mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
96 lines
1.7 KiB
Plaintext
96 lines
1.7 KiB
Plaintext
# Contributed by Frank Enderle.
|
|
|
|
|
|
# This is the sensors.conf configuration file for ASUS P5B-E (and maybe it's different versions)
|
|
# Everythings based on the guide at http://www.lm-sensors.org/wiki/AsusFormulaHacking. The formulas
|
|
# and ranges are based on the /proc/acpi/dsdt readings of a P5B-E board with a E6600 CPU.
|
|
|
|
chip "w83627dhg-*"
|
|
# == VOLTAGES ==
|
|
# Vcore
|
|
label in0 "Vcore"
|
|
set in0_min 0.85
|
|
set in0_max 1.6
|
|
|
|
# +12V
|
|
label in1 "+12V"
|
|
compute in1 @*(66/10), @/(66/10)
|
|
set in1_min 10.2
|
|
set in1_max 13.8
|
|
|
|
# unused
|
|
ignore in2
|
|
|
|
# +3.3V
|
|
label in3 "+3.3V"
|
|
# this formula is stored in the ACPI, but it seems not to work
|
|
# compute in3 @*(68/34), @/(68/34)
|
|
set in3_min 2.97
|
|
set in3_max 3.63
|
|
|
|
# unused
|
|
ignore in4
|
|
|
|
# +5V
|
|
label in5 "5V"
|
|
compute in5 @*(32/10), @/(32/10)
|
|
set in5_min 4.5
|
|
set in5_max 5.5
|
|
|
|
# unused
|
|
ignore in6
|
|
ignore in7
|
|
ignore in8
|
|
ignore in9
|
|
|
|
# == TEMPERATURES ==
|
|
# Mainboard
|
|
label temp1 "Sys Temp"
|
|
set temp1_over 95
|
|
set temp1_hyst 60
|
|
|
|
# CPU
|
|
label temp2 "CPU Temp"
|
|
set temp2_over 95
|
|
set temp2_hyst 45
|
|
|
|
# unused
|
|
ignore temp3
|
|
|
|
# == FANS ==
|
|
# If you miss a certain fan set it to ignore
|
|
# Chassis 1
|
|
# ignore fan1
|
|
label fan1 "Cha1 Fan"
|
|
set fan1_min 800
|
|
|
|
# CPU
|
|
# ignore fan2
|
|
label fan2 "CPU Fan"
|
|
set fan2_min 600
|
|
|
|
# Powersupply
|
|
ignore fan3
|
|
#label fan3 "Pwr Fan"
|
|
#set fan3_min 800
|
|
|
|
# unused
|
|
ignore fan4
|
|
|
|
# Chassis 2
|
|
# ignore fan5
|
|
label fan5 "Cha2 Fan"
|
|
set fan5_min 800
|
|
|
|
# == CORE TEMPERATURES ==
|
|
# This requires the coretemp patch applied
|
|
# Maximums are autodetected by the driver depending on the CPU
|
|
# Core0
|
|
chip "coretemp-isa-0000"
|
|
label temp1 "Core0 Temp"
|
|
|
|
# Core1
|
|
chip "coretemp-isa-0001"
|
|
label temp1 "Core1 Temp"
|
|
|