mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-01 05:52:41 +07:00
Tele42
7547870646
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
122 lines
3.4 KiB
Plaintext
122 lines
3.4 KiB
Plaintext
# Originally contributed by Gary E. Miller, cleaned up by Jean Delvare.
|
|
|
|
|
|
# /etc/sensors.d/X7DB8
|
|
# settings for the supermicro X7DB8
|
|
# originally written by Gary E. Miller <gem@rellim.com>
|
|
# use at your own risk !
|
|
# Date: 30 May 2012
|
|
|
|
# Here's the info as supplied by Supermicro:
|
|
#
|
|
# Bus Type = SMBus
|
|
# One W83793G
|
|
#
|
|
# Windbond W83793G, Slave Address=0x2f (0x5E in 8-Bit format)
|
|
# =============================================================
|
|
# Fan1 Fan Speed, Offset 0x23, 0x24 RPM = 1350000/Data
|
|
# Fan2 Fan Speed, Offset 0x25, 0x26 RPM = 1350000/Data
|
|
# Fan3 Fan Speed, Offset 0x27, 0x28 RPM = 1350000/Data
|
|
# Fan4 Fan Speed, Offset 0x29, 0x2a RPM = 1350000/Data
|
|
# Fan5 Fan Speed, Offset 0x2b, 0x2c RPM = 1350000/Data
|
|
# Fan6 Fan Speed, Offset 0x2d, 0x2e RPM = 1350000/Data
|
|
# Fan7/CPU1 Fan Speed, Offset 0x2f, 0x30 RPM = 1350000/Data
|
|
# Fan8/CPU2 Fan Speed, Offset 0x31, 0x32 RPM = 1350000/Data
|
|
# CPU1 Core Voltage, Offset 0x10 Voltage = Data* 0.008
|
|
# CPU2 Core Voltage, Offset 0x11 Voltage = Data* 0.008
|
|
# -12V Voltage, Offset 0x14 Voltage = ((Data*0.016)- (2.048*(232./260.)))/(1-(232./260.))
|
|
# +1.5V Voltage, Offset 0x15 Voltage = Data* 0.016
|
|
# +3.3V Voltage, Offset 0x16 Voltage = Data* 0.016
|
|
# +12V Voltage, Offset 0x17 Voltage = Data* 0.008/ (10./120.)
|
|
# +5V Voltage, Offset 0x18 Voltage = Data* 0.024
|
|
# 5Vsb Voltage, Offset 0x19 Voltage = Data* 0.024
|
|
# Battery Voltage, Offset 0x1a Voltage = Data* 0.016
|
|
# CPU1 CoreA (PECI Agent1) Temperature, Offset 0x1c Temperature = Data
|
|
# CPU1 CoreB (PECI Agent2) Temperature, Offset 0x1d Temperature = Data
|
|
# CPU2 CoreA (PECI Agent3) Temperature, Offset 0x1e Temperature = Data
|
|
# CPU2 CoreB (PECI Agent4) Temperature, Offset 0x1f Temperature = Data
|
|
# System Temperature, Offset 0x20 Temperature = Data
|
|
# Chassis Intrusion, Offset 0x44, BitMask 0x40 1 = Bad, 0 = Good
|
|
#
|
|
#
|
|
# Windbond W83627HF
|
|
# =============================================================
|
|
# Power Supply Failure, GP11(From W83627HF) 1 = Good, 0 = Bad
|
|
#
|
|
|
|
chip "w83627hf-isa-0290"
|
|
# no driver access to GP11, so I turned off everything.
|
|
ignore in0
|
|
ignore in1
|
|
ignore in2
|
|
ignore in3
|
|
ignore in4
|
|
ignore in5
|
|
ignore in6
|
|
ignore in7
|
|
ignore in8
|
|
ignore cpu0_vid
|
|
ignore fan1
|
|
ignore fan2
|
|
ignore fan3
|
|
ignore temp1
|
|
ignore temp2
|
|
ignore temp3
|
|
|
|
|
|
|
|
bus "i2c-0" "SMBus I801 adapter at 1100"
|
|
|
|
chip "w83793-i2c-0-2f"
|
|
|
|
label fan7 "CPU1 Fan"
|
|
label fan8 "CPU2 Fan"
|
|
|
|
# Voltages ; note that in the table above, the .008, .016, and .024 factors are
|
|
# already computed in the driver...
|
|
label in0 "Vcore1"
|
|
label in1 "Vcore2"
|
|
ignore in2
|
|
label in3 "-12V"
|
|
label in4 "+1.5V"
|
|
label in5 "+3.3V"
|
|
label in6 "+12V"
|
|
label in7 "+5V"
|
|
label in8 "5Vsb"
|
|
label in9 "Vbat"
|
|
|
|
label temp1 "CPU1 CoreA"
|
|
label temp2 "CPU1 CoreB"
|
|
label temp3 "CPU2 CoreA"
|
|
label temp4 "CPU2 CoreB"
|
|
label temp5 "M/B Temp"
|
|
|
|
compute in3 (@ - (2.048*(232/260)))/(1-(232/260)), (@*(1-(232/260)))+(2.048*(232/260))
|
|
compute in6 @ * 12 , @ / 12
|
|
|
|
|
|
# CPUs
|
|
set in0_min 0.82
|
|
set in0_max 1.35
|
|
set in1_min 0.82
|
|
set in1_max 1.35
|
|
|
|
# -12V, 10%
|
|
set in3_max -12.0 * 0.90
|
|
set in3_min -12.0 * 1.10
|
|
# +3.3V, 5%
|
|
set in5_min 3.3 * 0.95
|
|
set in5_max 3.3 * 1.05
|
|
# +12V, 5%
|
|
set in6_min 12.0 * 0.95
|
|
set in6_max 12.0 * 1.05
|
|
# +5V, 5%
|
|
set in7_min 5.0 * 0.95
|
|
set in7_max 5.0 * 1.05
|
|
# 5Vsb, 10%
|
|
set in8_min 5.0 * 0.90
|
|
set in8_max 5.0 * 1.10
|
|
# Vbat, 10%
|
|
set in9_min 3.0 * 0.90
|
|
set in9_max 3.0 * 1.10
|