mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
108 lines
1.9 KiB
Plaintext
108 lines
1.9 KiB
Plaintext
# Configuration file contributed by Dominik Egert.
|
|
|
|
|
|
# libsensors configuration file
|
|
# -----------------------------
|
|
#
|
|
# For the Gigabyte B75-D3V Rev: 1.2
|
|
#
|
|
#
|
|
#
|
|
|
|
######################################
|
|
# VOLTAGES #
|
|
# These figures are from estimations #
|
|
# based on values provided in BIOS. #
|
|
# This means that some of them may #
|
|
# be mixed up. #
|
|
######################################
|
|
|
|
|
|
##############################################
|
|
chip "it8728-isa-0a30"
|
|
|
|
########
|
|
# Fans
|
|
label fan1 "CPU-Fan"
|
|
set fan1_min 1000
|
|
|
|
label fan2 "System Fan 1"
|
|
set fan2_min 450
|
|
|
|
label fan3 "System Fan 2"
|
|
set fan3_min 450
|
|
|
|
label fan4 "System Fan 3"
|
|
set fan4_min 450
|
|
|
|
ignore fan5 #"Chassis Fan" # It is not connected, no pinout available.
|
|
|
|
|
|
################
|
|
# Temperatures
|
|
label temp1 "System Temperature"
|
|
set temp1_min 10
|
|
set temp1_max 60
|
|
|
|
ignore temp2
|
|
#label temp2 "Unknown" # Does not seem to give sensible data (Always shows 25)
|
|
|
|
label temp3 "Chipset Temperature"
|
|
set temp3_min 10
|
|
set temp3_max 55
|
|
|
|
|
|
############
|
|
# Voltages
|
|
label in0 "Vtt"
|
|
set in0_min 1.020
|
|
set in0_max 1.080
|
|
|
|
label in1 "+3.3V"
|
|
set in1_min 3.3 * 0.95
|
|
set in1_max 3.3 * 1.05
|
|
compute in1 1.635*@,@/1.635
|
|
|
|
label in2 "+12V"
|
|
set in2_min 12.0 * 0.95
|
|
set in2_max 12.0 * 1.05
|
|
compute in2 6.0*@,@/6.0
|
|
|
|
label in3 "+5V"
|
|
set in3_min 5.0 * 0.95
|
|
set in3_max 5.0 * 1.05
|
|
compute in3 2.5*@,@/2.5
|
|
|
|
label in4 "Vaxg IGD"
|
|
set in4_min 0.800
|
|
set in4_max 1.000
|
|
|
|
label in5 "CPU Vcore"
|
|
set in5_min 0.750
|
|
set in5_max 1.150
|
|
|
|
label in6 "Dram Voltage"
|
|
set in6_min 1.450
|
|
set in6_max 1.550
|
|
|
|
label in7 "3.3 VSB"
|
|
set in7_min 3.3 * 0.95
|
|
set in7_max 3.3 * 1.05
|
|
|
|
label in8 "Vbat"
|
|
|
|
# Other sensor readings
|
|
label intrusion0 "Chassis Open"
|
|
#set intrusion0_alarm 0
|
|
|
|
|
|
##############################################
|
|
chip "acpitz-virtual-0"
|
|
|
|
ignore temp1
|
|
#label temp1 "ACPI Thermal Zone 0 Temp1" # Shows always 27.8
|
|
|
|
ignore temp2
|
|
#label temp2 "ACPI Thermal Zone 0 Temp2" # Shows always 29.8
|
|
|