removed\n"); return res; } else piix4_initialized=0; } if (piix4_initialized >= 1) { if (piix4_initialized) { release_region(PIIX4_smba, 8); piix4_initialized=0; } } return 0; } #ifdef MODULE MODULE_AUTHOR("Frodo Looijaard and Philip Edelbrock "); MODULE_DESCRIPTION("PIIX4 SMBus driver"); int init_module(void) { return piix4_init(); } int cleanup_module(void) { return piix4_cleanup(); } #endif /* MODULE */