mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-08 16:11:26 +00:00
Mark D. Studebaker
65f60a55ce
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@319 7894878c-1315-0410-8ee3-d5d059ff63e0
44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
|
|
|
|
Supports the following Winbond chips:
|
|
|
|
Chip #vin #fanin #pwm #temp wchipid i2c ISA
|
|
w83781d 7 3 0 3 0x10 yes yes
|
|
w83782d 9 3 2-4 3 0x30 yes yes
|
|
w83783s 5-6 3 2 1-2 0x40 yes no
|
|
|
|
|
|
The driver only updates its values each 1.5 seconds; reading it more often
|
|
will do no harm, but will return 'old' values.
|
|
|
|
|
|
|
|
|
|
To do:
|
|
-----
|
|
782d/783s clock speed select
|
|
782d beep 3 register
|
|
782d programmable pins
|
|
783s temp2 (labeled as temp1 in data sheet) at different location
|
|
than 781d/782d, not implemented yet.
|
|
781d R-T table
|
|
782d/783s undocumented thermistor/PII/3904 select bits
|
|
|
|
|
|
Notes:
|
|
-----
|
|
783s has no in1 for compatibility with the 781d/782d.
|
|
|
|
783s pin is programmable for -5V or temp1; defaults to -5V,
|
|
no control in driver so temp1 doesn't work.
|
|
|
|
782d and 783s datasheets differ on which is pwm1 and which is pwm2.
|
|
We chose to follow 782d.
|
|
|
|
782d and 783s pin is programmable for fan3 input or pwm2 output;
|
|
defaults to fan3 input.
|
|
no control in driver so pwm2 doesn't work.
|
|
|
|
782d has pwm1-2 for isa, pwm1-4 for i2c. (pwm3-4 share pins with
|
|
the isa pins)
|