wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-25 12:14:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
0ca078c43aed260ee3cc985a4445343b739b44df
lm-sensors/kernel/chips/lm93.c
T
Mark M. Hoffman 36d420a4a6 bugfix: cut-n-paste mistake in previous fix *sigh* 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2667 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-08-19 19:12:16 +00:00

1797 lines
50 KiB
C
Raw Blame History

/*
lm93.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com>
Copyright (c) 2004 Utilitek Systems, Inc.
derived in part from lm78.c:
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
derived in part from lm85.c:
Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
derived in part from w83l785ts.c:
Copyright (c) 2003-2004 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define DEBUG 1
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/bitops.h>
#include "version.h"
#include "sensors_vid.h"
#ifndef I2C_DRIVERID_LM93
#define I2C_DRIVERID_LM93 1049
#endif
/* I2C addresses to scan */
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { 0x2c, 0x2e, SENSORS_I2C_END };
/* ISA addresses to scan (none) */
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* module parameters */
SENSORS_INSMOD_1(lm93);
static int disable_block /* = 0 */ ;
MODULE_PARM(disable_block, "i");
MODULE_PARM_DESC(disable_block,
"Set to non-zero to disable SMBus block data transactions.");
static int init = 1;
MODULE_PARM(init, "i");
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
static int vccp_limit_type[2] /* = {0,0} */ ;
MODULE_PARM(vccp_limit_type, "2-2i");
MODULE_PARM_DESC(vccp_limit_type, "Configures in7 and in8 limit modes");
/* SMBus capabilities */
#define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA)
#define LM93_SMBUS_FUNC_MIN (I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA)
/* LM93 REGISTER ADDRESSES */
/* miscellaneous */
#define LM93_REG_MFR_ID 0x3e
#define LM93_REG_VER 0x3f
#define LM93_REG_STATUS_CONTROL 0xe2
#define LM93_REG_CONFIG 0xe3
#define LM93_REG_SLEEP_CONTROL 0xe4
/* alarm values start here */
#define LM93_REG_HOST_ERROR_1 0x48
/* voltage inputs: in1-in16 (nr => 0-15) */
#define LM93_REG_IN(nr) (0x56 + (nr))
#define LM93_REG_IN_MIN(nr) (0x90 + (nr) * 2)
#define LM93_REG_IN_MAX(nr) (0x91 + (nr) * 2)
/* temperature inputs: temp1-temp3 (nr => 0-2) */
#define LM93_REG_TEMP(nr) (0x50 + (nr))
#define LM93_REG_TEMP_MIN(nr) (0x78 + (nr) * 2)
#define LM93_REG_TEMP_MAX(nr) (0x79 + (nr) * 2)
/* temp[1-4]_auto_boost (nr => 0-3) */
#define LM93_REG_TEMP_FAN_BOOST(nr) (0x80 + (nr))
/* #PROCHOT inputs: prochot1-prochot2 (nr => 0-1) */
#define LM93_REG_PROCHOT_CUR(nr) (0x67 + (nr) * 2)
#define LM93_REG_PROCHOT_AVG(nr) (0x68 + (nr) * 2)
#define LM93_REG_PROCHOT_MAX(nr) (0xb0 + (nr))
/* fan tach inputs: fan1-fan4 (nr => 0-3) */
#define LM93_REG_FAN(nr) (0x6e + (nr) * 2)
#define LM93_REG_FAN_MIN(nr) (0xb4 + (nr) * 2)
/* pwm outputs: pwm1-pwm2 (nr => 0-1, reg => 0-3) */
#define LM93_REG_PWM_CTL(nr,reg) (0xc8 + (reg) + (nr) * 4)
#define LM93_PWM_CTL1 0
#define LM93_PWM_CTL2 1
#define LM93_PWM_CTL3 2
#define LM93_PWM_CTL4 3
/* GPIO input state */
#define LM93_REG_GPI 0x6b
/* vid inputs: vid1-vid2 (nr => 0-1) */
#define LM93_REG_VID(nr) (0x6c + (nr))
/* vccp1 & vccp2: VID relative inputs (nr => 0-1) */
#define LM93_REG_VCCP_LIMIT_OFF(nr) (0xb2 + (nr))
/* temp[1-4]_auto_boost_hyst */
#define LM93_REG_BOOST_HYST_12 0xc0
#define LM93_REG_BOOST_HYST_34 0xc1
/* temp[1-4]_auto_pwm_[min|hyst] */
#define LM93_REG_MIN_PWM_HYST_12 0xc3
#define LM93_REG_MIN_PWM_HYST_34 0xc4
/* prochot_override & prochot_interval */
#define LM93_REG_PROCHOT_OVERRIDE 0xc6
#define LM93_REG_PROCHOT_INTERVAL 0xc7
/* temp[1-4]_auto_base (nr => 0-3) */
#define LM93_REG_TEMP_BASE(nr) (0xd0 + (nr))
/* temp[1-4]_auto_offsets (step => 0-11) */
#define LM93_REG_TEMP_OFFSET(step) (0xd4 + (step))
/* #PROCHOT & #VRDHOT PWM ramp control */
#define LM93_REG_PWM_RAMP_CTL 0xbf
/* miscellaneous */
#define LM93_REG_SFC1 0xbc
#define LM93_REG_SFC2 0xbd
#define LM93_REG_SF_TACH_TO_PWM 0xe0
/* LM93 REGISTER VALUES */
#define LM93_MFR_ID 0x73
#define LM93_MFR_ID_PROTOTYPE 0x72
/* LM93 BLOCK READ COMMANDS */
static const struct { u8 cmd; u8 len; } lm93_block_read_cmds[12] = {
{ 0xf2, 8 },
{ 0xf3, 8 },
{ 0xf4, 6 },
{ 0xf5, 16 },
{ 0xf6, 4 },
{ 0xf7, 8 },
{ 0xf8, 12 },
{ 0xf9, 32 },
{ 0xfa, 8 },
{ 0xfb, 8 },
{ 0xfc, 16 },
{ 0xfd, 9 },
};
/* CONVERSIONS */
/* fan tach register to/from tach values */
static const u8 lm93_tach_reg_to_value[16] =
{ 0x00, 0x40, 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0,
0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff, 0x00, 0x00 };
/* min, max, and nominal voltage readings, per channel (mV)*/
static const unsigned long lm93_vin_val_min[16] = {
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 3000,
};
static const unsigned long lm93_vin_val_max[16] = {
1236, 1236, 1236, 1600, 2000, 2000, 1600, 1600,
4400, 6667, 3333, 2625, 1312, 1312, 1236, 3600,
};
/*
static const unsigned long lm93_vin_val_nom[16] = {
927, 927, 927, 1200, 1500, 1500, 1200, 1200,
3300, 5000, 2500, 1969, 984, 984, 309, 3300,
};
*/
/* min, max, and nominal register values, per channel (u8) */
static const u8 lm93_vin_reg_min[16] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xae,
};
static const u8 lm93_vin_reg_max[16] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xd1,
};
/*
static const u8 lm93_vin_reg_nom[16] = {
0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0,
0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x40, 0xc0,
};
*/
/* IN: 1/100 V, limits determined by channel nr
REG: scaling determined by channel nr */
static u8 LM93_IN_TO_REG(int nr, unsigned val)
{
/* range limit */
const long mV = SENSORS_LIMIT(val * 10,
lm93_vin_val_min[nr], lm93_vin_val_max[nr]);
/* try not to lose too much precision here */
const long uV = mV * 1000;
const long uV_max = lm93_vin_val_max[nr] * 1000;
const long uV_min = lm93_vin_val_min[nr] * 1000;
/* convert */
const long slope = (uV_max - uV_min) /
(lm93_vin_reg_max[nr] - lm93_vin_reg_min[nr]);
const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
u8 result = ((uV - intercept + (slope/2)) / slope);
result = SENSORS_LIMIT(result,
lm93_vin_reg_min[nr], lm93_vin_reg_max[nr]);
return result;
}
static unsigned LM93_IN_FROM_REG(int nr, u8 reg)
{
const long uV_max = lm93_vin_val_max[nr] * 1000;
const long uV_min = lm93_vin_val_min[nr] * 1000;
const long slope = (uV_max - uV_min) /
(lm93_vin_reg_max[nr] - lm93_vin_reg_min[nr]);
const long intercept = uV_min - slope * lm93_vin_reg_min[nr];
return (slope * reg + intercept + 5000) / 10000;
}
/* vid in mV , upper == 0 indicates low limit, otherwise upper limit
upper also determines which nibble of the register is returned
(the other nibble will be 0x0) */
static u8 LM93_IN_REL_TO_REG(unsigned val, int upper, int vid)
{
long uV_offset = vid * 1000 - val * 10000;
if (upper) {
uV_offset = SENSORS_LIMIT(uV_offset, 12500, 200000);
return (u8)((uV_offset / 12500 - 1) << 4);
} else {
uV_offset = SENSORS_LIMIT(uV_offset, -400000, -25000);
return (u8)((uV_offset / -25000 - 1) << 0);
}
}
/* vid in mV, upper == 0 indicates low limit, otherwise upper limit */
static unsigned LM93_IN_REL_FROM_REG(u8 reg, int upper, int vid)
{
const long uV_offset = upper ? (((reg >> 4 & 0x0f) + 1) * 12500) :
(((reg >> 0 & 0x0f) + 1) * -25000);
const long uV_vid = vid * 1000;
return (uV_vid + uV_offset + 5000) / 10000;
}
#define LM93_TEMP_MIN (-1280)
#define LM93_TEMP_MAX ( 1270)
/* TEMP: 1/10 degrees C (-128C to +127C)
REG: 1C/bit, two's complement */
static u8 LM93_TEMP_TO_REG(int temp)
{
int ntemp = SENSORS_LIMIT(temp, LM93_TEMP_MIN, LM93_TEMP_MAX);
ntemp += (ntemp<0 ? -5 : 5);
return (u8)(ntemp / 10);
}
static int LM93_TEMP_FROM_REG(u8 reg)
{
return (s8)reg * 10;
}
/* RPM: (82.5 to 1350000)
REG: 14-bits, LE, *left* justified */
static u16 LM93_FAN_TO_REG(long rpm)
{
u16 count, regs;
if (rpm == 0) {
count = 0x3fff;
} else {
rpm = SENSORS_LIMIT(rpm, 1, 1000000);
count = SENSORS_LIMIT((1350000 + rpm) / rpm, 1, 0x3ffe);
}
/* <TODO> is this byte-order correct? */
regs = count << 2;
return cpu_to_le16(regs);
}
static int LM93_FAN_FROM_REG(u16 regs)
{
/* <TODO> is this byte-order correct? */
const u16 count = le16_to_cpu(regs) >> 2;
/* <TODO> do we need further divider of 2 here? */
return count==0 ? -1 : count==0x3fff ? 0: 1350000 / count;
}
/* VID: mV
REG: 6-bits, right justified, *always* using Intel VRM/VRD 10 */
static int LM93_VID_FROM_REG(u8 reg)
{
return vid_from_reg((reg & 0x3f), 100);
}
/* PROCHOT: 0-255, 0 => 0%, 255 => > 96.6%
* REG: (same) */
static u8 LM93_PROCHOT_TO_REG(long prochot)
{
prochot = SENSORS_LIMIT(prochot, 0, 255);
return (u8)prochot;
}
/* PROCHOT-OVERRIDE; 0-15, 0 is 6.25%, 15 is 99.88%
* REG: (same) */
static u8 LM93_PROCHOT_OVERRIDE_TO_REG(int force1, int force2, long prochot)
{
u8 result = 0;
result |= force1 ? 0x80 : 0x00;
result |= force2 ? 0x40 : 0x00;
prochot = SENSORS_LIMIT(prochot, 0, 15);
result |= prochot;
return result;
}
/* PROCHOT-INTERVAL: 73 - 37200 (1/100 seconds)
* REG: 0-9 as mapped below */
static int lm93_interval_map[10] = {
73, 146, 290, 580, 1170, 2330, 4660, 9320, 18600, 37200,
};
static int LM93_INTERVAL_FROM_REG(u8 reg)
{
return lm93_interval_map[reg & 0x0f];
}
/* round up to nearest match */
static u8 LM93_INTERVAL_TO_REG(long interval)
{
int i;
for (i = 0; i < 9; i++)
if (interval <= lm93_interval_map[i])
break;
/* can fall through with i==9 */
return (u8)i;
}
/* PWM: 0-255 per sensors documentation
REG: 0-13 as mapped below... *left* justified */
typedef enum { LM93_PWM_MAP_HI_FREQ, LM93_PWM_MAP_LO_FREQ } pwm_freq_t;
static int lm93_pwm_map[2][14] = {
{
0x00, /* 0.00% */ 0x40, /* 25.00% */
0x50, /* 31.25% */ 0x60, /* 37.50% */
0x70, /* 43.75% */ 0x80, /* 50.00% */
0x90, /* 56.25% */ 0xa0, /* 62.50% */
0xb0, /* 68.75% */ 0xc0, /* 75.00% */
0xd0, /* 81.25% */ 0xe0, /* 87.50% */
0xf0, /* 93.75% */ 0xff, /* 100.00% */
},
{
0x00, /* 0.00% */ 0x40, /* 25.00% */
0x49, /* 28.57% */ 0x52, /* 32.14% */
0x5b, /* 35.71% */ 0x64, /* 39.29% */
0x6d, /* 42.86% */ 0x76, /* 46.43% */
0x80, /* 50.00% */ 0x89, /* 53.57% */
0x92, /* 57.14% */ 0xb6, /* 71.43% */
0xdb, /* 85.71% */ 0xff, /* 100.00% */
},
};
static int LM93_PWM_FROM_REG(u8 reg, pwm_freq_t freq)
{
return lm93_pwm_map[freq][reg >> 4 & 0x0f];
}
/* round up to nearest match */
static u8 LM93_PWM_TO_REG(int pwm, pwm_freq_t freq)
{
int i;
for (i = 0; i < 13; i++)
if (pwm <= lm93_pwm_map[freq][i])
break;
/* can fall through with i==13 */
return (u8)(i << 4);
}
/* PWM FREQ: HZ
REG: 0-7 as mapped below */
static int lm93_pwm_freq_map[8] = {
22500, 96, 84, 72, 60, 48, 36, 12
};
static int LM93_PWM_FREQ_FROM_REG(u8 reg)
{
return lm93_pwm_freq_map[reg & 0x07];
}
/* round up to nearest match */
static u8 LM93_PWM_FREQ_TO_REG(int freq)
{
int i;
for (i = 7; i > 0; i--)
if (freq <= lm93_pwm_freq_map[i])
break;
/* can fall through with i==0 */
return (u8)i;
}
/* GPIO: 0-255, GPIO0 is LSB
* REG: inverted */
static unsigned LM93_GPI_FROM_REG(u8 reg)
{
return ~reg & 0xff;
}
/* ALARMS: SYSCTL format described further below
REG: 64 bits in 8 registers, as immediately below */
struct block1_t {
u8 host_status_1;
u8 host_status_2;
u8 host_status_3;
u8 host_status_4;
u8 p1_prochot_status;
u8 p2_prochot_status;
u8 gpi_status;
u8 fan_status;
};
static unsigned LM93_ALARMS_FROM_REG(struct block1_t b1)
{
unsigned result;
result = b1.host_status_2;
result |= b1.host_status_3 << 8;
result |= (b1.fan_status & 0x04) << 16;
result |= (b1.p1_prochot_status & 0x80) << 13;
result |= (b1.p2_prochot_status & 0x80) << 14;
result |= (b1.host_status_4 & 0xfc) << 20;
result |= (b1.host_status_1 & 0x07) << 28;
return result;
}
/* For each registered client, we need to keep some data in memory. That
data is pointed to by client->data. The structure itself is dynamically
allocated, at the same time the client itself is allocated. */
struct lm93_data {
struct i2c_client client;
struct semaphore lock;
int sysctl_id;
enum chips type;
struct semaphore update_lock;
unsigned long last_updated; /* In jiffies */
/* client update function */
void (*update)(struct lm93_data *, struct i2c_client *);
char valid; /* !=0 if following fields are valid */
/* register values, arranged by block read groups */
struct block1_t block1;
/* temp1 - temp4: unfiltered readings
temp1 - temp2: filtered readings */
u8 block2[6];
/* vin1 - vin16: readings */
u8 block3[16];
/* prochot1 - prochot2: readings */
struct { u8 cur; u8 avg; } block4[2];
/* fan counts 1-4 => 14-bits, LE, *left* justified */
u16 block5[4];
/* block6 has a lot of data we don't need */
struct { u8 min; u8 max; } temp_lim[3];
/* vin1 - vin16: low and high limits */
struct { u8 min; u8 max; } block7[16];
/* fan count limits 1-4 => same format as block5 */
u16 block8[4];
/* pwm control registers (2 pwms, 4 regs) */
u8 block9[2][4];
/* master config register */
u8 config;
/* VID1 & VID2 => register format, 6-bits, right justified */
u8 vid[2];
/* prochot1 - prochot2: limits */
u8 prochot_max[2];
/* vccp1 & vccp2 (in7 & in8): VID relative limits (register format) */
u8 vccp_limits[2];
/* GPIO input state (register format, i.e. inverted) */
u8 gpi;
/* #PROCHOT override (register format) */
u8 prochot_override;
/* #PROCHOT intervals (register format) */
u8 prochot_interval;
/* miscellaneous setup regs */
u8 sfc1;
u8 sfc2;
u8 sf_tach_to_pwm;
/* The two PWM CTL2 registers can read something other than what was
last written for the OVR_DC field (duty cycle override). So, we
save the user-commanded value here. */
u8 pwm_override[2];
};
static int lm93_attach_adapter(struct i2c_adapter *adapter);
static int lm93_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int lm93_detach_client(struct i2c_client *client);
static u8 lm93_read_byte(struct i2c_client *client, u8 register);
static int lm93_write_byte(struct i2c_client *client, u8 register, u8 value);
static u16 lm93_read_word(struct i2c_client *client, u8 register);
static int lm93_write_word(struct i2c_client *client, u8 register, u16 value);
static void lm93_update_client(struct i2c_client *client);
static void lm93_update_client_full(struct lm93_data *data,
struct i2c_client *client);
static void lm93_update_client_min (struct lm93_data *data,
struct i2c_client *client);
static void lm93_init_client(struct i2c_client *client);
static void lm93_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void lm93_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_fan(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_pwm(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_pwm_freq(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_fan_smart_tach(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_vid(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_prochot(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_prochot_short(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_prochot_override(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_prochot_interval(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_vrdhot(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_gpio(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void lm93_alarms(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static struct i2c_driver lm93_driver = {
.owner = THIS_MODULE,
.name = "LM93 sensor driver",
.id = I2C_DRIVERID_LM93,
.flags = I2C_DF_NOTIFY,
.attach_adapter = lm93_attach_adapter,
.detach_client = lm93_detach_client,
};
/* unique ID for each LM93 detected */
static int lm93_id = 0;
/* -- SENSORS SYSCTL START -- */
/* volts * 100 */
#define LM93_SYSCTL_IN1 1001
#define LM93_SYSCTL_IN2 1002
#define LM93_SYSCTL_IN3 1003
#define LM93_SYSCTL_IN4 1004
#define LM93_SYSCTL_IN5 1005
#define LM93_SYSCTL_IN6 1006
#define LM93_SYSCTL_IN7 1007
#define LM93_SYSCTL_IN8 1008
#define LM93_SYSCTL_IN9 1009
#define LM93_SYSCTL_IN10 1010
#define LM93_SYSCTL_IN11 1011
#define LM93_SYSCTL_IN12 1012
#define LM93_SYSCTL_IN13 1013
#define LM93_SYSCTL_IN14 1014
#define LM93_SYSCTL_IN15 1015
#define LM93_SYSCTL_IN16 1016
/* degrees celcius * 10 */
#define LM93_SYSCTL_TEMP1 1101
#define LM93_SYSCTL_TEMP2 1102
#define LM93_SYSCTL_TEMP3 1103
/* rotations/minute */
#define LM93_SYSCTL_FAN1 1201
#define LM93_SYSCTL_FAN2 1202
#define LM93_SYSCTL_FAN3 1203
#define LM93_SYSCTL_FAN4 1204
/* 1-2 => enable smart tach mode associated with this pwm #, or disable */
#define LM93_SYSCTL_FAN1_SMART_TACH 1205
#define LM93_SYSCTL_FAN2_SMART_TACH 1205
#define LM93_SYSCTL_FAN3_SMART_TACH 1207
#define LM93_SYSCTL_FAN4_SMART_TACH 1208
/* volts * 1000 */
#define LM93_SYSCTL_VID1 1301
#define LM93_SYSCTL_VID2 1302
/* 0 => off, 255 => 100% */
#define LM93_SYSCTL_PWM1 1401
#define LM93_SYSCTL_PWM2 1402
/* Hz */
#define LM93_SYSCTL_PWM1_FREQ 1403
#define LM93_SYSCTL_PWM2_FREQ 1404
/* 0 => 0%, 255 => > 99.6% */
#define LM93_SYSCTL_PROCHOT1 1501
#define LM93_SYSCTL_PROCHOT2 1502
/* !0 => enable #PROCHOT logical short */
#define LM93_SYSCTL_PROCHOT_SHORT 1503
/* 2 boolean enable/disable, 3rd value indicates duty cycle */
#define LM93_SYSCTL_PROCHOT_OVERRIDE 1504
/* 2 values, 0-9 */
#define LM93_SYSCTL_PROCHOT_INTERVAL 1505
/* GPIO input (bitmask) */
#define LM93_SYSCTL_GPIO 1601
/* #VRDHOT input (boolean) */
#define LM93_SYSCTL_VRDHOT1 1701
#define LM93_SYSCTL_VRDHOT2 1702
/* alarms (bitmask) */
#define LM93_SYSCTL_ALARMS 2001 /* bitvector */
/* alarm bitmask definitions
The LM93 has nearly 64 bits of error status... I've pared that down to
what I think is a useful subset in order to fit it into 32 bits.
Especially note that the #VRD_HOT alarms are missing because we provide
that information as values in another /proc file.
If libsensors is extended to support 64 bit values, this could be revisited.
*/
#define LM93_ALARM_IN1 0x00000001
#define LM93_ALARM_IN2 0x00000002
#define LM93_ALARM_IN3 0x00000004
#define LM93_ALARM_IN4 0x00000008
#define LM93_ALARM_IN5 0x00000010
#define LM93_ALARM_IN6 0x00000020
#define LM93_ALARM_IN7 0x00000040
#define LM93_ALARM_IN8 0x00000080
#define LM93_ALARM_IN9 0x00000100
#define LM93_ALARM_IN10 0x00000200
#define LM93_ALARM_IN11 0x00000400
#define LM93_ALARM_IN12 0x00000800
#define LM93_ALARM_IN13 0x00001000
#define LM93_ALARM_IN14 0x00002000
#define LM93_ALARM_IN15 0x00004000
#define LM93_ALARM_IN16 0x00008000
#define LM93_ALARM_FAN1 0x00010000
#define LM93_ALARM_FAN2 0x00020000
#define LM93_ALARM_FAN3 0x00040000
#define LM93_ALARM_FAN4 0x00080000
#define LM93_ALARM_PH1_ERR 0x00100000
#define LM93_ALARM_PH2_ERR 0x00200000
#define LM93_ALARM_SCSI1_ERR 0x00400000
#define LM93_ALARM_SCSI2_ERR 0x00800000
#define LM93_ALARM_DVDDP1_ERR 0x01000000
#define LM93_ALARM_DVDDP2_ERR 0x02000000
#define LM93_ALARM_D1_ERR 0x04000000
#define LM93_ALARM_D2_ERR 0x08000000
#define LM93_ALARM_TEMP1 0x10000000
#define LM93_ALARM_TEMP2 0x20000000
#define LM93_ALARM_TEMP3 0x40000000
/* -- SENSORS SYSCTL END -- */
/* These files are created for each detected LM93. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
#define LM93_SYSCTL_IN(nr) {LM93_SYSCTL_IN##nr, "in" #nr, NULL, 0, \
0644, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_in}
#define LM93_SYSCTL_TEMP(nr) {LM93_SYSCTL_TEMP##nr, "temp" #nr, NULL, 0, \
0644, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_temp}
#define LM93_SYSCTL_PWM(nr) {LM93_SYSCTL_PWM##nr, "pwm" #nr, NULL, 0, \
0644, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_pwm}
#define LM93_SYSCTL_PWM_FREQ(nr) {LM93_SYSCTL_PWM##nr##_FREQ, \
"pwm" #nr "_freq", NULL, 0, 0644, NULL, &i2c_proc_real, \
&i2c_sysctl_real, NULL, &lm93_pwm_freq}
#define LM93_SYSCTL_FAN(nr) {LM93_SYSCTL_FAN##nr, "fan" #nr, NULL, 0, \
0644, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_fan}
#define LM93_SYSCTL_VID(nr) {LM93_SYSCTL_VID##nr, "vid" #nr, NULL, 0, \
0444, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_vid}
#define LM93_SYSCTL_PROCHOT(nr) {LM93_SYSCTL_PROCHOT##nr, "prochot" #nr, NULL, \
0, 0644, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_prochot}
#define LM93_SYSCTL_VRDHOT(nr) {LM93_SYSCTL_VRDHOT##nr, "vrdhot" #nr, NULL, \
0, 0444, NULL, &i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_vrdhot}
#define LM93_SYSCTL_FAN_SMART_TACH(nr) {LM93_SYSCTL_FAN##nr##_SMART_TACH, \
"fan" #nr "_smart_tach", NULL, 0, 0644, NULL, &i2c_proc_real, \
&i2c_sysctl_real, NULL, &lm93_fan_smart_tach}
static ctl_table lm93_dir_table_template[] = {
LM93_SYSCTL_IN(1),
LM93_SYSCTL_IN(2),
LM93_SYSCTL_IN(3),
LM93_SYSCTL_IN(4),
LM93_SYSCTL_IN(5),
LM93_SYSCTL_IN(6),
LM93_SYSCTL_IN(7),
LM93_SYSCTL_IN(8),
LM93_SYSCTL_IN(9),
LM93_SYSCTL_IN(10),
LM93_SYSCTL_IN(11),
LM93_SYSCTL_IN(12),
LM93_SYSCTL_IN(13),
LM93_SYSCTL_IN(14),
LM93_SYSCTL_IN(15),
LM93_SYSCTL_IN(16),
LM93_SYSCTL_TEMP(1),
LM93_SYSCTL_TEMP(2),
LM93_SYSCTL_TEMP(3),
LM93_SYSCTL_FAN(1),
LM93_SYSCTL_FAN(2),
LM93_SYSCTL_FAN(3),
LM93_SYSCTL_FAN(4),
LM93_SYSCTL_FAN_SMART_TACH(1),
LM93_SYSCTL_FAN_SMART_TACH(2),
LM93_SYSCTL_FAN_SMART_TACH(3),
LM93_SYSCTL_FAN_SMART_TACH(4),
LM93_SYSCTL_PWM(1),
LM93_SYSCTL_PWM(2),
LM93_SYSCTL_PWM_FREQ(1),
LM93_SYSCTL_PWM_FREQ(2),
LM93_SYSCTL_VID(1),
LM93_SYSCTL_VID(2),
LM93_SYSCTL_PROCHOT(1),
LM93_SYSCTL_PROCHOT(2),
{LM93_SYSCTL_PROCHOT_SHORT, "prochot_short", NULL, 0, 0644, NULL,
&i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_prochot_short},
{LM93_SYSCTL_PROCHOT_OVERRIDE, "prochot_override", NULL, 0, 0644, NULL,
&i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_prochot_override},
{LM93_SYSCTL_PROCHOT_INTERVAL, "prochot_interval", NULL, 0, 0644, NULL,
&i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_prochot_interval},
LM93_SYSCTL_VRDHOT(1),
LM93_SYSCTL_VRDHOT(2),
{LM93_SYSCTL_GPIO, "gpio", NULL, 0, 0444, NULL,
&i2c_proc_real, &i2c_sysctl_real, NULL, &lm93_gpio},
{LM93_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &lm93_alarms},
{0}
};
/* This function is called when:
* lm93_driver is inserted (when this module is loaded), for each
available adapter
* when a new adapter is inserted (and lm93_driver is still present) */
static int lm93_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, lm93_detect);
}
/* This function is called by i2c_detect */
int lm93_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int err, func;
struct lm93_data *data;
struct i2c_client *client;
void (*update)(struct lm93_data *, struct i2c_client *);
/* lm93 is SMBus only */
if (i2c_is_isa_adapter(adapter)) {
pr_debug("lm93.o: detect failed, "
"cannot attach to legacy adapter!\n");
err = -ENODEV;
goto ERROR0;
}
/* choose update routine based on bus capabilities */
func = i2c_get_functionality(adapter);
if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
(!disable_block) ) {
pr_debug("lm93.o: using SMBus block data transactions\n");
update = lm93_update_client_full;
} else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
pr_debug("lm93.o: disabled SMBus block data transactions\n");
update = lm93_update_client_min;
} else {
pr_debug("lm93.o: detect failed, "
"smbus byte and/or word data not supported!\n");
err = -ENODEV;
goto ERROR0;
}
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm78_{read,write}_value. */
if (!(data = kmalloc(sizeof(struct lm93_data), GFP_KERNEL))) {
pr_debug("lm93.o: detect failed, kmalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
client = &data->client;
client->addr = address;
init_MUTEX(&data->lock);
client->data = data;
client->adapter = adapter;
client->driver = &lm93_driver;
client->flags = 0;
/* detection */
if (kind < 0) {
int mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
if (mfr != 0x01) {
pr_debug("lm93.o: detect failed, "
"bad manufacturer id 0x%02x!\n", mfr);
err = -ENODEV;
goto ERROR1;
}
}
if (kind <= 0) {
int ver = lm93_read_byte(client, LM93_REG_VER);
if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) {
kind = lm93;
} else {
pr_debug("lm93.o: detect failed, "
"bad version id 0x%02x!\n", ver);
if (kind == 0)
pr_debug("lm93.o: "
"(ignored 'force' parameter)\n");
err = -ENODEV;
goto ERROR1;
}
}
/* fill in remaining client fields */
strcpy(client->name, "LM93 chip");
client->id = lm93_id++;
pr_debug("lm93.o: assigning ID %d to %s at %d,0x%02x\n", client->id,
client->name, i2c_adapter_id(client->adapter), client->addr);
/* housekeeping */
data->type = kind;
data->valid = 0;
data->update = update;
init_MUTEX(&data->update_lock);
/* tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(client)))
goto ERROR1;
/* initialize the chip */
lm93_init_client(client);
/* register a new directory entry with module sensors */
if ((data->sysctl_id = i2c_register_entry(client, "lm93",
lm93_dir_table_template)) < 0) {
err = data->sysctl_id;
goto ERROR2;
}
return 0;
ERROR2:
i2c_detach_client(client);
ERROR1:
kfree(data);
ERROR0:
return err;
}
static int lm93_detach_client(struct i2c_client *client)
{
int err;
struct lm93_data *data = client->data;
i2c_deregister_entry(data->sysctl_id);
if ((err = i2c_detach_client(client))) {
printk (KERN_ERR "lm93.o: Client deregistration failed; "
"client not detached.\n");
return err;
}
return 0;
}
#define MAX_RETRIES 5
static u8 lm93_read_byte(struct i2c_client *client, u8 reg)
{
int value, i;
/* retry in case of read errors */
for (i=1; i<=MAX_RETRIES; i++) {
if ((value = i2c_smbus_read_byte_data(client, reg)) >= 0) {
return value;
} else {
printk(KERN_WARNING "lm93.o: read byte data failed, "
"address 0x%02x.\n", reg);
mdelay(i);
}
}
/* <TODO> what to return in case of error? */
return 0;
}
static int lm93_write_byte(struct i2c_client *client, u8 reg, u8 value)
{
int result;
/* <TODO> how to handle write errors? */
result = i2c_smbus_write_byte_data(client, reg, value);
if (result < 0)
printk(KERN_WARNING "lm93.o: write byte data failed, "
"0x%02x at address 0x%02x.\n", value, reg);
return result;
}
static u16 lm93_read_word(struct i2c_client *client, u8 reg)
{
int value, i;
/* retry in case of read errors */
for (i=1; i<=MAX_RETRIES; i++) {
if ((value = i2c_smbus_read_word_data(client, reg)) >= 0) {
return value;
} else {
printk(KERN_WARNING "lm93.o: read word data failed, "
"address 0x%02x.\n", reg);
mdelay(i);
}
}
/* <TODO> what to return in case of error? */
return 0;
}
static int lm93_write_word(struct i2c_client *client, u8 reg, u16 value)
{
int result;
/* <TODO> how to handle write errors? */
result = i2c_smbus_write_word_data(client, reg, value);
if (result < 0)
printk(KERN_WARNING "lm93.o: write word data failed, "
"0x%04x at address 0x%02x.\n", value, reg);
return result;
}
static u8 lm93_block_buffer[I2C_SMBUS_BLOCK_MAX];
/*
read block data into values, retry if not expected length
fbn => index to lm93_block_read_cmds table
(Fixed Block Number - section 14.5.2 of LM93 datasheet)
*/
static void lm93_read_block(struct i2c_client *client, u8 fbn, u8 *values)
{
int i, result;
for (i = 1; i <= MAX_RETRIES; i++) {
result = i2c_smbus_read_block_data(client,
lm93_block_read_cmds[fbn].cmd, lm93_block_buffer);
if (result != lm93_block_read_cmds[fbn].len) {
printk(KERN_WARNING "lm93.o: block read data failed, "
"command 0x%02x.\n",
lm93_block_read_cmds[fbn].cmd);
mdelay(1);
}
}
if (result == lm93_block_read_cmds[fbn].len) {
memcpy(values,lm93_block_buffer,lm93_block_read_cmds[fbn].len);
} else {
/* <TODO> what to do in case of error? */
}
}
static void lm93_init_client(struct i2c_client *client)
{
int i;
u8 reg = lm93_read_byte(client, LM93_REG_CONFIG);
/* start monitoring */
lm93_write_byte(client, LM93_REG_CONFIG, reg | 0x01);
if (init) {
/* enable #ALERT pin */
reg = lm93_read_byte(client, LM93_REG_CONFIG);
lm93_write_byte(client, LM93_REG_CONFIG, reg | 0x08);
/* enable ASF mode for BMC status registers */
reg = lm93_read_byte(client, LM93_REG_STATUS_CONTROL);
lm93_write_byte(client, LM93_REG_STATUS_CONTROL, reg | 0x02);
/* set sleep state to S0 */
lm93_write_byte(client, LM93_REG_SLEEP_CONTROL, 0);
}
/* spin until ready */
for (i=0; i<20; i++) {
mdelay(10);
if ((lm93_read_byte(client, LM93_REG_CONFIG) & 0x80) == 0x80)
return;
}
printk(KERN_WARNING "lm93.o: timed out waiting for sensor "
"chip to signal ready!\n");
}
static void lm93_update_client(struct i2c_client *client)
{
struct lm93_data *data = client->data;
down(&data->update_lock);
if (time_after(jiffies - data->last_updated, HZ + HZ / 2) ||
time_before(jiffies, data->last_updated) || !data->valid) {
data->update(data, client);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* update routine for data that has no corresponding SMBus block data command */
static void lm93_update_client_common(struct lm93_data *data,
struct i2c_client *client)
{
int i;
/* temp1 - temp3: limits */
for (i = 0; i < 3; i++) {
data->temp_lim[i].min =
lm93_read_byte(client, LM93_REG_TEMP_MIN(i));
data->temp_lim[i].max =
lm93_read_byte(client, LM93_REG_TEMP_MAX(i));
}
/* config register */
data->config = lm93_read_byte(client, LM93_REG_CONFIG);
/* vid1 - vid2: values */
for (i = 0; i < 2; i++)
data->vid[i] = lm93_read_byte(client, LM93_REG_VID(i));
/* prochot1 - prochot2: limits */
for (i = 0; i < 2; i++)
data->prochot_max[i] = lm93_read_byte(client,
LM93_REG_PROCHOT_MAX(i));
/* vccp1 - vccp2: VID relative limits */
for (i = 0; i < 2; i++)
data->vccp_limits[i] = lm93_read_byte(client,
LM93_REG_VCCP_LIMIT_OFF(i));
/* GPIO input state */
data->gpi = lm93_read_byte(client, LM93_REG_GPI);
/* #PROCHOT override state */
data->prochot_override = lm93_read_byte(client,
LM93_REG_PROCHOT_OVERRIDE);
/* #PROCHOT intervals */
data->prochot_interval = lm93_read_byte(client,
LM93_REG_PROCHOT_INTERVAL);
/* misc setup registers */
data->sfc1 = lm93_read_byte(client, LM93_REG_SFC1);
data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
data->sf_tach_to_pwm = lm93_read_byte(client,
LM93_REG_SF_TACH_TO_PWM);
}
/* update routine which uses SMBus block data commands */
static void lm93_update_client_full(struct lm93_data *data,
struct i2c_client *client)
{
pr_debug("lm93.o: starting device update (block data enabled)\n");
/* in1 - in16: values & limits */
lm93_read_block(client, 3, (u8 *)(data->block3));
lm93_read_block(client, 7, (u8 *)(data->block7));
/* temp1 - temp3: values */
lm93_read_block(client, 2, (u8 *)(data->block2));
/* prochot1 - prochot2: values */
lm93_read_block(client, 4, (u8 *)(data->block4));
/* fan1 - fan4: values & limits */
lm93_read_block(client, 5, (u8 *)(data->block5));
lm93_read_block(client, 8, (u8 *)(data->block8));
/* pmw control registers */
lm93_read_block(client, 9, (u8 *)(data->block9));
/* alarm values */
lm93_read_block(client, 1, (u8 *)(&data->block1));
lm93_update_client_common(data, client);
}
/* update routine which uses SMBus byte/word data commands only */
static void lm93_update_client_min(struct lm93_data *data,
struct i2c_client *client)
{
int i,j;
u8 *ptr;
pr_debug("lm93.o: starting device update (block data disabled)\n");
/* in1 - in16: values & limits */
for (i = 0; i < 16; i++) {
data->block3[i] =
lm93_read_byte(client, LM93_REG_IN(i));
data->block7[i].min =
lm93_read_byte(client, LM93_REG_IN_MIN(i));
data->block7[i].max =
lm93_read_byte(client, LM93_REG_IN_MAX(i));
}
/* temp1 - temp3: values */
for (i = 0; i < 4; i++) {
data->block2[i] =
lm93_read_byte(client, LM93_REG_TEMP(i));
}
/* prochot1 - prochot2: values */
for (i = 0; i < 2; i++) {
data->block4[i].cur =
lm93_read_byte(client, LM93_REG_PROCHOT_CUR(i));
data->block4[i].avg =
lm93_read_byte(client, LM93_REG_PROCHOT_AVG(i));
}
/* fan1 - fan4: values & limits */
for (i = 0; i < 4; i++) {
data->block5[i] =
lm93_read_word(client, LM93_REG_FAN(i));
data->block8[i] =
lm93_read_word(client, LM93_REG_FAN_MIN(i));
}
/* pwm control registers */
for (i = 0; i < 2; i++) {
for (j = 0; j < 4; j++) {
data->block9[i][j] =
lm93_read_word(client, LM93_REG_PWM_CTL(i,j));
}
}
/* alarm values */
ptr = &data->block1;
for (i = 0, ptr = &data->block1; i < 8; i++) {
*(ptr + i) =
lm93_read_byte(client, LM93_REG_HOST_ERROR_1 + i);
}
lm93_update_client_common(data, client);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
static void lm93_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_IN1; /* 0 <= nr <= 15 */
int vccp = ctl_name - LM93_SYSCTL_IN7; /* 0 <= vccp <= 1 if relevant */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
/* for limits, check in7 and in8 for VID relative mode */
if ((ctl_name==LM93_SYSCTL_IN7 || ctl_name==LM93_SYSCTL_IN8) &&
(vccp_limit_type[vccp])) {
long vid = LM93_VID_FROM_REG(data->vid[vccp]);
results[0] = LM93_IN_REL_FROM_REG(
data->vccp_limits[vccp], 0, vid);
results[1] = LM93_IN_REL_FROM_REG(
data->vccp_limits[vccp], 1, vid);
/* otherwise, use absolute limits */
} else {
results[0] = LM93_IN_FROM_REG(nr,
data->block7[nr].min);
results[1] = LM93_IN_FROM_REG(nr,
data->block7[nr].max);
}
results[2] = LM93_IN_FROM_REG(nr, data->block3[nr]);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
down(&data->update_lock);
/* for limits, check in7 and in8 for VID relative mode */
if ((ctl_name==LM93_SYSCTL_IN7 || ctl_name==LM93_SYSCTL_IN8) &&
(vccp_limit_type[vccp])) {
long vid = LM93_VID_FROM_REG(data->vid[vccp]);
if (*nrels_mag >= 2) {
data->vccp_limits[vccp] =
(data->vccp_limits[vccp] & 0x0f) |
LM93_IN_REL_TO_REG(results[1], 1, vid);
}
if (*nrels_mag >= 1) {
data->vccp_limits[vccp] =
(data->vccp_limits[vccp] & 0xf0) |
LM93_IN_REL_TO_REG(results[0], 0, vid);
lm93_write_byte(client,
LM93_REG_VCCP_LIMIT_OFF(vccp),
data->vccp_limits[vccp]);
}
/* otherwise, use absolute limits */
} else {
if (*nrels_mag >= 1) {
data->block7[nr].min = LM93_IN_TO_REG(nr,
results[0]);
lm93_write_byte(client, LM93_REG_IN_MIN(nr),
data->block7[nr].min);
}
if (*nrels_mag >= 2) {
data->block7[nr].max = LM93_IN_TO_REG(nr,
results[1]);
lm93_write_byte(client, LM93_REG_IN_MAX(nr),
data->block7[nr].max);
}
}
up(&data->update_lock);
}
}
void lm93_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_TEMP1;
if (0 > nr || nr > 2)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 1;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = LM93_TEMP_FROM_REG(data->temp_lim[nr].max);
results[1] = LM93_TEMP_FROM_REG(data->temp_lim[nr].min);
results[2] = LM93_TEMP_FROM_REG(data->block2[nr]);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
down(&data->update_lock);
if (*nrels_mag >= 1) {
data->temp_lim[nr].max = LM93_TEMP_TO_REG(results[0]);
lm93_write_byte(client, LM93_REG_TEMP_MAX(nr),
data->temp_lim[nr].max);
}
if (*nrels_mag >= 2) {
data->temp_lim[nr].min = LM93_TEMP_TO_REG(results[1]);
lm93_write_byte(client, LM93_REG_TEMP_MIN(nr),
data->temp_lim[nr].min);
}
up(&data->update_lock);
}
}
void lm93_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_FAN1;
if (0 > nr || nr > 3)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = LM93_FAN_FROM_REG(data->block8[nr]); /* min */
results[1] = LM93_FAN_FROM_REG(data->block5[nr]); /* val */
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
down(&data->update_lock);
data->block8[nr] = LM93_FAN_TO_REG(results[0]);
lm93_write_word(client, LM93_REG_FAN_MIN(nr),
data->block8[nr]);
up(&data->update_lock);
}
}
}
void lm93_vid(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_VID1;
if (0 > nr || nr > 1)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = LM93_VID_FROM_REG(data->vid[nr]);
*nrels_mag = 1;
}
}
/* some tedious bit-twiddling here to deal with the register format:
data->sf_tach_to_pwm: (tach to pwm mapping bits)
bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
T4:P2 T4:P1 T3:P2 T3:P1 T2:P2 T2:P1 T1:P2 T1:P1
data->sfc2: (enable bits)
bit | 3 | 2 | 1 | 0
T4 T3 T2 T1
*/
/* helper function - must grab data->update_lock before calling
fan is 0-3, indicating fan1-fan4 */
static void lm93_write_fan_smart_tach(struct i2c_client *client,
struct lm93_data *data, int fan, long value)
{
/* insert the new mapping and write it out */
data->sf_tach_to_pwm = lm93_read_byte(client, LM93_REG_SF_TACH_TO_PWM);
data->sf_tach_to_pwm &= ~0x3 << fan * 2;
data->sf_tach_to_pwm |= value << fan * 2;
lm93_write_byte(client, LM93_REG_SF_TACH_TO_PWM, data->sf_tach_to_pwm);
/* insert the enable bit and write it out */
data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
if (value)
data->sfc2 |= 1 << fan;
else
data->sfc2 &= ~1 << fan;
lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
}
/* helper function - must grab data->update_lock before calling
pwm is 0-1, indicating pwm1-pwm2
this disables smart tach for all tach channels bound to the given pwm */
static void lm93_disable_fan_smart_tach(struct i2c_client *client,
struct lm93_data *data, int pwm)
{
int mapping = lm93_read_byte(client, LM93_REG_SF_TACH_TO_PWM);
int mask;
/* collapse the mapping into a mask of enable bits */
mapping = (mapping >> pwm) & 0x55;
mask = mapping & 0x01;
mask |= (mapping & 0x04) >> 1;
mask |= (mapping & 0x10) >> 2;
mask |= (mapping & 0x40) >> 3;
/* disable smart tach according to the mask */
data->sfc2 = lm93_read_byte(client, LM93_REG_SFC2);
data->sfc2 &= ~mask;
lm93_write_byte(client, LM93_REG_SFC2, data->sfc2);
}
void lm93_fan_smart_tach(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_FAN1_SMART_TACH;
if (0 > nr || nr > 3)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
/* extract the relevant mapping */
int mapping = (data->sf_tach_to_pwm >> (nr * 2)) & 0x03;
/* if there's a mapping and it's enabled */
if (mapping && ((data->sfc2 >> nr) & 0x01))
results[0] = mapping;
else
results[0] = 0;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
down(&data->update_lock);
/* sanity test, ignore the write otherwise */
if (0 <= results[0] && results[0] <= 2) {
/* can't enable if pwm freq is 22.5KHz */
if (results[0]) {
u8 ctl4 = lm93_read_byte(client,
LM93_REG_PWM_CTL(results[0]-1,
LM93_PWM_CTL4));
if ((ctl4 & 0x07) == 0)
results[0] = 0;
}
lm93_write_fan_smart_tach(client, data, nr,
results[0]);
}
up(&data->update_lock);
}
}
}
void lm93_prochot(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_PROCHOT1;
if (0 > nr || nr > 1)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = data->prochot_max[nr];
results[1] = data->block4[nr].avg;
results[2] = data->block4[nr].avg;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
down(&data->update_lock);
if (*nrels_mag >= 1) {
data->prochot_max[nr] = LM93_PROCHOT_TO_REG(results[0]);
lm93_write_byte(client, LM93_REG_PROCHOT_MAX(nr),
data->prochot_max[nr]);
}
up(&data->update_lock);
}
}
void lm93_prochot_short(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
if (ctl_name != LM93_SYSCTL_PROCHOT_SHORT)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = (data->config & 0x10) ? 1 : 0;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
down(&data->update_lock);
if (*nrels_mag >= 1) {
if (results[0])
data->config |= 0x10;
else
data->config &= ~0x10;
lm93_write_byte(client, LM93_REG_CONFIG, data->config);
}
up(&data->update_lock);
}
}
void lm93_prochot_override(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
if (ctl_name != LM93_SYSCTL_PROCHOT_OVERRIDE)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = (data->prochot_override & 0x80) ? 1 : 0;
results[1] = (data->prochot_override & 0x40) ? 1 : 0;
results[2] = data->prochot_override & 0x0f;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
/* grab old values */
int force2 = (data->prochot_override & 0x40) ? 1 : 0;
int prochot = data->prochot_override & 0x0f;
down(&data->update_lock);
if (*nrels_mag >= 3) {
data->prochot_override = LM93_PROCHOT_OVERRIDE_TO_REG(
results[0], results[1], results[2]);
}
if (*nrels_mag == 2) {
data->prochot_override = LM93_PROCHOT_OVERRIDE_TO_REG(
results[0], results[1], prochot);
}
if (*nrels_mag == 1) {
data->prochot_override = LM93_PROCHOT_OVERRIDE_TO_REG(
results[0], force2, prochot);
}
if (*nrels_mag >= 1) {
lm93_write_byte(client, LM93_REG_PROCHOT_OVERRIDE,
data->prochot_override);
}
up(&data->update_lock);
}
}
void lm93_prochot_interval(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
if (ctl_name != LM93_SYSCTL_PROCHOT_INTERVAL)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = LM93_INTERVAL_FROM_REG(
data->prochot_interval & 0x0f);
results[1] = LM93_INTERVAL_FROM_REG(
(data->prochot_interval & 0xf0) >> 4);
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
down(&data->update_lock);
if (*nrels_mag >= 2) {
results[1] = SENSORS_LIMIT(results[1], 0, 9);
data->prochot_interval =
(LM93_INTERVAL_TO_REG(results[1] << 4)) |
(data->prochot_interval & 0x0f);
}
if (*nrels_mag >= 1) {
results[0] = SENSORS_LIMIT(results[0], 0, 9);
data->prochot_interval =
(data->prochot_interval & 0xf0) |
LM93_INTERVAL_TO_REG(results[0]);
lm93_write_byte(client, LM93_REG_PROCHOT_INTERVAL,
data->prochot_interval);
}
up(&data->update_lock);
}
}
void lm93_vrdhot(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_VRDHOT1;
if (0 > nr || nr > 1)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = data->block1.host_status_1 & (1 << (nr+4)) ? 1 : 0;
*nrels_mag = 1;
}
}
void lm93_gpio(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
if (ctl_name != LM93_SYSCTL_GPIO)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = LM93_GPI_FROM_REG(data->gpi);
*nrels_mag = 1;
}
}
void lm93_pwm(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_PWM1;
u8 ctl2, ctl4;
if (0 > nr || nr > 1)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
ctl2 = data->block9[nr][LM93_PWM_CTL2];
ctl4 = data->block9[nr][LM93_PWM_CTL4];
results[1] = (ctl2 & 0x01) ? 1 : 0;
if (results[1]) /* show user commanded value if enabled */
results[0] = data->pwm_override[nr];
else /* show present h/w value if manual pwm disabled */
results[0] = LM93_PWM_FROM_REG(ctl2, (ctl4 & 0x07) ?
LM93_PWM_MAP_LO_FREQ : LM93_PWM_MAP_HI_FREQ);
*nrels_mag = 2;
}
else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
down(&data->update_lock);
ctl2 = lm93_read_byte(
client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2));
ctl4 = lm93_read_byte(
client, LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
ctl2 = (ctl2 & 0x0f) |
LM93_PWM_TO_REG(results[0], (ctl4 & 0x07) ?
LM93_PWM_MAP_LO_FREQ :
LM93_PWM_MAP_HI_FREQ);
if (*nrels_mag >= 2) {
if (results[1])
ctl2 |= 0x01;
else
ctl2 &= ~0x01;
}
/* save user commanded value */
data->pwm_override[nr] =
LM93_PWM_FROM_REG(ctl2, (ctl4 & 0x07) ?
LM93_PWM_MAP_LO_FREQ :
LM93_PWM_MAP_HI_FREQ);
lm93_write_byte(client,
LM93_REG_PWM_CTL(nr,LM93_PWM_CTL2), ctl2);
up(&data->update_lock);
}
}
}
void lm93_pwm_freq(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
int nr = ctl_name - LM93_SYSCTL_PWM1_FREQ;
u8 ctl4;
if (0 > nr || nr > 1)
return; /* ERROR */
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
ctl4 = data->block9[nr][LM93_PWM_CTL4];
results[0] = LM93_PWM_FREQ_FROM_REG(ctl4);
*nrels_mag = 1;
}
else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
down(&data->update_lock);
ctl4 = lm93_read_byte( client,
LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4));
ctl4 = (ctl4 & 0xf8) | LM93_PWM_FREQ_TO_REG(results[0]);
data->block9[nr][LM93_PWM_CTL4] = ctl4;
/* ctl4 == 0 -> 22.5KHz -> disable smart tach */
if (!ctl4)
lm93_disable_fan_smart_tach(client, data, nr);
lm93_write_byte(client,
LM93_REG_PWM_CTL(nr,LM93_PWM_CTL4), ctl4);
up(&data->update_lock);
}
}
}
void lm93_alarms(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct lm93_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
lm93_update_client(client);
results[0] = LM93_ALARMS_FROM_REG(data->block1);
*nrels_mag = 1;
}
}
static int __init lm93_init(void)
{
printk(KERN_INFO "lm93.o version %s (%s)\n", LM_VERSION, LM_DATE);
return i2c_add_driver(&lm93_driver);
}
static void __exit lm93_exit(void)
{
i2c_del_driver(&lm93_driver);
}
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
MODULE_DESCRIPTION("LM93 driver");
MODULE_LICENSE("GPL");
module_init(lm93_init);
module_exit(lm93_exit);
Reference in new issue View Git Blame Copy Permalink