lm-sensors/kernel/chips/icspll.c

/*
    icspll.c - Part of lm_sensors, Linux kernel modules for hardware
               monitoring
    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
    Philip Edelbrock <phil@netroedge.com>,
    and Mark Studebaker <mdsxyz123@yahoo.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

/*
    ** WARNING  **
    Supports limited combinations of clock chips and busses.
    Clock chip must be at address 0x69
    This driver may crash your system.
    See doc/chips/icspll for details.
*/


#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include "version.h"

MODULE_LICENSE("GPL");

/* Addresses to scan */
#define ADDRESS 0x69
static unsigned short normal_i2c[] = { ADDRESS, SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };

/* Insmod parameters */
SENSORS_INSMOD_1(icspll);

#define ICSPLL_SIZE 7
#define MAXBLOCK_SIZE 32

/* Each client has this additional data */
struct icspll_data {
	struct i2c_client client;
	int sysctl_id;
	struct semaphore update_lock;
	char valid;		/* !=0 if following fields are valid */
	unsigned long last_updated;	/* In jiffies */
	u8 data[ICSPLL_SIZE];	/* Register values */
	int memtype;
};

static int icspll_attach_adapter(struct i2c_adapter *adapter);
static int icspll_detach_client(struct i2c_client *client);
static int icspll_detect(struct i2c_adapter *adapter, int address,
		       unsigned short flags, int kind);

#if 0
static int icspll_write_value(struct i2c_client *client, u8 reg,
			      u16 value);
#endif

static void icspll_contents(struct i2c_client *client, int operation,
			    int ctl_name, int *nrels_mag, long *results);
static void icspll_update_client(struct i2c_client *client);


/* This is the driver that will be inserted */
static struct i2c_driver icspll_driver = {
	.owner		= THIS_MODULE,
	.name		= "Clock chip reader",
	.id		= I2C_DRIVERID_ICSPLL,
	.flags		= I2C_DF_NOTIFY,
	.attach_adapter	= icspll_attach_adapter,
	.detach_client	= icspll_detach_client,
};

/* -- SENSORS SYSCTL START -- */
#define ICSPLL_SYSCTL1 1000
/* -- SENSORS SYSCTL END -- */

/* These files are created for each detected ICSPLL. This is just a template;
   though at first sight, you might think we could use a statically
   allocated list, we need some way to get back to the parent - which
   is done through one of the 'extra' fields which are initialized
   when a new copy is allocated. */
static ctl_table icspll_dir_table_template[] = {
	{ICSPLL_SYSCTL1, "reg0-6", NULL, 0, 0444, NULL, &i2c_proc_real,
	 &i2c_sysctl_real, NULL, &icspll_contents},
	{0}
};

/* holding place for data - block read could be as much as 32 */
static u8 tempdata[MAXBLOCK_SIZE];

static int icspll_id = 0;
static int icspll_attach_adapter(struct i2c_adapter *adapter)
{
	return i2c_detect(adapter, &addr_data, icspll_detect);
}

/* This function is called by i2c_detect */
int icspll_detect(struct i2c_adapter *adapter, int address,
   	          unsigned short flags, int kind)
{
	int err, i;
	struct i2c_client *new_client;
	struct icspll_data *data;

	err = 0;
	/* Make sure we aren't probing the ISA bus!! */
	if (i2c_is_isa_adapter(adapter))
		return 0;

	if (address != ADDRESS)
		return 0;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BLOCK_DATA |
				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
		printk("icspll.o: Adapter does not support SMBus writes and Block reads\n");
		goto ERROR0;
	}

	/* Allocate space for a new client structure */
	if (!(data = kmalloc(sizeof(struct icspll_data), GFP_KERNEL))) {
		err = -ENOMEM;
		goto ERROR0;
	}

	/* Fill the new client structure with data */
	new_data = &data->client;
	new_client->data = data;
	new_client->id = icspll_id++;
	new_client->addr = address;
	new_client->adapter = adapter;
	new_client->driver = &icspll_driver;
	new_client->flags = 0;
	strcpy(new_client->name, "Clock chip");
	data->valid = 0;
	init_MUTEX(&data->update_lock);

	/* use write-quick for detection */
	if (i2c_smbus_write_quick(new_client, 0x00) < 0) {
		printk("icspll.o: No device found at 0x%X\n", address);
		goto ERROR1;
	}

	/* fill data structure so unknown registers are 0xFF */
	data->data[0] = ICSPLL_SIZE;
	for (i = 1; i <= ICSPLL_SIZE; i++)
		data->data[i] = 0xFF;

	/* Tell i2c-core a new client has arrived */
	if ((err = i2c_attach_client(new_client)))
		goto ERROR2;

	/* Register a new directory entry with module sensors */
	if ((err = i2c_register_entry(new_client, "icspll",
					  icspll_dir_table_template)) < 0)
		goto ERROR3;
	data->sysctl_id = err;
	err = 0;

      ERROR3:
	i2c_detach_client(new_client);
      ERROR2:
      ERROR1:
	kfree(data);
      ERROR0:
	return err;
}

static int icspll_detach_client(struct i2c_client *client)
{
	int err;

	i2c_deregister_entry(((struct icspll_data *) (client->data))->
				 sysctl_id);

	if ((err = i2c_detach_client(client))) {
		printk
		    ("icspll.o: Client deregistration failed, client not detached.\n");
		return err;
	}

	kfree(client->data);
	return 0;
}


#if 0
/* No writes yet (PAE) */
static int icspll_write_value(struct i2c_client *client, u8 reg, u16 value)
{
	return i2c_smbus_write_block_data(client->adapter, client->addr,
					  reg, value);
}
#endif

static void icspll_update_client(struct i2c_client *client)
{
	struct icspll_data *data = client->data;
	int i, len;

	down(&data->update_lock);

	if ((jiffies - data->last_updated > HZ + HZ / 2) ||
	    (jiffies < data->last_updated) || !data->valid) {

		len =
		    i2c_smbus_read_block_data(client,
					      0x00,
					      tempdata);
#ifdef DEBUG
		printk("icspll.o: read returned %d values\n", len);
#endif
		if (len > ICSPLL_SIZE)
			len = ICSPLL_SIZE;
		for (i = 0; i < len; i++)
			data->data[i] = tempdata[i];

		data->last_updated = jiffies;
		data->valid = 1;
	}

	up(&data->update_lock);
}


void icspll_contents(struct i2c_client *client, int operation,
		     int ctl_name, int *nrels_mag, long *results)
{
	int i;
	struct icspll_data *data = client->data;

	if (operation == SENSORS_PROC_REAL_INFO)
		*nrels_mag = 0;
	else if (operation == SENSORS_PROC_REAL_READ) {
		icspll_update_client(client);
		for (i = 0; i < ICSPLL_SIZE; i++) {
			results[i] = data->data[i];
		}
#ifdef DEBUG
		printk("icspll.o: 0x%X ICSPLL Contents: ", client->addr);
		for (i = 0; i < ICSPLL_SIZE; i++) {
			printk(" 0x%X", data->data[i]);
		}
		printk(" .\n");
#endif
		*nrels_mag = ICSPLL_SIZE;
	} else if (operation == SENSORS_PROC_REAL_WRITE) {

/* No writes to the ICSPLL (yet, anyway) (PAE) */
		printk("icspll.o: No writes to ICSPLLs supported!\n");
	}
}

static int __init sm_icspll_init(void)
{
	printk("icspll.o version %s (%s)\n", LM_VERSION, LM_DATE);
	return i2c_add_driver(&icspll_driver);
}

static void __exit sm_icspll_exit(void)
{
	i2c_del_driver(&icspll_driver);
}



MODULE_AUTHOR
    ("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, and Mark Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("ICSPLL driver");

module_init(sm_icspll_init);
module_exit(sm_icspll_exit);