mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-18 11:09:32 +00:00
Mark D. Studebaker
f5847d2f9d
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1549 7894878c-1315-0410-8ee3-d5d059ff63e0
518 lines
23 KiB
Plaintext
518 lines
23 KiB
Plaintext
lm_sensors CHANGES file
|
|
-----------------------
|
|
This is a list of the most important changes in 2.x versions. It is by
|
|
no means complete, listing only the most significant changes.
|
|
The ultimate way to know what has changed is to run diff, or even neater,
|
|
ask CVS about it:
|
|
|
|
* Checkout the archive (see doc/cvs for how you can do this)
|
|
* Determine which tags are valid, by running this command from the
|
|
project root directory:
|
|
cvs status -v -l Makefile
|
|
Valid tags are usually of the form V2-1-0 for version 2.1.0
|
|
* Ask cvs for the difference between two versions:
|
|
cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
|
|
for example:
|
|
cvs diff -r V2-0-0 -r V2-0-1 -u
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
2.6.6 (2002????)
|
|
NOTE: Requires i2c-2.6.6!!!
|
|
Library: Add support for MC1066; add multiple VRM version support for lm87;
|
|
enhance adm1023 support
|
|
Makefile: Take kernel source location from /lib/modules/x.x.x/build
|
|
Module adm1021: Add support for MC1066
|
|
Module dmi_scan: Rename symbol duplicated in kernel
|
|
Module i2c-sis630: added support for SiS730
|
|
Module i2c-sis645: improved support for SiS645/961
|
|
added support for SiS645DX/961 and SiS735
|
|
Module lm87: Add multiple VRM version support
|
|
Module w83781d: Fix in0/in1 initialization
|
|
Program mkpatch: Fix dmi_scan module compile
|
|
Program sensors: Add support for MC1066; fix w83781d temp3 alarm
|
|
Program sensors-detect: Add support for MC1066
|
|
|
|
2.6.5 (20020915)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
|
|
Library: Fix fan3_div writes for w8378* and it87; add vt8231
|
|
Module dmi_scan: new
|
|
Module ds1621: Fix enable/disable
|
|
Module eeprom: Do not corrupt 24RF08's when checksum=1
|
|
Module i2c-i801: Check for uninitialized base address;
|
|
enable if not enabled
|
|
Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
|
|
Module i2c-sis630: new
|
|
Module i2c-sis645: new
|
|
Module lm92: Fix in-kernel initialization
|
|
Module via686a: Remove VT8231 support
|
|
Module vt8231: new
|
|
Module w83781: recognize Asus "ASB100 Bach" as AS99127F
|
|
Program dmidecode: new
|
|
Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
|
|
Program mkpatch: Add Config.in entries for, lm92,
|
|
pcf8574, pcf8591, smsc47m1, vt1211;
|
|
add dmi_scan
|
|
Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
|
|
Program lm_sensors.init: fix stop()
|
|
Program sensord: Add /usr/local/etc to config file path;
|
|
add support for logging loadavg in RRD;
|
|
fix down-converting raw labels for RRD;
|
|
update chip support, still behind sensors
|
|
Program sensors: Add /usr/local/etc to config file path;
|
|
fix -c and -u flags; add vt8231
|
|
Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
|
|
refuse to run on IBM systems;
|
|
fix sysconfig module numbering;
|
|
change quick write to not corrupt 24RF08's
|
|
|
|
2.6.4 (20020719)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
File doc/vid: New
|
|
File include/sensors_vid.h: New
|
|
File sensors.conf.eg: Add vt1211, smsc47m1
|
|
Library: Add multiple VRM version support for adm1025, w83781d;
|
|
fix 'flex scanner jammed' on some systems;
|
|
add vt1211, smsc47m1, lm92;
|
|
fix access mode checking
|
|
Makefiles: For 2.4+ kernels, modules now install in
|
|
kernel/drivers/[i2c,sensors] , not misc/ , and
|
|
'make install' removes old versions in misc/ .
|
|
Use $CFLAGS and $CPPFLAGS if defined.
|
|
Module adm1025: Add multiple VID version support
|
|
Module ds1307: new
|
|
Module i2c-amd756: Add nVidia nForce support; fix block read length;
|
|
reliability improvements
|
|
Module i2c-hydra: Flush posted writes
|
|
Module i2c-i801: Add support for 82801DB (ICH4)
|
|
Module i2c-i810: Flush posted writes
|
|
Module i2c-savage4: new
|
|
Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
|
|
Module i2c-voodoo3: Flush posted writes
|
|
Module ds1307: New
|
|
Module lm92: New
|
|
Module smbus-arp: new
|
|
Module smsc47m1: new
|
|
Module via686a: Add support for VT8231 sensors
|
|
Module vt1211: new
|
|
Module w83781d: Add multiple VID version support; fix temp alarms
|
|
Program eeprom: new
|
|
Program i2cdump: Add smbus block command specification, add PEC support
|
|
Program lm_sensors.init: new
|
|
Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
|
|
pcf8574, pcf8591, smsc47m1, vt1211
|
|
Program p4b_smbus: Add support for ICH4
|
|
Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
|
|
Program sensord.init: Renamed, was prog/init/sensors
|
|
Program sensord: Major update, now requires rrd source;
|
|
not compiled by default
|
|
Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
|
|
(don't display algo. and adap.) option;
|
|
add vt1211, smsc47m1, lm92
|
|
Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
|
|
add 82801DB, LM85; fix perl warnings;
|
|
generate /etc/sysconfig/lm_sensors for
|
|
lm_sensors.init script
|
|
|
|
2.6.3 (20020322)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
|
|
File doc/chips/it87: add more temp_type help
|
|
File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
|
|
add adm1021 section; add lm87 AIN[1,2] template;
|
|
swap negative voltage limits for 782d,783s,627hf,
|
|
697hf,it87; add more it87 help; swap neg. voltage
|
|
limits for lm78(-j), lm79, w83781d, as99127f
|
|
Library: Add PCF8591, W83697HF, ADM1023 support;
|
|
fix w83* fan_min computes;
|
|
swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
|
|
Module adm1024: Add MODULE_LICENSE("GPL")
|
|
Module bt869: Add s-video out and DVD resolution support
|
|
Module eeprom: Add support for locations 128-255; rename /proc entries in hex
|
|
Module fscscy: implement min/max for voltages and fans
|
|
Module i2c-amd756: Add support for AMD768
|
|
Module i2c-i810: Add support for 810E
|
|
Module i2c-keywest: Big update, sync with kernel 2.4.18
|
|
Module i2c-piix4: Check for uninitialized base address
|
|
Module i2c-sis5595: Blacklist 645, 735
|
|
Module i2c-viapro: Check for uninitialized base address
|
|
Module gl518sm: Standardize /proc entries in0-3
|
|
Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
|
|
fan -> fan1; fix temp2 limit writes
|
|
Module pcf8574: Add support for PCF8574A; /proc interface changed
|
|
Module pcf8591: new
|
|
Module sis5595: Blacklist 645, 735
|
|
Module w83781d: Add W83697HF support; allow force_subclients parameter
|
|
for Tyan 2460
|
|
Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
|
|
Program decode-vaio.pl: new
|
|
Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
|
|
add text output
|
|
Program init/sensors: New SysV init script
|
|
Program mkpatch.pl: Add support for fscscy, add more help entries
|
|
Program p4b_smbus: new
|
|
Program rrd: Install summ_week.cgi
|
|
Program sensors: Add PCF8591, W83697HF, ADM1023 support,
|
|
clean up chassis intrusion prints
|
|
Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
|
|
fix Via686a and it87 detection;
|
|
add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
|
|
fix uninitialized values; it87 beats lm78
|
|
|
|
2.6.2 (20011118)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
Chip Modules (all): malloc.h -> slab.h
|
|
Modules (all): Add MODULE_LICENSE("GPL")
|
|
File doc/FAQ: More updates and additions
|
|
File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
|
|
Library: Add fscpos and fscscy support, fix gl520 in4 ID,
|
|
update it87 alarm ID's.
|
|
Module fscpos: new (Fujitsu-Siemens Poseidon driver)
|
|
Module fscscy: new (Fujitsu-Siemens Scylla driver)
|
|
Module i2c-amd756: Improve busy handling/printk's
|
|
Module i2c-i801: Add 82801CA/CAM support
|
|
Module i2c-keywest: Sync with PPC people, it works now
|
|
Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
|
|
Module i2c-viapro: Add Via VT8233 support
|
|
Module it87: Merge alarm_* /proc entries to alarms
|
|
Module sis5595: Fix support for rev B0
|
|
Module via686a: Make limit initializations reliable
|
|
Module w83781d: Allow init=0 parameter to bypass initialization
|
|
Program isadump: Add flat address space (PCI) support
|
|
Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
|
|
fscpos, it87, maxilife, mtp008
|
|
Program sensors: Fix w83781d temp precision
|
|
Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
|
|
Fujitsu Poseidon and Scylla,
|
|
Intel 82443MX and 82801CA/CAM detection,
|
|
add ITE 8172G detection (driver in kernel 2.4.10)
|
|
|
|
2.6.1 (20010830)
|
|
File BUGS: Updated
|
|
File doc/FAQ: More updates and additions
|
|
File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
|
|
File sensors.conf.eg: Fix/enhance it87 section
|
|
Library: ds1621 and it87 updates
|
|
Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
|
|
Module i2c-amd756: Add AMD 766 support
|
|
Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
|
|
Module i2c-piix4: Add Serverworks CSB5 support
|
|
Module i2c-sis5595: Recognize unsupported chips and refuse to load
|
|
Module adm1025: Fixed temp2 min/max writes
|
|
Module ds1621: Add 12-bit precision mode
|
|
Module it87: Enable all alarms, add in8 support, add sensor type selection
|
|
Module sensors: Don't initialize i2c-proc (moved to i2c-core);
|
|
remove support for module
|
|
Module sis5595: Recognize unsupported chips and refuse to load
|
|
Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
|
|
Program eepromer: new
|
|
Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
|
|
of sensors.c as a module in kernel
|
|
Program sensors: it87 updates; adjust temp. precision for some chips
|
|
Program sensors-detect: Fix ADM1024 and ADM1025 detection;
|
|
recognize unsupported SiS chips;
|
|
recognize AMD 766 and Serverworks CSB5.
|
|
|
|
2.6.0 (20010612)
|
|
NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
|
|
If your make fails because it can't find <linux/i2c-proc.h>, you
|
|
forgot this step!!!
|
|
File doc/FAQ: Many, many updates and additions
|
|
File doc/busses/i2c-sis5595: new
|
|
File doc/busses/i2c-tsunami: new
|
|
File doc/chips/it87: new
|
|
File doc/chips/via686a: Claim support for 686b.
|
|
File README.thinkpad: new
|
|
File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
|
|
Add lm87, adm9240, ds1780, lm81 templates;
|
|
Enhance help comments in file;
|
|
Add Tyan S2510 dual-MTP008 example;
|
|
Make separate sis5595 section.
|
|
Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
|
|
Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
|
|
Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
|
|
Add support for maxilife-nba and amd1024;
|
|
Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
|
|
Chip Modules (all ISA): Remove #include "i2c-isa.h"
|
|
Chip Modules (all): Change from sensors_* to i2c_* globals
|
|
for new i2c-proc.[ch]
|
|
Makefiles: enhance to support Alpha architecture
|
|
Module adm1021: Fix lm84 and gl523sm support
|
|
Module adm1024: new
|
|
Module i2c-i801: Chip detection cleanup
|
|
Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
|
|
Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
|
|
Module i2c-tsunami: New
|
|
Module i2c-via: Ensure i2c bus is tristated correctly.
|
|
Module it87: new driver for IT8705, IT8712, Sis950 chips
|
|
Module lm78: Recognize chipid=0x20
|
|
Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
|
|
Module mtp008: Fix temp initializations;
|
|
Save BIOS pin configuration of temps and fans;
|
|
Fix sensor type reads/writes and fan min writes;
|
|
Fix spurious invalid sensor type messages
|
|
Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
|
|
used for patched kernel now.
|
|
Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
|
|
Module sis5595: Fix temp, add in4 for chip revision 0xc0;
|
|
Allow force_addr=0xaddr
|
|
Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
|
|
Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
|
|
reading changes; Add messages for subclient
|
|
registration failure
|
|
Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
|
|
Program i2cset: new
|
|
Program isadump: fix for Alpha arch. compiles
|
|
Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
|
|
Remove ltc1710; Fix i2c_sis5595 typo;
|
|
Support kernel 2.4.5 makefile change;
|
|
Add i2c-tsunami; fixed i2c-voodoo3 configuration
|
|
Program sens_update_rrd: new
|
|
Program sensord: Add -d (debug) and -p (pid-file) options
|
|
Program sensors: Change reported version from 1.3 to the lm_sensors version;
|
|
Fix swapped limit and hysteresis on 9240, 5595, 686a;
|
|
Change mtp008 temps from max/min to limit/hyst;
|
|
Add maxilife-nba, adm1024, it87 support.
|
|
Program sensors-detect: Recognize lm78 with chipid=0x20;
|
|
Recognize SMSC Victory66 South Bridge;
|
|
Add devfs /dev/i2c/x support;
|
|
Add adm1024, it87xx support; Add thinkpad warning.
|
|
Program tellerstats: new
|
|
|
|
2.5.5 (20010115)
|
|
NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
|
|
you have kernel 2.4.0-prerelease or greater.
|
|
Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
|
|
File doc/developers/proc: new
|
|
File sensors.conf.eg: Add mtp008 entries, adm1025 entries
|
|
Library: Add ds1621, mtp008 support
|
|
Module adm1021: Add support for adm1021a / adm1023
|
|
Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
|
|
Module adm1025: Add support for remote temp; rename /proc entries to
|
|
in[0-5] and temp[1-2]; fix negative temp readings
|
|
Module adm9240: Rename /proc entries to in[0-5]
|
|
Module ddcmon: allow force and force_ddcmon parameters
|
|
Module ds1621: new
|
|
Module i2c-ali1535: Enhance error checking and recovery; add mutex
|
|
Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
|
|
Module i2c-piix4: add support for ServerWorks southbridge OSB4
|
|
Module lm87: cleanup, update voltage calculations
|
|
Module mtp008: new
|
|
Module pcf8574: change update time to 5 seconds
|
|
Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
|
|
Module w83781d: fix beep setting via /proc
|
|
Programs editticket, readticket: new
|
|
Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
|
|
Program mkpatch.pl: more fixes; now adds many more modules
|
|
Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
|
|
add adm1025 temp2; report temp limits correctly as
|
|
min/max or limit/hysteresis; print message if no
|
|
sensors are found. Removed false errors from lm87 reads.
|
|
Program sensors-detect: Add ds1621, mtp008 detection;
|
|
add ServerWorks detection
|
|
|
|
2.5.4 (20001012)
|
|
Module i2c-viapro: Add support for Via 596B (0x3051)
|
|
Program m7101: moved to CVS tree, updated for 2.4.0 kernels
|
|
Program mkpatch.pl: fixed infinite loop
|
|
Program sensors-detect: Detect Via 596B (0x3051)
|
|
|
|
2.5.3 (20001008)
|
|
NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
|
|
File useful_addresses.html: update
|
|
Library: Add lm87 support
|
|
Module pcf8574: new
|
|
Module i2c-ali1535: new
|
|
Module i2c-ali15x3: removed force #ifdef.
|
|
Module i2c-i801: support Intel 82801BA (815E chipset)
|
|
Module i2c-i801: add i2c block write support, fix smbus block bugs
|
|
(requires i2c 2.5.3 package)
|
|
Module i2c-i810: support Intel 82815
|
|
Module lm87: new
|
|
Module sensors: Fix for kernel 2.4.0-test8
|
|
(remove copy_to_user_ret and put_user_ret)
|
|
Module w83781d: limit fan divisors to 8 max. for as99127f
|
|
Program decode-dimms: Add html output option, update for SPD spec 1.2B.
|
|
Program i2cdump: Add smbus block read support
|
|
Programs i2cdetect, i2cdump: Improve error reporting
|
|
Program sensors: new switch -u (--unknown)
|
|
Program sensors-detect: detect Intel 82801BA (815E chipset)
|
|
Program sensors-detect: detect Intel 82815
|
|
Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
|
|
Program sensors-detect: detect National LM87
|
|
Program sensors-detect: detect nVidia devices supported by i2c-riva.o
|
|
Program sensors-detect: Improve error reporting
|
|
|
|
2.5.2 (20000709)
|
|
File sensors.conf.eg: Fix lm80 in8 calculation
|
|
Module w83781d: W83783S no longer crashes on unloading
|
|
Program sensors-detect: more robustness in case of unknown i2c adapters
|
|
Program sensors-detect, libsensors: fix eeprom size reporting
|
|
Program sensord: more flexibility, support for alarm scanning etc.
|
|
Program sensors: support for ignore setting on sensor alarms.
|
|
Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
|
|
|
|
2.5.1 (20000618)
|
|
Library: Add adm1025 support
|
|
Module adm1025: new
|
|
Module ddcmon: Fixed bus scan which could hang SMBus
|
|
Module i2c-keywest: new
|
|
Module maxilife: Add support for Maxilife '99 (NBA)
|
|
Module via686a: Enable sensors if not enabled by BIOS
|
|
Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
|
|
Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
|
|
Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
|
|
Module w83781d: Fis as99127f fan speed (was 66% too high)
|
|
Module w83781d: Improve beep input checking
|
|
Program i2cdump: Add Winbond-style bank selection
|
|
Program isadump: Add Winbond-style bank selection
|
|
Program sensors: Add adm1025 support.
|
|
Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
|
|
Program sensors-detect: Fix i801 detection, add adm1025 driver entry
|
|
File sensors.conf.eg: Add Maxilife '99 entries
|
|
File sensors.conf.eg: Remove some as99127f entries.
|
|
Note: For as99127f, reinstall sensors.conf.eg manually (make install
|
|
won't reinstall it) or else 'sensors -s' will fail.
|
|
|
|
2.5.0 (20000312)
|
|
Dropped all kernel 2.0 and 2.1 compatibility
|
|
Module i2c-i810: new
|
|
Module ddcmon: new
|
|
Module via686a: new
|
|
Module i2c-amd756: fixed region request
|
|
Module i2c-voodoo3: Converted to use i2c-algo-bit layer
|
|
Module w83781d: Don't change pin settings at initialization;
|
|
also fix chip detection.
|
|
Library: Support for ddcmon and via686a
|
|
Program sensors-detect: Support for ddcmon and via686a
|
|
Program sensors: Support for eeprom, ddcmon and via686a
|
|
|
|
2.4.5 (20000116)
|
|
Introduced DESTDIR installation prefix
|
|
Module lm80: fixes, temperature now read and set correctly
|
|
Module i2c-voodoo3: driver enhancements
|
|
Module w83781d: fixes, AS99127 works much better now
|
|
Library: New ignore keyword in config file
|
|
Programs: Support for new ignore keyword
|
|
Program sensors-detect: Support for MGA detections
|
|
|
|
2.4.4 (19991201)
|
|
Addition of the alpha release of AMD 756 SMBus host support.
|
|
Many fixes and updates to the gl518sm driver
|
|
Updates and fixes for device detection
|
|
|
|
2.4.0 (19990920)
|
|
Too much to list.
|
|
i2c and smbus parts are split off to a separate i2c package.
|
|
New drivers and other stuff.
|
|
|
|
2.3.4 (19990616)
|
|
Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
|
|
All: Now compiles against kernel 2.0.x (again ;)
|
|
Module gl518sm: some updates and refinements
|
|
|
|
2.3.3 (19990603)
|
|
All: Now compiles against kernel 2.3.x (x >= 1)
|
|
Module i2c-voodoo3: Timing issue fixes
|
|
Module bt869: Seems to be functional and relatively well tested
|
|
Many modules were modified to be more compatible with the new
|
|
Mutex structure in the new experimental kernels.
|
|
|
|
2.3.2 (19990507)
|
|
Module i2c-hydra: Now compiles on 2.0.x kernels
|
|
Module i2c-lm75: Slightly better detection
|
|
* New, but not compiled by default:
|
|
Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
|
|
Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
|
|
|
|
2.3.1 (19990501)
|
|
All: Now compiles on PPC
|
|
Module i2c-hydra: NEW
|
|
Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
|
|
Module w83781d: Removed deadlock (mutex was not initialized)
|
|
Documentation: A few glitches removed
|
|
Makefile: default module installation directory is now
|
|
/lib/modules/current/extra/misc
|
|
Program sensors-detect: PPC Hydra now detected
|
|
Program sensors: Now prints complete GL518SM information
|
|
Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
|
|
|
|
2.3.0 (19990422)
|
|
All: Many, many changes and improvements
|
|
All: Many small bugs and problems removed
|
|
Modules: New insmod parameters
|
|
Modules: Much improved chip detection
|
|
Module maxilife: NEW
|
|
Module adm1021: MAX1617A now also supported
|
|
Module adm9240: DS1780 now also supported
|
|
Module w83781d: W83782D and W83783S now also supported
|
|
Program sensors-detect: NEW
|
|
Library: All chips now supported
|
|
Documentation: Very much improved
|
|
|
|
2.2.2 (199903??)
|
|
Just some minor updates and bug fixes.
|
|
|
|
2.2.1 (19990218)
|
|
All: Removed compile warnings
|
|
Module i2c-dev: Small bug removed if DEBUG=1 was used
|
|
Module sis5595: Now compiles for 2.0 kernels
|
|
Module adm1021: Detection corrected
|
|
|
|
2.2.0 (19990216)
|
|
All: Set copyrights to include 1999
|
|
All: Small bugfixes
|
|
I2C: Upgraded to newest archive of Simon Vogl
|
|
Module i2c-dev: NEW
|
|
Module i2c-ali15x3: NEW
|
|
Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
|
|
directories, and somewhat improved
|
|
Module sis5595: NEW
|
|
Modules: Renamed all bus modules to i2c-*, new directory lay-out
|
|
Library: Support for new chip drivers, several small bugs fixed
|
|
Library manual pages: NEW
|
|
Program i2cdetect: Moved to detect directory
|
|
Program detect.pl: NEW
|
|
Program doc-features: NEW
|
|
Program sensors: Added man-page
|
|
Document BUGS: Added cdrom bug and kernel i2c conflict
|
|
|
|
2.1.2 (19990116)
|
|
Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
|
|
Module gl518sm.o: yet more bug fixes. It should at long last be usable now
|
|
Documentation in doc/kernel: NEW
|
|
|
|
2.1.1 (19990107)
|
|
Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
|
|
and older
|
|
Module gl518sm.o: Miscelaneous bugs and problems solved
|
|
Program isadump: NEW
|
|
|
|
2.1.0 (19981230)
|
|
Library: Completely NEW
|
|
Program sensors: NEW
|
|
Program grab_busses: NEW
|
|
Program decode-dimms: More information
|
|
Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
|
|
Module w83781d.o: NEW
|
|
Module lm80.o: NEW
|
|
Module gl518sm.o: new procfile beep, several small updates
|
|
Modules: Now use pin readings, no more scaling within the kernel (use the
|
|
library instead)
|
|
|
|
2.0.2 (19981214)
|
|
Module eeprom.o: NEW
|
|
Program decode-dimms: NEW
|
|
Modules: fill_inode fix, will stop segfaults on unloading in kernels after
|
|
2.1.58
|
|
Modules: Somewhat less verbose on transfers
|
|
Module lm78.o now recognizes and handles lm78-j and lm79
|
|
|
|
2.0.1 (1998121?)
|
|
Module gl518sm.o updates, to make it actually work
|
|
Module lm75.o high/low-byte swapping write bug fixed
|
|
|
|
2.0.0 (19981209)
|
|
Initial release
|