Files
lm-sensors/configs/ASRock/A300M-STX-DeskMini.conf
T
Daniel B 39e1bf7249 Add config for ASRock A300M-STX (DeskMini A300)
Patch by dbf <devel@bischof.org>

Applied from
https://github.com/lm-sensors/lm-sensors/pull/252

[v2] fixed fan/intrusion as suggested
[olysonek] Squashed commits, reformatted description.
2020-08-03 10:18:43 +02:00

94 lines
2.1 KiB
Plaintext

# ASRock A300M-STX (as included in DeskMini A300 barebone)
# manufacturing date April 2020 (came with UEFI BIOS 3.60)
# board does have connectors for 2 fans (CPU_FAN1 and CPU_FAN2)
# board does have a connector for intrusion detection
# board does not have a speaker connector
# dmesg: "nct6775: Found NCT6793D or compatible chip at 0x2e:0x290"
chip "nct6793-*"
# board has no speaker connector
set beep_enable 0
# voltages
label in0 "Vcore"
compute in0 @*2, @/2
set in0_min 0.16
set in0_max 1.46
label in2 "AVCC"
set in2_min 3.30 * 0.90
set in2_max 3.30 * 1.10
label in3 "+3.3V"
set in3_min 3.30 * 0.90
set in3_max 3.30 * 1.10
label in7 "3VSB"
set in7_min 3.30 * 0.90
set in7_max 3.30 * 1.10
label in8 "VBAT"
set in8_min 3.00 * 0.90
set in8_max 3.30 * 1.10
label in9 "+12V"
compute in9 @*(53/8), @/(53/8)
set in9_min 12 * 0.90
set in9_max 12 * 1.10
label in13 "+5V"
compute in13 @*(24/8), @/(24/8)
set in13_min 5 * 0.90
set in13_max 5 * 1.10
# these have non-zero input, but are unknown
ignore in1
ignore in4
ignore in5
ignore in6
ignore in10
ignore in11
ignore in12
ignore in14
# temperatures
# not sure about temp2 and temp3
label temp2 "VRM(?) temp"
set temp2_max 75
set temp2_max_hyst 70
label temp3 "MB(?) temp"
set temp3_max 55
set temp3_max_hyst 50
label temp7 "CPU temp"
# other temps are zero or unreasonably high/low
ignore temp1
ignore temp4
ignore temp5
ignore temp6
ignore temp8
ignore temp9
ignore temp10
# fans
label fan2 "CPU_FAN1"
set fan2_min 500
label fan1 "CPU_FAN2"
set fan1_min 500
# these don't have connectors
ignore fan3
ignore fan4
ignore fan5
# intrusion
# the DeskMini A300 has an intrusion detection connector
# on board, but the case has no switch, so you might want to
# ignore these (don't know which one is actually connected)
label intrusion0 "intrusion0"
label intrusion1 "intrusion1"