mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-08 16:11:26 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
62 lines
1.5 KiB
Plaintext
62 lines
1.5 KiB
Plaintext
# lm_sensors configuration file for the CFX3200-M2/G infinity motherboard
|
|
# 2007-07-06, George Multescu
|
|
|
|
chip "it8716-*"
|
|
|
|
# Voltages
|
|
|
|
label in0 "VCore" #-->cpu voltage
|
|
label in1 "VDDR"
|
|
label in2 "+3.3V" # VCC3
|
|
label in3 "+5V" # VCC
|
|
label in4 "V_NBr" #--> notrh bridge voltage
|
|
label in5 "+12V"
|
|
ignore in6
|
|
label in7 "5VSB" # VCCH
|
|
label in8 "VBat"
|
|
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
compute in5 ((30/10)+1.02)*@ , @/((30/10)+1.02) #-->not sure about this one, check this value(+12v) against bios
|
|
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
|
|
# If vid (nominal CPU voltage) isn't correct, hardcode the correct value
|
|
# instead.
|
|
# set in0_min vid * 0.95
|
|
# set in0_max vid * 1.05
|
|
# set in1_min 1.8 * 0.95
|
|
# set in1_max 1.8 * 1.05
|
|
# set in2_min 3.3 * 0.95
|
|
# set in2_max 3.3 * 1.05
|
|
# set in3_min 5 * 0.95
|
|
# set in3_max 5 * 1.05
|
|
set in4_min 1.18 * 0.95
|
|
set in4_max 1.18 * 1.05
|
|
set in5_max 12 * 1.05
|
|
set in5_min 12 * 0.95
|
|
# set in6_max -5 * 0.95
|
|
# set in6_min -5 * 1.05
|
|
# set in7_min 5 * 0.95
|
|
# set in7_max 5 * 1.05
|
|
# The chip does not support in8 min/max
|
|
|
|
# Temperatures
|
|
|
|
|
|
label temp1 "System Temp"
|
|
label temp2 "CPU Temp"
|
|
label temp3 "ChipsetTemp"
|
|
|
|
# set temp1_over 60
|
|
# set temp1_low 10
|
|
# set temp2_over 50
|
|
# set temp2_low 10
|
|
|
|
# Fans
|
|
|
|
label fan1 "Chipset Fan"
|
|
label fan2 "CPU Fan"
|
|
label fan3 "System fan"
|
|
|
|
# set fan1_min 2000
|
|
# set fan2_min 2000
|