mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-29 12:50:43 +00:00
Mark D. Studebaker
3152ddbeee
"Mark M. Hoffman" <mhoffman@lightlink.com> git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1327 7894878c-1315-0410-8ee3-d5d059ff63e0
60 lines
1.6 KiB
Plaintext
60 lines
1.6 KiB
Plaintext
Kernel driver `i2c-sis5595.o'
|
|
|
|
Status: Beta
|
|
|
|
Supported adapters:
|
|
* Silicon Integrated Systems Corp. SiS5595 Southbridge
|
|
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
|
|
|
|
Author: Frodo Looijaard <frodol@dds.nl> and
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
Note: all have mfr. ID 0x1039.
|
|
SUPPORTED PCI ID
|
|
5595 0008
|
|
|
|
Note: The chips below contain a 0008 device which is incompatible with the
|
|
5595. We recognize these by the presence of the listed
|
|
"blacklist" PCI ID and refuse to load.
|
|
|
|
NOT SUPPORTED PCI ID BLACKLIST PCI ID
|
|
540 0008 0540
|
|
550 0008 0550
|
|
5513 0008 5511
|
|
5581 0008 5597
|
|
5582 0008 5597
|
|
5597 0008 5597
|
|
5598 0008 5597/5598
|
|
630 0008 0630
|
|
645 0008 0645
|
|
730 0008 0730
|
|
735 0008 0735
|
|
|
|
Module Parameters
|
|
-----------------
|
|
|
|
force_addr=0xaddr Set the I/O base address. Useful for boards
|
|
that don't set the address in the BIOS. Does not do a
|
|
PCI force; the device must still be present in lspci.
|
|
Don't use this unless the driver complains that the
|
|
base address is not set.
|
|
Example: 'modprobe i2c-sis5595 force_addr=0x290'
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
i2c-sis5595 is a true SMBus host driver for motherboards with the
|
|
SiS5595 southbridges.
|
|
|
|
WARNING: If you are trying to access the integrated sensors on the
|
|
SiS5595 chip, you want the sis5595.o driver for those, not this driver.
|
|
This driver is a BUS driver, not a CHIP driver.
|
|
A BUS driver is used by other CHIP drivers to access chips on the bus.
|
|
|
|
To install this driver, simply do
|
|
# modprobe i2c-sis5595
|
|
|
|
This driver is ALPHA!!!
|
|
Please send feedback to us at sensors@stimpy.netroedge.com.
|