mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-20 19:41:47 +00:00
93 lines
2.6 KiB
Plaintext
93 lines
2.6 KiB
Plaintext
# Configuration file for Gigabyte GA-MA770-UD3 motherboard
|
|
# GA-MA770-UD3.conf
|
|
|
|
# By Clipo
|
|
# 2/11/2019
|
|
|
|
# Based on config file for GA-MA770-DS3 contributed by Charles A. from India.
|
|
|
|
chip "it8720-*"
|
|
|
|
# Labels are copied from BIOS setup screens when value shown
|
|
|
|
# Voltages
|
|
|
|
label in0 "Vcore"
|
|
# No scaling so no compute
|
|
set in0_min 1.4 * 0.95 # 95% of nominal min
|
|
set in0_max 1.4 * 1.05 # 105% of nominal max
|
|
|
|
label in1 "DDR2 1.8V"
|
|
# No scaling so no compute
|
|
set in1_min 1.8 * 0.95 # 95% of nominal
|
|
set in1_max 1.8 * 1.05 # 105% of nominal
|
|
|
|
label in2 "+3.3V"
|
|
# No scaling so no compute
|
|
set in2_min 3.3 * 0.95 # 95% of nominal
|
|
set in2_max 3.3 * 1.05 # 105% of nominal
|
|
|
|
label in3 "+5V"
|
|
# Assume standard Winbond scaling resistors
|
|
compute in3 @ * ((6.8/10)+1), @ / ((6.8/10)+1)
|
|
set in3_min 5 * 0.95 # 95% of nominal
|
|
set in3_max 5 * 1.05 # 105% of nominal
|
|
|
|
ignore in4 # Value never changed from 3.10
|
|
|
|
ignore in5 # Value fluctuated by to much to be a valid voltage
|
|
|
|
label in6 "+12V"
|
|
# Assume standard Winbond scaling resistors
|
|
compute in6 @ * ((28/10)+1), @ / ((28/10)+1)
|
|
set in6_min 12 * 0.95 # 95% of nominal
|
|
set in6_max 12 * 1.05 # 105% of nominal
|
|
|
|
label in7 "VCCH5V" # dmesg reported In7 set from VCCH5V
|
|
compute in7 @ * ((6.8/10)+1), @ / ((6.8/10)+1)
|
|
set in7_min 5 * 0.95 # 95% of nominal
|
|
set in7_max 5 * 1.05 # 105% of nominal
|
|
|
|
label in8 "Vbat 3V CR2032"
|
|
# Connected directly so no compute
|
|
#in8_min and _max not supported by chip
|
|
|
|
ignore cpu0_vid # Not dynamic under lm-sensors 3.0.0
|
|
|
|
# Temperatures
|
|
|
|
label temp1 "Current System Temperature"
|
|
# BIOS: 32
|
|
compute temp1 @ -5, @ +5 # Correction for what seems to be an in accurate thermal sensor
|
|
set temp1_min 0
|
|
set temp1_max 45 # Tropical ambient max plus a bit
|
|
|
|
label temp2 "Current CPU Casing Temperature"
|
|
# BIOS: 30
|
|
set temp2_min 0
|
|
# Max is lowest available BIOS "CPU Warning Temperature"
|
|
set temp2_max 55
|
|
|
|
ignore temp3
|
|
# Values seen: 77-81, rising from cold start.
|
|
# Fanning the Northbridge did not change value enough to indicate cooling.
|
|
|
|
# ignore intrusion0
|
|
|
|
# Fans
|
|
# The labels chosen are the ones printed on the motherboard
|
|
|
|
label fan1 "CPU_FAN"
|
|
set fan1_min 250 # Low speeds are possible with large fans and cool cases
|
|
|
|
label fan2 "SYS_FAN1"
|
|
set fan2_min 900
|
|
|
|
label fan3 "SYS_FAN2"
|
|
set fan3_min 900
|
|
|
|
ignore fan4 # "NB_FAN" does not send an RPM signal
|
|
|
|
label fan5 "PWR_FAN"
|
|
set fan5_min 900
|