mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-24 12:04:33 +00:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
83 lines
2.1 KiB
Plaintext
83 lines
2.1 KiB
Plaintext
# Example configuration for the SuperMicro PDSMi+.
|
|
# Contributed by Romain Dolbeau & Jean Delvare
|
|
|
|
|
|
# settings for the supermicro PDSMi+
|
|
#
|
|
# Notes:
|
|
# 1) You need lm-sensors >= 2.10.2, otherwise you get an error about
|
|
# missing temp6.
|
|
#
|
|
# Originally written by Romain Dolbeau <romain@dolbeau.org>
|
|
# Uses at your own risk !
|
|
chip "w83793-i2c-*-2f"
|
|
|
|
# 0x10, CPU Core
|
|
label in0 "CPU Core"
|
|
# 0x11, unconnected according to support, 1.5V in BIOS ?
|
|
label in1 "+1.5V"
|
|
set in1_min 1.5*0.95
|
|
set in1_max 1.5*1.05
|
|
# 0x12, unconnected according to support, VTT=1.2V in BIOS ?
|
|
label in2 "VTT"
|
|
set in2_min 1.2*0.95
|
|
set in2_max 1.2*1.05
|
|
# 0x14, -12V
|
|
label in3 "-12V"
|
|
# From Supermicro support information...
|
|
# compute in3 (((@/8)*18500)/256)-16, (((@+16)*256)/18500)*8
|
|
# ... but this from Jean Delvare works better in pratice
|
|
compute in3 (@ * 5.14) - 14.91, (@ + 14.91) / 5.14
|
|
set in3_min -12*1.05
|
|
set in3_max -12*0.95
|
|
# 0x15, DIMM
|
|
label in4 "DIMM"
|
|
# 0x16, +3.3V
|
|
label in5 "+3.3V"
|
|
set in5_min 3.3*0.95
|
|
set in5_max 3.3*1.05
|
|
# 0x17, +12V
|
|
label in6 "+12V"
|
|
compute in6 @*12,@/12
|
|
set in6_min 12*0.95
|
|
set in6_max 12*1.05
|
|
# Ox18, +5V
|
|
label in7 "+5V"
|
|
compute in7 @-0.15,@+0.15
|
|
set in7_min 5*0.95
|
|
set in7_max 5*1.05
|
|
# 0x19, 5VSB
|
|
label in8 "5VSB"
|
|
compute in8 @-0.15,@+0.15
|
|
set in8_min 5*0.95
|
|
set in8_max 5*1.05
|
|
# 0x1a, Battery Voltage
|
|
label in9 "VBAT"
|
|
|
|
label temp1 "CPU Temp"
|
|
ignore temp2
|
|
ignore temp3
|
|
ignore temp4
|
|
# System Temp used to live at temp5, but was moved to temp6 for some reason
|
|
ignore temp5
|
|
# label temp5 "System Temp"
|
|
# ignore temp6
|
|
label temp6 "System Temp"
|
|
|
|
# 6 connected
|
|
label fan1 "fan1"
|
|
label fan2 "fan2"
|
|
label fan3 "fan3"
|
|
label fan4 "fan4"
|
|
label fan5 "fan5"
|
|
# apparently, fan6 is skipped and fan7 is used instead for CPU fan,
|
|
# at least that's how I understand Supermicro data.
|
|
ignore fan6
|
|
label fan7 "CPU fan"
|
|
ignore fan8
|
|
ignore fan9
|
|
ignore fan10
|
|
ignore fan12
|
|
ignore fan12
|
|
# you should ignore the last 3 or 4, in 1U rackmount system
|