mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-18 11:09:32 +00:00
Jean Delvare
d6294776d4
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2243 7894878c-1315-0410-8ee3-d5d059ff63e0
136 lines
7.3 KiB
Plaintext
136 lines
7.3 KiB
Plaintext
Kernel driver `adm1025.o'
|
|
=========================
|
|
|
|
Status: Complete, known to work but not heavily tested
|
|
|
|
Supported chips:
|
|
* Analog Devices ADM1025
|
|
Prefix `adm1025'
|
|
Addresses scanned: I2C 0x2c - 0x2e (inclusive)
|
|
Datasheet: Publicly available at the Analog Devices website
|
|
* Philips NE1619
|
|
Prefix `ne1619'
|
|
Addresses scanned: I2C 0x2c - 0x2d (inclusive)
|
|
Datasheet: Publicly available at the Philips website
|
|
|
|
The NE1619 presents some differences with the original ADM1025:
|
|
* Only two possible addresses (0x2c - 0x2d).
|
|
* No temperature offset register, but we don't use it anyway.
|
|
* No INT mode for pin 16. We don't play with it anyway.
|
|
|
|
Author: Chen-Yuan Wu <gwu@esoft.com> and Jean Delvare <khali@linux-fr.org>
|
|
|
|
License: GPL
|
|
|
|
|
|
Module Parameters
|
|
-----------------
|
|
|
|
* force: short array (min = 1, max = 48)
|
|
List of adapter,address pairs to boldly assume to be present
|
|
* force_adm1025: short array (min = 1, max = 48)
|
|
List of adapter,address pairs which are unquestionably assumed to contain
|
|
a `adm1025' chip
|
|
* force_ne1619: short array (min = 1, max = 48)
|
|
List of adapter,address pairs which are unquestionably assumed to contain
|
|
a `ne1619' chip
|
|
* probe: short array (min = 1, max = 48)
|
|
List of adapter,address pairs to scan additionally
|
|
* probe_range: short array (min = 1, max = 48)
|
|
List of adapter,start-addr,end-addr triples to scan additionally
|
|
* ignore: short array (min = 1, max = 48)
|
|
List of adapter,address pairs not to scan
|
|
* ignore_range: short array (min = 1, max = 48)
|
|
List of adapter,start-addr,end-addr triples not to scan
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
(This is from Analog Devices.) The ADM1025 is a complete system hardware
|
|
monitor for microprocessor-based systems, providing measurement and limit
|
|
comparison of various system parameters. Five voltage measurement inputs
|
|
are provided, for monitoring +2.5V, +3.3V, +5V and +12V power supplies and
|
|
the processor core voltage. The ADM1025 can monitor a sixth power-supply
|
|
voltage by measuring its own VCC. One input (two pins) is dedicated to a
|
|
remote temperature-sensing diode and an on-chip temperature sensor allows
|
|
ambient temperature to be monitored.
|
|
|
|
One specificity of this chip is that the pin 11 can be hardwired in two
|
|
different manners. It can act as the +12V power-supply voltage analog
|
|
input, or as the a fifth digital entry for the VID reading (bit 4). It's
|
|
kind of strange since both are useful, and the reason for designing the
|
|
chip that way is obscure at least to me. The bit 5 of the configuration
|
|
register can be used to define how the chip is hardwired. Please note
|
|
that it is not a choice you have to make as the user. The choice was
|
|
already made by your motherboard's maker. If the configuration bit isn't
|
|
set properly, you'll have a wrong +12V reading or a wrong VID reading.
|
|
The way the driver handles that is to preserve this bit through the
|
|
initialization process, assuming that the BIOS set it up properly
|
|
beforehand. If it turns out not to be true in some cases, we'll provide
|
|
a module parameter to force modes.
|
|
|
|
|
|
Chip Features
|
|
-------------
|
|
|
|
Chips 'adm1025' and 'ne1619'
|
|
|
|
LABEL LABEL CLASS COMPUTE CLASS MODE MAGN
|
|
in0 - - R- 2
|
|
in1 - - R- 2
|
|
in2 - - R- 2
|
|
in3 - - R- 2
|
|
in4 - - R- 2
|
|
in5 - - R- 2
|
|
in0_min in0 in0 RW 2
|
|
in1_min in1 in1 RW 2
|
|
in2_min in2 in2 RW 2
|
|
in3_min in3 in3 RW 2
|
|
in4_min in4 in4 RW 2
|
|
in5_min in5 in5 RW 2
|
|
in0_max in0 in0 RW 2
|
|
in1_max in1 in1 RW 2
|
|
in2_max in2 in2 RW 2
|
|
in3_max in3 in3 RW 2
|
|
in4_max in4 in4 RW 2
|
|
in5_max in5 in5 RW 2
|
|
temp1 - - R- 1
|
|
temp1_low temp1 temp1 RW 1
|
|
temp1_high temp1 temp1 RW 1
|
|
temp2 - - R- 1
|
|
temp2_low temp2 temp2 RW 1
|
|
temp2_high temp2 temp2 RW 1
|
|
vid - - R- 3
|
|
vrm - - RW 1
|
|
alarms - - R- 0
|
|
|
|
LABEL FEATURE SYMBOL SYSCTL FILE:N
|
|
in0 SENSORS_ADM1025_IN0 in0:3
|
|
in1 SENSORS_ADM1025_IN1 in1:3
|
|
in2 SENSORS_ADM1025_IN2 in2:3
|
|
in3 SENSORS_ADM1025_IN3 in3:3
|
|
in4 SENSORS_ADM1025_IN4 in4:3
|
|
in5 SENSORS_ADM1025_IN5 in5:3
|
|
in0_min SENSORS_ADM1025_IN0_MIN in0:1
|
|
in1_min SENSORS_ADM1025_IN1_MIN in1:1
|
|
in2_min SENSORS_ADM1025_IN2_MIN in2:1
|
|
in3_min SENSORS_ADM1025_IN3_MIN in3:1
|
|
in4_min SENSORS_ADM1025_IN4_MIN in4:1
|
|
in5_min SENSORS_ADM1025_IN5_MIN in5:1
|
|
in0_max SENSORS_ADM1025_IN0_MAX in0:2
|
|
in1_max SENSORS_ADM1025_IN1_MAX in1:2
|
|
in2_max SENSORS_ADM1025_IN2_MAX in2:2
|
|
in3_max SENSORS_ADM1025_IN3_MAX in3:2
|
|
in4_max SENSORS_ADM1025_IN4_MAX in4:2
|
|
in5_max SENSORS_ADM1025_IN5_MAX in5:2
|
|
temp1 SENSORS_ADM1025_TEMP1 temp1:3
|
|
temp1_low SENSORS_ADM1025_TEMP1_LOW temp1:2
|
|
temp1_high SENSORS_ADM1025_TEMP1_HIGH temp1:1
|
|
temp2 SENSORS_ADM1025_TEMP2 temp2:3
|
|
temp2_low SENSORS_ADM1025_TEMP2_LOW temp2:2
|
|
temp2_high SENSORS_ADM1025_TEMP2_HIGH temp2:1
|
|
vid SENSORS_ADM1025_VID vid:1
|
|
vrm SENSORS_ADM1025_VRM vrm:1
|
|
alarms SENSORS_ADM1025_ALARMS alarms:1
|