mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
71 lines
1.7 KiB
Plaintext
71 lines
1.7 KiB
Plaintext
# Winbond W83627EHF configuration originally contributed by Leon Moonen
|
|
# Modified for ASUS P3-PH4C by Florian Kleinmanns
|
|
chip "w83627ehf-*" "w83627dhg-*"
|
|
|
|
label in0 "VCore"
|
|
label in1 "+12V"
|
|
label in2 "AVCC"
|
|
# ACPI <http://www.lm-sensors.org/wiki/AsusFormulaHacking> says nothing about AVCC, so you might want to uncomment:
|
|
#ignore in2
|
|
label in3 "+3.3V"
|
|
ignore in4
|
|
label in5 "+5V"
|
|
ignore in6
|
|
label in7 "VSB"
|
|
label in8 "VBAT"
|
|
# ACPI says nothing about VSB and VBAT, so you might want to uncomment:
|
|
#ignore in7
|
|
#ignore in8
|
|
|
|
# The W83627DHG has no in9, uncomment the following line
|
|
ignore in9
|
|
|
|
# ACPI says:
|
|
compute in1 @*(1+(56/10)), @/(1+(56/10))
|
|
# ACPI says... but obviously wrong:
|
|
# compute in3 @*(1+(34/34)), @/(1+(34/34))
|
|
# ACPI says:
|
|
compute in5 @*(1+(22/10)), @/(1+(22/10))
|
|
# ACPI says nothing about in8, so I guess:
|
|
compute in8 @*1.42, @/1.42
|
|
|
|
# Values for Conroe-L (Celeron 420/430/440)
|
|
set in0_min 1.0*0.95
|
|
set in0_max 1.3375*1.05
|
|
|
|
set in1_min 12.0*0.9
|
|
set in1_max 12.0*1.1
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
set in3_min 3.3*0.95
|
|
set in3_max 3.3*1.05
|
|
set in5_min 5.0*0.95
|
|
set in5_max 5.0*1.05
|
|
set in7_min 3.3*0.95
|
|
set in7_max 3.3*1.05
|
|
set in8_min 3.0*0.85
|
|
set in8_max 3.0*1.15
|
|
|
|
# Fans
|
|
label fan1 "Case Fan"
|
|
label fan2 "CPU Fan"
|
|
label fan3 "Aux Fan"
|
|
ignore fan1
|
|
ignore fan3
|
|
ignore fan4
|
|
ignore fan5
|
|
set fan2_min 600
|
|
|
|
# Temperatures
|
|
label temp1 "Sys Temp"
|
|
label temp2 "CPU Temp"
|
|
label temp3 "AUX Temp"
|
|
|
|
ignore temp3
|
|
# ACPI says:
|
|
set temp1_over 60
|
|
set temp1_hyst 55
|
|
set temp2_over 45
|
|
set temp2_hyst 40
|
|
|