lm-sensors/prog/pwm/vt1211_pwm

#!/bin/bash
#
# vt1211_pwm - Manually control the PWM outputs of the VIA vt1211 Super-I/O
#
# Copyright (C) 2008 Juerg Haefliger (juergh at gmail.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#

function usage
{
    echo "Usage: vt1211_pwm -i <pwm> | -r <pwm> | -s <pwm>,<val>"
    echo
    echo "DESCRIPTION"
    echo "   This tool provides manual control of the PWM outputs of the VIA "
    echo "   vt1211 Super-I/O."
    echo
    echo "OPTIONS"
    echo "   -d               Display the current PWM settings of the vt1211."
    echo "   -i <pwm>         Initialize the PWM output for manual control."
    echo "   -r <pwm>         Restore the PWM output to the original settings."
    echo "   -s <pwm>,<val>   Set the PWM output duty-cycle. "
    echo
    echo "WITH"
    echo "   <pwm>   PWM output (1-2)."
    echo "   <val>   PWM duty-cycle (0-255)."
    echo
    exit 2
}

function set_attr
{
    local tmp
    read tmp < $1
    echo "echo $tmp > $1"
    echo $2 > $1
}

# check if we have the right permissions to run
if [ $(whoami) != "root" ] ; then
    echo "You must be root to run this script."
    exit 1
fi

# parse the command line options
action=
nr=1
val=0
while getopts di:r:s: opt ; do
    [ -z "$action" ] || usage
    case $opt in
	d)  action="display"
	    ;;
	i)  action="init"
	    nr=$OPTARG
	    ;;
	r)  action="restore"
	    nr=$OPTARG
	    ;;
	s)  action="set"
	    nr=${OPTARG%,*}
	    val=${OPTARG#*,}
	    ;;
	?)  usage
	    ;;
    esac
done

[ -z "$action" ] && usage
[ $nr -lt 1 -o $nr -gt 2 ] && usage
[ $val -lt 0 -o $val -gt 255 ] && usage

# check hwmon device
dev=$(ls -d /sys/devices/platform/vt1211.*)
if [ -z "$dev" ] ; then
    echo "Platform device vt1211 not found. Did you load the vt1211 module?"
    exit 1
fi

# init file
initfile="/root/.vt1211_pwm${nr}"

# ACTION: display
if [ $action = "display" ] ; then
    for nr in 1 2 ; do
	read mode < ${dev}/pwm${nr}_enable
	if [ $mode -eq 0 ] ; then
	    mode_txt="(disabled)"
	elif [ $mode -eq 2 ] ; then
	    mode_txt="(auto)    "
	else
	    mode_txt="(unknown) "
	fi
	read val < ${dev}/pwm${nr}
	dc=$((val * 100 / 255))
	echo "pwm${nr}: mode = ${mode} ${mode_txt}, val = ${val} (${dc}%)"
    done
fi

# ACTION: init
if [ $action = "init" ] ; then
    # check for an init file
    if [ -e  $initfile ] ; then
	echo " $initfile exists. Did you already initialize this PWM?"
	exit 1
    fi

    (
        # set the pwm-to-temp mapping
        # use the internal temp as a reference
	set_attr ${dev}/pwm${nr}_auto_channels_temp 2

        # enable the pwm auto controller
	set_attr ${dev}/pwm${nr}_enable 2

        # set the PWM duty-cycle
	set_attr ${dev}/pwm${nr}_auto_point2_pwm 0
	set_attr ${dev}/pwm${nr}_auto_point3_pwm 255

        # set the temp boundaries to extrem values
	set_attr ${dev}/pwm1_auto_point1_temp 0
	set_attr ${dev}/pwm1_auto_point2_temp 0
	set_attr ${dev}/pwm1_auto_point3_temp 1000000
	set_attr ${dev}/pwm1_auto_point4_temp 1000000

    ) > $initfile

    exit 0
fi

# ACTION: restore
if [ $action = "restore" ] ; then
    # check for an init file
    if [ ! -e  $initfile ] ; then
	echo " $initfile not found. Nothing to restore."
	exit 1
    fi

    sh $initfile
    rm $initfile

    exit 0
fi

# ACTION: set
if [ $action = "set" ] ; then
    # check for an init file
    if [ ! -e $initfile ] ; then
	echo "$initfile not found. Did you initialize this PWM?"
	exit 1
    fi

    # set the PWM duty-cycle
    echo $val > ${dev}/pwm${nr}_auto_point3_pwm

    # fool the vt1211 into believing there is a temp change
    # otherwise the new PWM duty-cycle doesn't take effect
    echo 0 > ${dev}/pwm1_auto_point3_temp
    echo 1000000 > ${dev}/pwm1_auto_point3_temp

    # read the new PWM duty-cycle back and print it
    read val < ${dev}/pwm${nr}
    dc=$((val * 100 / 255))
    echo "pwm${nr} is now at ${val} (${dc}%)."

    exit 0
fi