mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-24 12:04:33 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
53 lines
1.3 KiB
Plaintext
53 lines
1.3 KiB
Plaintext
# Example configuration file for the Inside Technology 786LCD motherboard:
|
|
|
|
chip "it87-*"
|
|
|
|
label in0 "VCore 1"
|
|
label in1 "VCore 2"
|
|
label in2 "+3.3V"
|
|
label in3 "+5V"
|
|
label in4 "+12V"
|
|
label in5 "3.3 Stdby"
|
|
label in6 "-12V"
|
|
label in7 "Stdby"
|
|
label in8 "VBat"
|
|
|
|
# vid not monitored by IT8705F
|
|
ignore cpu0_vid
|
|
|
|
# in0 will depend on your processor VID value, set to voltage specified in
|
|
# bios setup screen
|
|
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
compute in4 ((30/10) +1)*@ , @/((30/10) +1)
|
|
compute in6 (1+232/56)*@ - 4.096*232/56, (@ + 4.096*232/56)/(1+232/56)
|
|
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
|
|
set in0_min 1.7 * 0.95
|
|
set in0_max 1.7 * 1.05
|
|
set in1_min 2.4
|
|
set in1_max 2.6
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in3_min 5.0 * 0.95
|
|
set in3_max 5.0 * 1.05
|
|
# +- 12V are very poor tolerance on this board. Verified with voltmeter
|
|
set in4_min 12 * 0.90
|
|
set in4_max 12 * 1.10
|
|
set in5_min 3.3 * 0.95
|
|
set in5_max 3.3 * 1.05
|
|
set in6_max -12 * 0.90
|
|
set in6_min -12 * 1.10
|
|
set in7_min 5 * 0.95
|
|
set in7_max 5 * 1.05
|
|
|
|
# Temperature
|
|
label temp1 "CPU Temp"
|
|
ignore temp2
|
|
ignore temp3
|
|
|
|
# Fans
|
|
set fan1_min 3000
|
|
ignore fan2
|
|
ignore fan3
|