Files
lm-sensors/doc/chips/w83781d
T

25 lines
679 B
Plaintext

Supports following Winbond chips:
Chip #vin #fanin #pwm #temp wchipid i2c ISA
w83781d 7 3 0 3 0x10 yes yes
w83782d 9 3 2-4 3 0x30 yes yes
w83783s 5-6 3 2 1-2 0x40 yes no
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
To do:
782d/783s PWM enable, clock select, duty cycle
782d beep 3 register
782d programmable pins
783s pin is programmable for -5V or temp1; defaults to -5V,
no control in driver so temp1 doesn't work.
783s temp2 (labeled as temp1 in data sheet) at different location
than 781d/782d, not implemented yet.
w83783s has no in1 for compatibility with the 781d/782d.