wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-15 10:39:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
77dd1086a881434fabf01e7cd84df4e2afede12e
lm-sensors/kernel/chips/fscscy.c
T
Jean Delvare 239b3d0344 Backport memory allocation reworking from Linux 2.6. 
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2445 7894878c-1315-0410-8ee3-d5d059ff63e0
2004-04-17 17:20:01 +00:00

915 lines
34 KiB
C
Raw Blame History

/*
fscscy.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
fujitsu siemens scylla chip,
module based on lm80.c, fscpos.c
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
and Philip Edelbrock <phil@netroedge.com>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include "version.h"
MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x73, SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(fscscy);
/* The FSCSCY registers */
/* chip identification */
#define FSCSCY_REG_IDENT_0 0x00
#define FSCSCY_REG_IDENT_1 0x01
#define FSCSCY_REG_IDENT_2 0x02
#define FSCSCY_REG_REVISION 0x03
/* global control and status */
#define FSCSCY_REG_EVENT_STATE 0x04
#define FSCSCY_REG_CONTROL 0x05
/* watchdog */
#define FSCSCY_REG_WDOG_PRESET 0x28
#define FSCSCY_REG_WDOG_STATE 0x23
#define FSCSCY_REG_WDOG_CONTROL 0x21
/*
** Fan definitions
**
** _RPMMIN: Minimum speed. Can be set via interface, but only for three of the fans
** FAN1_RPMMIN is wired to Fan 0 (CPU Fans)
** FAN4_RPMMIN is wired to Fan 2 (PS Fans ??)
** FAN5_RPMMIN is wired to Fan 3 (AUX Fans ??)
** _ACT: Actual Fan Speed
** _STATE: Fan status register
** _RIPPLE: Fan speed multiplier
*/
/* fan 0 */
#define FSCSCY_REG_FAN0_RPMMIN 0x65
#define FSCSCY_REG_FAN0_ACT 0x6b
#define FSCSCY_REG_FAN0_STATE 0x62
#define FSCSCY_REG_FAN0_RIPPLE 0x6f
/* fan 1 */
#define FSCSCY_REG_FAN1_RPMMIN FSCSCY_REG_FAN0_RPMMIN
#define FSCSCY_REG_FAN1_ACT 0x6c
#define FSCSCY_REG_FAN1_STATE 0x61
#define FSCSCY_REG_FAN1_RIPPLE 0x6f
/* fan 2 */
#define FSCSCY_REG_FAN2_RPMMIN 0x55
#define FSCSCY_REG_FAN2_ACT 0x0e
#define FSCSCY_REG_FAN2_STATE 0x0d
#define FSCSCY_REG_FAN2_RIPPLE 0x0f
/* fan 3 */
#define FSCSCY_REG_FAN3_RPMMIN 0xa5
#define FSCSCY_REG_FAN3_ACT 0xab
#define FSCSCY_REG_FAN3_STATE 0xa2
#define FSCSCY_REG_FAN3_RIPPLE 0xaf
/* fan 4 */
#define FSCSCY_REG_FAN4_RPMMIN FSCSCY_REG_FAN2_RPMMIN
#define FSCSCY_REG_FAN4_ACT 0x5c
#define FSCSCY_REG_FAN4_STATE 0x52
#define FSCSCY_REG_FAN4_RIPPLE 0x0f
/* fan 5 */
#define FSCSCY_REG_FAN5_RPMMIN FSCSCY_REG_FAN3_RPMMIN
#define FSCSCY_REG_FAN5_ACT 0xbb
#define FSCSCY_REG_FAN5_STATE 0xb2
#define FSCSCY_REG_FAN5_RIPPLE 0xbf
/* voltage supervision */
#define FSCSCY_REG_VOLT_12 0x45
#define FSCSCY_REG_VOLT_5 0x42
#define FSCSCY_REG_VOLT_BATT 0x48
/* temperatures */
/* sensor 0 */
#define FSCSCY_REG_TEMP0_ACT 0x64
#define FSCSCY_REG_TEMP0_STATE 0x71
#define FSCSCY_REG_TEMP0_LIM 0x76
/* sensor 1 */
#define FSCSCY_REG_TEMP1_ACT 0xD0
#define FSCSCY_REG_TEMP1_STATE 0xD1
#define FSCSCY_REG_TEMP1_LIM 0xD6
/* sensor 2 */
#define FSCSCY_REG_TEMP2_ACT 0x32
#define FSCSCY_REG_TEMP2_STATE 0x81
#define FSCSCY_REG_TEMP2_LIM 0x86
/* sensor3 */
#define FSCSCY_REG_TEMP3_ACT 0x35
#define FSCSCY_REG_TEMP3_STATE 0x91
#define FSCSCY_REG_TEMP3_LIM 0x96
/* PCI Load */
#define FSCSCY_REG_PCILOAD 0x1a
/* Intrusion Sensor */
#define FSCSCY_REG_INTR_STATE 0x13
#define FSCSCY_REG_INTR_CTRL 0x12
/* Conversions. Rounding and limit checking is only done on the TO_REG
variants. Note that you should be a bit careful with which arguments
these macros are called: arguments may be evaluated more than once.
Fixing this is just not worth it. */
#define IN_TO_REG(val,nr) (SENSORS_LIMIT((val),0,255))
#define IN_FROM_REG(val,nr) (val)
/* Initial limits */
/* For each registered FSCSCY, we need to keep some data in memory. That
data is pointed to by fscscy_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new fscscy client is
allocated. */
struct fscscy_data {
struct i2c_client client;
int sysctl_id;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 revision; /* revision of chip */
u8 global_event; /* global event status */
u8 global_control; /* global control register */
u8 watchdog[3]; /* watchdog */
u8 volt[3]; /* 12, 5, battery current */
u8 volt_min[3]; /* minimum voltages over module "lifetime" */
u8 volt_max[3]; /* maximum voltages over module "lifetime" */
u8 temp_act[4]; /* temperature */
u8 temp_status[4]; /* status of temp. sensor */
u8 temp_lim[4]; /* limit temperature of temp. sensor */
u8 temp_min[4]; /* minimum of temp. sensor, this is just calculated by the module */
u8 temp_max[4]; /* maximum of temp. sensor, this is just calculsted by the module */
u8 fan_act[6]; /* fans revolutions per second */
u8 fan_status[6]; /* fan status */
u8 fan_rpmmin[6]; /* fan min value for rps */
u8 fan_ripple[6]; /* divider for rps */
u8 fan_min[6]; /* minimum RPM over module "lifetime" */
u8 fan_max[6]; /* maximum RPM over module "lifetime" */
u8 pciload; /* PCILoad value */
u8 intr_status; /* Intrusion Status */
u8 intr_control; /* Intrusion Control */
};
static int fscscy_attach_adapter(struct i2c_adapter *adapter);
static int fscscy_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int fscscy_detach_client(struct i2c_client *client);
static int fscscy_read_value(struct i2c_client *client, u8 register);
static int fscscy_write_value(struct i2c_client *client, u8 register,
u8 value);
static void fscscy_update_client(struct i2c_client *client);
static void fscscy_init_client(struct i2c_client *client);
static void fscscy_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void fscscy_fan(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_fan_internal(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results,
int nr, int reg_state, int reg_min, int res_ripple);
static void fscscy_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_volt(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_wdog(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_pciload(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscscy_intrusion(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static int fscscy_id = 0;
static struct i2c_driver fscscy_driver = {
.owner = THIS_MODULE,
.name = "FSCSCY sensor driver",
.id = I2C_DRIVERID_FSCSCY,
.flags = I2C_DF_NOTIFY,
.attach_adapter = fscscy_attach_adapter,
.detach_client = fscscy_detach_client,
};
/* The /proc/sys entries */
/* -- SENSORS SYSCTL START -- */
#define FSCSCY_SYSCTL_VOLT0 1000 /* 12 volt supply */
#define FSCSCY_SYSCTL_VOLT1 1001 /* 5 volt supply */
#define FSCSCY_SYSCTL_VOLT2 1002 /* batterie voltage*/
#define FSCSCY_SYSCTL_FAN0 1101 /* state, min, ripple, actual value fan 0 */
#define FSCSCY_SYSCTL_FAN1 1102 /* state, min, ripple, actual value fan 1 */
#define FSCSCY_SYSCTL_FAN2 1103 /* state, min, ripple, actual value fan 2 */
#define FSCSCY_SYSCTL_FAN3 1104 /* state, min, ripple, actual value fan 3 */
#define FSCSCY_SYSCTL_FAN4 1105 /* state, min, ripple, actual value fan 4 */
#define FSCSCY_SYSCTL_FAN5 1106 /* state, min, ripple, actual value fan 5 */
#define FSCSCY_SYSCTL_TEMP0 1201 /* state and value of sensor 0, cpu die */
#define FSCSCY_SYSCTL_TEMP1 1202 /* state and value of sensor 1, motherboard */
#define FSCSCY_SYSCTL_TEMP2 1203 /* state and value of sensor 2, chassis */
#define FSCSCY_SYSCTL_TEMP3 1204 /* state and value of sensor 3, chassis */
#define FSCSCY_SYSCTL_REV 2000 /* Revision */
#define FSCSCY_SYSCTL_EVENT 2001 /* global event status */
#define FSCSCY_SYSCTL_CONTROL 2002 /* global control byte */
#define FSCSCY_SYSCTL_WDOG 2003 /* state, min, ripple, actual value fan 2 */
#define FSCSCY_SYSCTL_PCILOAD 2004 /* PCILoad value */
#define FSCSCY_SYSCTL_INTRUSION 2005 /* state, control for intrusion sensor */
/* -- SENSORS SYSCTL END -- */
/* These files are created for each detected FSCSCY. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table fscscy_dir_table_template[] = {
{FSCSCY_SYSCTL_REV, "rev", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_in},
{FSCSCY_SYSCTL_EVENT, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_in},
{FSCSCY_SYSCTL_CONTROL, "control", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_in},
{FSCSCY_SYSCTL_TEMP0, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_TEMP1, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_TEMP2, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_TEMP3, "temp4", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_temp},
{FSCSCY_SYSCTL_VOLT0, "in0", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_volt},
{FSCSCY_SYSCTL_VOLT1, "in1", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_volt},
{FSCSCY_SYSCTL_VOLT2, "in2", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_volt},
{FSCSCY_SYSCTL_FAN0, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN1, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN2, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN3, "fan4", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN4, "fan5", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_FAN5, "fan6", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_fan},
{FSCSCY_SYSCTL_WDOG, "wdog", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_wdog},
{FSCSCY_SYSCTL_PCILOAD, "pciload", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_pciload},
{FSCSCY_SYSCTL_INTRUSION, "intrusion", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscscy_intrusion},
{0}
};
static int fscscy_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, fscscy_detect);
}
int fscscy_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int i;
struct i2c_client *new_client;
struct fscscy_data *data;
int err = 0;
const char *type_name, *client_name;
/* Make sure we aren't probing the ISA bus!! This is just a safety check
at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
if (i2c_is_isa_adapter(adapter)) {
printk
("fscscy.o: fscscy_detect called for an ISA bus adapter?!?\n");
return 0;
}
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto ERROR0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access fscscy_{read,write}_value. */
if (!(data = kmalloc(sizeof(struct fscscy_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
new_client = &data->client;
new_client->addr = address;
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &fscscy_driver;
new_client->flags = 0;
/* Do the remaining detection unless force or force_fscscy parameter */
if (kind < 0) {
if (fscscy_read_value(new_client, FSCSCY_REG_IDENT_0) != 0x53)
goto ERROR1;
if (fscscy_read_value(new_client, FSCSCY_REG_IDENT_1) != 0x43)
goto ERROR1;
if (fscscy_read_value(new_client, FSCSCY_REG_IDENT_2) != 0x59)
goto ERROR1;
}
kind = fscscy;
type_name = "fscscy";
client_name = "fsc scylla chip";
/* Fill in the remaining client fields and put it into the global list */
strcpy(new_client->name, client_name);
new_client->id = fscscy_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((i = i2c_register_entry(new_client, type_name,
fscscy_dir_table_template)) < 0) {
err = i;
goto ERROR4;
}
data->sysctl_id = i;
fscscy_init_client(new_client);
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
i2c_detach_client(new_client);
ERROR3:
ERROR1:
kfree(data);
ERROR0:
return err;
}
static int fscscy_detach_client(struct i2c_client *client)
{
int err;
i2c_deregister_entry(((struct fscscy_data *) (client->data))->
sysctl_id);
if ((err = i2c_detach_client(client))) {
printk
("fscscy.o: Client deregistration failed, client not detached.\n");
return err;
}
kfree(client->data);
return 0;
}
static int fscscy_read_value(struct i2c_client *client, u8 reg)
{
#ifdef DEBUG
printk("fscscy: read reg 0x%02x\n",reg);
#endif
return i2c_smbus_read_byte_data(client, reg);
}
static int fscscy_write_value(struct i2c_client *client, u8 reg, u8 value)
{
#ifdef DEBUG
printk("fscscy: write reg 0x%02x, val 0x%02x\n",reg, value);
#endif
return i2c_smbus_write_byte_data(client, reg, value);
}
/* Called when we have found a new FSCSCY. It should set limits, etc. */
static void fscscy_init_client(struct i2c_client *client)
{
struct fscscy_data *data = client->data;
/* read revision from chip */
data->revision = fscscy_read_value(client,FSCSCY_REG_REVISION);
/* Initialize min/max values from chip */
data->fan_min[0] = data->fan_max[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_ACT);
data->fan_min[1] = data->fan_max[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_ACT);
data->fan_min[2] = data->fan_max[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_ACT);
data->fan_min[3] = data->fan_max[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_ACT);
data->fan_min[4] = data->fan_max[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_ACT);
data->fan_min[4] = data->fan_max[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_ACT);
data->temp_min[0] = data->temp_max[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_ACT);
data->temp_min[1] = data->temp_max[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_ACT);
data->temp_min[2] = data->temp_max[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_ACT);
data->temp_min[3] = data->temp_max[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_ACT);
data->volt_min[0] = data->volt_max[0] = fscscy_read_value(client, FSCSCY_REG_VOLT_12);
data->volt_min[1] = data->volt_max[1] = fscscy_read_value(client, FSCSCY_REG_VOLT_5);
data->volt_min[2] = data->volt_max[2] = fscscy_read_value(client, FSCSCY_REG_VOLT_BATT);
}
static void fscscy_update_client(struct i2c_client *client)
{
struct fscscy_data *data = client->data;
down(&data->update_lock);
if ((jiffies - data->last_updated > 2 * HZ) ||
(jiffies < data->last_updated) || !data->valid) {
#ifdef DEBUG
printk("Starting fscscy update\n");
#endif
data->temp_act[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_ACT);
if (data->temp_min[0] > data->temp_act[0]) data->temp_min[0] = data->temp_act[0];
if (data->temp_max[0] < data->temp_act[0]) data->temp_max[0] = data->temp_act[0];
data->temp_act[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_ACT);
if (data->temp_min[1] > data->temp_act[1]) data->temp_min[1] = data->temp_act[1];
if (data->temp_max[1] < data->temp_act[1]) data->temp_max[1] = data->temp_act[1];
data->temp_act[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_ACT);
if (data->temp_min[2] > data->temp_act[2]) data->temp_min[2] = data->temp_act[2];
if (data->temp_max[2] < data->temp_act[2]) data->temp_max[2] = data->temp_act[2];
data->temp_act[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_ACT);
if (data->temp_min[3] > data->temp_act[3]) data->temp_min[3] = data->temp_act[3];
if (data->temp_max[3] < data->temp_act[3]) data->temp_max[3] = data->temp_act[3];
data->temp_status[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_STATE);
data->temp_status[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_STATE);
data->temp_status[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_STATE);
data->temp_status[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_STATE);
data->temp_lim[0] = fscscy_read_value(client, FSCSCY_REG_TEMP0_LIM);
data->temp_lim[1] = fscscy_read_value(client, FSCSCY_REG_TEMP1_LIM);
data->temp_lim[2] = fscscy_read_value(client, FSCSCY_REG_TEMP2_LIM);
data->temp_lim[3] = fscscy_read_value(client, FSCSCY_REG_TEMP3_LIM);
data->volt[0] = fscscy_read_value(client, FSCSCY_REG_VOLT_12);
if (data->volt_min[0] > data->volt[0]) data->volt_min[0] = data->volt[0];
if (data->volt_max[0] < data->volt[0]) data->volt_max[0] = data->volt[0];
data->volt[1] = fscscy_read_value(client, FSCSCY_REG_VOLT_5);
if (data->volt_min[1] > data->volt[1]) data->volt_min[1] = data->volt[1];
if (data->volt_max[1] < data->volt[1]) data->volt_max[1] = data->volt[1];
data->volt[2] = fscscy_read_value(client, FSCSCY_REG_VOLT_BATT);
if (data->volt_min[2] > data->volt[2]) data->volt_min[2] = data->volt[2];
if (data->volt_max[2] < data->volt[2]) data->volt_max[2] = data->volt[2];
data->fan_act[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_ACT);
if (data->fan_min[0] > data->fan_act[0]) data->fan_min[0] = data->fan_act[0];
if (data->fan_max[0] < data->fan_act[0]) data->fan_max[0] = data->fan_act[0];
data->fan_act[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_ACT);
if (data->fan_min[1] > data->fan_act[1]) data->fan_min[1] = data->fan_act[1];
if (data->fan_max[1] < data->fan_act[1]) data->fan_max[1] = data->fan_act[1];
data->fan_act[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_ACT);
if (data->fan_min[2] > data->fan_act[2]) data->fan_min[2] = data->fan_act[2];
if (data->fan_max[2] < data->fan_act[2]) data->fan_max[2] = data->fan_act[2];
data->fan_act[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_ACT);
if (data->fan_min[3] > data->fan_act[3]) data->fan_min[3] = data->fan_act[3];
if (data->fan_max[3] < data->fan_act[3]) data->fan_max[3] = data->fan_act[3];
data->fan_act[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_ACT);
if (data->fan_min[4] > data->fan_act[4]) data->fan_min[4] = data->fan_act[4];
if (data->fan_max[4] < data->fan_act[4]) data->fan_max[4] = data->fan_act[4];
data->fan_act[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_ACT);
if (data->fan_min[5] > data->fan_act[5]) data->fan_min[5] = data->fan_act[5];
if (data->fan_max[5] < data->fan_act[5]) data->fan_max[5] = data->fan_act[5];
data->fan_status[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_STATE);
data->fan_status[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_STATE);
data->fan_status[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_STATE);
data->fan_status[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_STATE);
data->fan_status[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_STATE);
data->fan_status[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_STATE);
data->fan_rpmmin[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_RPMMIN);
data->fan_rpmmin[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_RPMMIN);
data->fan_rpmmin[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_RPMMIN);
data->fan_rpmmin[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_RPMMIN);
data->fan_rpmmin[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_RPMMIN);
data->fan_rpmmin[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_RPMMIN);
data->fan_ripple[0] = fscscy_read_value(client, FSCSCY_REG_FAN0_RIPPLE);
data->fan_ripple[1] = fscscy_read_value(client, FSCSCY_REG_FAN1_RIPPLE);
data->fan_ripple[2] = fscscy_read_value(client, FSCSCY_REG_FAN2_RIPPLE);
data->fan_ripple[3] = fscscy_read_value(client, FSCSCY_REG_FAN3_RIPPLE);
data->fan_ripple[4] = fscscy_read_value(client, FSCSCY_REG_FAN4_RIPPLE);
data->fan_ripple[5] = fscscy_read_value(client, FSCSCY_REG_FAN5_RIPPLE);
data->watchdog[0] = fscscy_read_value(client, FSCSCY_REG_WDOG_PRESET);
data->watchdog[1] = fscscy_read_value(client, FSCSCY_REG_WDOG_STATE);
data->watchdog[2] = fscscy_read_value(client, FSCSCY_REG_WDOG_CONTROL);
data->global_event = fscscy_read_value(client, FSCSCY_REG_EVENT_STATE);
data->global_control = fscscy_read_value(client, FSCSCY_REG_CONTROL);
data->pciload = fscscy_read_value(client, FSCSCY_REG_PCILOAD);
data->intr_status = fscscy_read_value(client, FSCSCY_REG_INTR_STATE);
data->intr_control = fscscy_read_value(client, FSCSCY_REG_INTR_CTRL);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void fscscy_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
switch(ctl_name) {
case FSCSCY_SYSCTL_REV:
results[0] = data->revision ;
break;
case FSCSCY_SYSCTL_EVENT:
results[0] = data->global_event & 0x9f; /* MKN */
break;
case FSCSCY_SYSCTL_CONTROL:
results[0] = data->global_control & 0x19; /* MKN */
break;
default:
printk("fscscy: ctl_name %d not supported\n",
ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if((ctl_name == FSCSCY_SYSCTL_CONTROL) && (*nrels_mag >= 1)) {
data->global_control = (data->global_control & 0x18) | (results[0] & 0x01); /* MKN */
printk("fscscy: writing 0x%02x to global_control\n",
data->global_control);
fscscy_write_value(client,FSCSCY_REG_CONTROL,
data->global_control);
}
else
printk("fscscy: writing to chip not supported\n");
}
}
#define TEMP_FROM_REG(val) (val-128)
void fscscy_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
switch(ctl_name) {
case FSCSCY_SYSCTL_TEMP0:
results[0] = data->temp_status[0] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[0]);
results[2] = TEMP_FROM_REG(data->temp_lim[0]);
results[3] = TEMP_FROM_REG(data->temp_min[0]);
results[4] = TEMP_FROM_REG(data->temp_max[0]);
break;
case FSCSCY_SYSCTL_TEMP1:
results[0] = data->temp_status[1] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[1]);
results[2] = TEMP_FROM_REG(data->temp_lim[1]);
results[3] = TEMP_FROM_REG(data->temp_min[1]);
results[4] = TEMP_FROM_REG(data->temp_max[1]);
break;
case FSCSCY_SYSCTL_TEMP2:
results[0] = data->temp_status[2] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[2]);
results[2] = TEMP_FROM_REG(data->temp_lim[2]);
results[3] = TEMP_FROM_REG(data->temp_min[2]);
results[4] = TEMP_FROM_REG(data->temp_max[2]);
break;
case FSCSCY_SYSCTL_TEMP3:
results[0] = data->temp_status[3] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[3]);
results[2] = TEMP_FROM_REG(data->temp_lim[3]);
results[3] = TEMP_FROM_REG(data->temp_min[3]);
results[4] = TEMP_FROM_REG(data->temp_max[3]);
break;
default:
printk("fscscy: ctl_name %d not supported\n",
ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 5;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
switch(ctl_name) {
case FSCSCY_SYSCTL_TEMP0:
data->temp_status[0] =
(data->temp_status[0] & ~0x02)
| (results[0] & 0x02);
printk("fscscy: writing value 0x%02x "
"to temp0_status\n",
data->temp_status[0]);
fscscy_write_value(client,
FSCSCY_REG_TEMP0_STATE,
data->temp_status[0] & 0x02);
break;
case FSCSCY_SYSCTL_TEMP1:
data->temp_status[1] = (data->temp_status[1] & ~0x02) | (results[0] & 0x02);
printk("fscscy: writing value 0x%02x to temp1_status\n", data->temp_status[1]);
fscscy_write_value(client,FSCSCY_REG_TEMP1_STATE,
data->temp_status[1] & 0x02);
break;
case FSCSCY_SYSCTL_TEMP2:
data->temp_status[2] = (data->temp_status[2] & ~0x02) | (results[0] & 0x02);
printk("fscscy: writing value 0x%02x to temp2_status\n", data->temp_status[2]);
fscscy_write_value(client,FSCSCY_REG_TEMP2_STATE,
data->temp_status[2] & 0x02);
break;
case FSCSCY_SYSCTL_TEMP3:
data->temp_status[3] = (data->temp_status[3] & ~0x02) | (results[0] & 0x02);
printk("fscscy: writing value 0x%02x to temp3_status\n", data->temp_status[3]);
fscscy_write_value(client,FSCSCY_REG_TEMP3_STATE,
data->temp_status[3] & 0x02);
break;
default:
printk("fscscy: ctl_name %d not supported\n",ctl_name);
}
}
else
printk("fscscy: writing to chip not supported\n");
}
}
#define VOLT_FROM_REG(val,mult) (val*mult/255)
void fscscy_volt(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
switch(ctl_name) {
case FSCSCY_SYSCTL_VOLT0:
results[0] = VOLT_FROM_REG(data->volt[0],1420);
results[1] = VOLT_FROM_REG(data->volt_min[0],1420);
results[2] = VOLT_FROM_REG(data->volt_max[0],1420);
break;
case FSCSCY_SYSCTL_VOLT1:
results[0] = VOLT_FROM_REG(data->volt[1],660);
results[1] = VOLT_FROM_REG(data->volt_min[1],660);
results[2] = VOLT_FROM_REG(data->volt_max[1],660);
break;
case FSCSCY_SYSCTL_VOLT2:
results[0] = VOLT_FROM_REG(data->volt[2],330);
results[1] = VOLT_FROM_REG(data->volt_min[2],330);
results[2] = VOLT_FROM_REG(data->volt_max[2],330);
break;
default:
printk("fscscy: ctl_name %d not supported\n",
ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
printk("fscscy: writing to chip not supported\n");
}
}
void fscscy_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
switch(ctl_name) {
case FSCSCY_SYSCTL_FAN0:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
0,FSCSCY_REG_FAN0_STATE,FSCSCY_REG_FAN0_RPMMIN,
FSCSCY_REG_FAN0_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN1:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
1,FSCSCY_REG_FAN1_STATE,FSCSCY_REG_FAN1_RPMMIN,
FSCSCY_REG_FAN1_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN2:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
2,FSCSCY_REG_FAN2_STATE,FSCSCY_REG_FAN2_RPMMIN,
FSCSCY_REG_FAN2_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN3:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
3,FSCSCY_REG_FAN3_STATE,FSCSCY_REG_FAN3_RPMMIN,
FSCSCY_REG_FAN3_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN4:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
4,FSCSCY_REG_FAN4_STATE,FSCSCY_REG_FAN4_RPMMIN,
FSCSCY_REG_FAN4_RIPPLE);
break;
case FSCSCY_SYSCTL_FAN5:
fscscy_fan_internal(client,operation,ctl_name,nrels_mag,results,
5,FSCSCY_REG_FAN5_STATE,FSCSCY_REG_FAN5_RPMMIN,
FSCSCY_REG_FAN5_RIPPLE);
break;
default:
printk("fscscy: illegal fan nr %d\n",ctl_name);
}
}
#define RPM_FROM_REG(val) (val*60)
void fscscy_fan_internal(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results, int nr,
int reg_state, int reg_min, int reg_ripple )
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->fan_status[nr] & 0x0f; /* MKN */
results[1] = data->fan_rpmmin[nr];
results[2] = data->fan_ripple[nr] & 0x03;
results[3] = RPM_FROM_REG(data->fan_act[nr]);
results[4] = RPM_FROM_REG(data->fan_min[nr]);
results[5] = RPM_FROM_REG(data->fan_max[nr]);
*nrels_mag = 6;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
data->fan_status[nr] = (data->fan_status[nr] & 0x0b) | (results[0] & 0x04); /* MKN */
printk("fscscy: writing value 0x%02x to fan%d_status\n",
data->fan_status[nr],nr);
fscscy_write_value(client,reg_state,
data->fan_status[nr]);
}
if(*nrels_mag >= 2) {
if((results[1] & 0xff) == 0) {
printk("fscscy: fan%d rpmmin 0 not allowed for safety reasons\n",nr);
return;
}
data->fan_rpmmin[nr] = results[1];
printk("fscscy: writing value 0x%02x to fan%d_min\n",
data->fan_rpmmin[nr],nr);
fscscy_write_value(client,reg_min,
data->fan_rpmmin[nr]);
}
if(*nrels_mag >= 3) {
if((results[2] & 0x03) == 0) {
printk("fscscy: fan%d ripple 0 is nonsense/not allowed\n",nr);
return;
}
data->fan_ripple[nr] = results[2] & 0x03;
printk("fscscy: writing value 0x%02x to fan%d_ripple\n",
data->fan_ripple[nr],nr);
fscscy_write_value(client,reg_ripple,
data->fan_ripple[nr]);
}
}
}
void fscscy_wdog(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->watchdog[0] ;
results[1] = data->watchdog[1] & 0x02;
results[2] = data->watchdog[2] & 0xb0;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->watchdog[0] = results[0] & 0xff;
printk("fscscy: writing value 0x%02x to wdog_preset\n",
data->watchdog[0]);
fscscy_write_value(client,FSCSCY_REG_WDOG_PRESET,
data->watchdog[0]);
}
if (*nrels_mag >= 2) {
data->watchdog[1] = results[1] & 0x02;
printk("fscscy: writing value 0x%02x to wdog_state\n",
data->watchdog[1]);
fscscy_write_value(client,FSCSCY_REG_WDOG_STATE,
data->watchdog[1]);
}
if (*nrels_mag >= 3) {
data->watchdog[2] = results[2] & 0xb0;
printk("fscscy: writing value 0x%02x to wdog_control\n",
data->watchdog[2]);
fscscy_write_value(client,FSCSCY_REG_WDOG_CONTROL,
data->watchdog[2]);
}
}
}
void fscscy_pciload(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->pciload;
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
printk("fscscy: writing PCILOAD to chip not supported\n");
}
}
void fscscy_intrusion(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscscy_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscscy_update_client(client);
results[0] = data->intr_control & 0x80;
results[1] = data->intr_status & 0xc0;
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->intr_control = results[0] & 0x80;
printk("fscscy: writing value 0x%02x to intr_control\n",
data->intr_control);
fscscy_write_value(client,FSCSCY_REG_INTR_CTRL,
data->intr_control);
}
}
}
static int __init sm_fscscy_init(void)
{
printk("fscscy.o version %s (%s)\n", LM_VERSION, LM_DATE);
return i2c_add_driver(&fscscy_driver);
}
static void __exit sm_fscscy_exit(void)
{
i2c_del_driver(&fscscy_driver);
}
MODULE_AUTHOR
("Martin Knoblauch <mkn@teraport.de> based on work (fscpos) from Hermann Jung <hej@odn.de>");
MODULE_DESCRIPTION("fujitsu siemens scylla chip driver");
module_init(sm_fscscy_init);
module_exit(sm_fscscy_exit);
Reference in new issue View Git Blame Copy Permalink