mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-18 11:09:32 +00:00
Mark D. Studebaker
1b96bef07c
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2072 7894878c-1315-0410-8ee3-d5d059ff63e0
776 lines
37 KiB
Plaintext
776 lines
37 KiB
Plaintext
lm_sensors CHANGES file
|
|
-----------------------
|
|
This is a list of the most important changes in 2.x versions. It is by
|
|
no means complete, listing only the most significant changes.
|
|
The ultimate way to know what has changed is to run diff, or even neater,
|
|
ask CVS about it:
|
|
|
|
* Checkout the archive (see doc/cvs for how you can do this)
|
|
* Determine which tags are valid, by running this command from the
|
|
project root directory:
|
|
cvs status -v -l Makefile
|
|
Valid tags are usually of the form V2-1-0 for version 2.1.0
|
|
* Ask cvs for the difference between two versions:
|
|
cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS
|
|
for example:
|
|
cvs diff -r V2-0-0 -r V2-0-1 -u
|
|
|
|
-----------------------------------------------------------------------------
|
|
2.8.2 (???)
|
|
File sensors.conf.eg: Change lm75 scaling back to 1
|
|
Library: Fix bmcsensors scaling, increase number of sensors;
|
|
Add w83627thf support; Advance version to 3.0.0;
|
|
Add hermes, ADM1032, ASB100 support;
|
|
Add it87 sensor type support;
|
|
Add sysfs support for kernel 2.6
|
|
Makefiles: Install fancontrol, pwmconfig, decode-*.pl;
|
|
Fail if no kernel .config file exists
|
|
Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm,
|
|
it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595,
|
|
smsc47m1, thmc50, via686a, w83627hf, w83781d:
|
|
Remove initialization of limits by driver.
|
|
Module asb100: New
|
|
Module bmcsensors: Fix voltage scaling, voltage and fan limits
|
|
Module fscher: New (Fujitsu-Siemens Hermes driver)
|
|
Module i2c-piix4: Add support for CSB6
|
|
Module i2c-sis630: Sync with 2.6.0-X driver version
|
|
Module it87: Add pwm and "smart guardian" support;
|
|
add it87 sensor type support
|
|
Module lm90: Add ADM1032 support
|
|
Module w83781d: Fix 791d and 627hf detection
|
|
Programs i2cdetect, i2cdump, i2cset: add -v (version) option;
|
|
support sysfs for i2c bus search
|
|
Program pwmconfig: Handle multiple fans controlled by a single pwm
|
|
Program sensors: Add ADM1032 support; add messages for sysfs
|
|
Program sensors-detect: Prefer Super I/O drivers;
|
|
Fix W83627HF and W83791D detection; detect CSB6;
|
|
Detect ADM1029,30,31,32;
|
|
Detect W83637HF, W83697UF;
|
|
Add it87 sensor type support
|
|
|
|
|
|
2.8.1 (20031005)
|
|
NOTE: Requires i2c-2.8.1 or newer!
|
|
File sensors.conf.eg: Improved adm1025 section
|
|
Default temp labels for as99127f
|
|
Improved lm83 section
|
|
Better support for Asus A7V8X-X
|
|
File doc/chips/SUMMARY: Add SMSC manufacturer ID
|
|
File doc/chips/adm1025: Add decent documentation (almost new)
|
|
File doc/chips/lm83: Known motherboards list update, misc updates
|
|
Library: Change adm1025 names (hyst/over become low/high)
|
|
Swap adm1025 temp1 and temp2 to match the driver's order
|
|
Advance version to 2.0.1
|
|
Update lm83 support
|
|
Add support for lm90, xeontemp, max6650
|
|
Add separate messages for read and write errors
|
|
Add missing message for parse error
|
|
Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS
|
|
Modules (various): Fix includes for compilation on Alpha
|
|
Use the new i2c_delay function instead of the various
|
|
do_pause functions
|
|
Module i2c-ali15x3: Fix resource leak (Daniele Bellucci)
|
|
Module i2c-nforce2: Cleanups
|
|
Module i2c-i810: Use readl/writel for portable access to PCI memory
|
|
Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini)
|
|
Module i2c-savage4: Use readl/writel for portable access to PCI memory
|
|
Module i2c-sis630: Fix detection
|
|
Add block data read/write support
|
|
Module i2c-sis645: Detection method change/bugfix
|
|
Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov)
|
|
Module i2c-voodoo3: Use readl/writel for portable access to PCI memory
|
|
Module adm1025: Major driver update
|
|
Add support for Philips NE1619
|
|
Simplify the driver a lot (unified voltages, unified
|
|
temperatures and much more)
|
|
Fix default voltage limits
|
|
Change default temperature limits
|
|
Swap remote and local temperatures to match the internal
|
|
registers order (make the code unification possible)
|
|
Export remote diode fault through alarms
|
|
Module ddcmon: Major update
|
|
Add half a dozen new features
|
|
Add checksum parameter (same as for the eeprom module)
|
|
Fix monitor limits
|
|
Module eeprom: Ignore Sony Vaio EEPROMs with a password set
|
|
Module lm78: Fix a fan_div/fan_min bug
|
|
Module lm83: Add t_crit and alarms support
|
|
Module lm90: New
|
|
Module max6650: New
|
|
Module saa1064: New
|
|
Module smsc47m1: Add support for 47M142
|
|
Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms;
|
|
enhance w83627thf support
|
|
Module w83781d: Enhance chip detection; clean up error returns;
|
|
fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms
|
|
Module xeontemp: New
|
|
Program decode-dimms.pl: Add Direct Rambus (DRDRAM)
|
|
Mark Rambus as unsupported
|
|
Program decode-edid.pl: New
|
|
Interfaces between our eeprom module and
|
|
parse-edid from the read-edid project
|
|
Program p4b_smbus: Fix SMP compilation
|
|
Program sensord: Add support for IT87 (Mike Black)
|
|
Change ADM1025 support to match the changes made to
|
|
the library
|
|
Program sensors: Rewrite and enhance EEPROM support
|
|
Change LM83 and ADM1025 support to match the changes
|
|
made to the library
|
|
Add DRDRAM support to print_eeprom
|
|
Exit(1) on /proc write failure (Malte Starostik)
|
|
Add LM90, MAX6650 support
|
|
Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064
|
|
Add support for LM82, LM86, LM89
|
|
Improved W83781D family detection
|
|
Add support for AS19927F rev.2, ASB100 Bach
|
|
Add support for Asus Mozart-2 (3 types)
|
|
Add support for NE1619
|
|
Add support for FSC Hermes
|
|
Make sure /sbin is in the user's path
|
|
Fix EEPROM detection
|
|
Automatic module.conf and /dev/i2c* detection
|
|
Improve LM82 and LM83 detection
|
|
Handle "to-be-written" cleanly
|
|
Add detection for 47M14x Super I/O
|
|
Handle the one-address-many-chips-same-driver
|
|
case
|
|
|
|
|
|
2.8.0 (20030714)
|
|
NOTE: Requires i2c-2.8.0 or newer!!!
|
|
Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required;
|
|
2.4.13 or later required for mkpatch.
|
|
File i2c-dev.h: Include userspace portion removed from i2c-dev.h in
|
|
i2c package
|
|
File doc/chips/fscscy: Add watchdog documentation
|
|
File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations
|
|
File sensors.h: Now automatically generated
|
|
Library: Add support for exponents and logarithms for vt1211/vt8235 temps;
|
|
add adm1026, lm83, lm85, w83791d support;
|
|
Advance version to 2.0.0
|
|
Makefiles: Generate warnings if new library won't be found by ld.so;
|
|
Modules now install in kernel/drivers/i2c/[busses,chips];
|
|
Ensure that headers in /usr/local/include are used first;
|
|
Don't use /usr/include headers for modules;
|
|
Handle multiple UTS_RELEASE definitions in linux/version.h;
|
|
Automatically generate kernel/include/sensors.h;
|
|
Remove old gzipped modules; remove old misc directory if empty;
|
|
Remove pre-2.4 installation method;
|
|
-Wall now the default;
|
|
Add new targets user, user_install, and help;
|
|
Run depmod after module installation
|
|
Modules (all): Cleanups including
|
|
- Add #include <i2c-proc.h>
|
|
- C99 initializers
|
|
- Remove #ifdef MODULE
|
|
- Remove #ifndef THIS_MODULE
|
|
- Remove #ifndef MODULE_LICENSE
|
|
- Remove other 2.1/2.2 #ifdefs
|
|
- Remove #include "sensors.h", copy SYSCTL defs to module
|
|
- Remove excess #includes
|
|
- Remove argument in i2c_register_entry()
|
|
- Remove dummy xxx_command() definition
|
|
- Remove EXPORT_NO_SYMBOLS
|
|
- Remove init_MUTEX #define
|
|
- Remove xxx_inc_use() and xxx_dec_use() functions; modules
|
|
no longer adjust their own refcounts
|
|
- Use module_init() and module_exit()
|
|
- Update to new i2c_driver struct definition
|
|
Modules (bus PCI): Convert to PCI-module-style initialization
|
|
Modules (several): Add support for AMD Opteron VRM (VID) encoding
|
|
Module adm1021: Set alarm on failed reads and report old value;
|
|
merge changes from kernel 2.5.54
|
|
Module adm1026: New
|
|
Module bmcsensors: Fix compile when DEBUG=1
|
|
Modules ddcmon, eeprom: Use i2c block reads if possible;
|
|
better error handling
|
|
Module ds1307: Add to Makefile
|
|
Module gl520sm: Fix temperature over/hyst writes
|
|
Module lm75: merge changes from kernel 2.5.54
|
|
Module lm83: New
|
|
Module lm85: New
|
|
Module i2c-ali1535: Check for invalid transaction
|
|
Module i2c-ali15x3: Check for invalid transaction
|
|
Module i2c-amd756: merge changes from kernel 2.5.54;
|
|
check for invalid transaction
|
|
Module i2c-amd8111: merge changes from kernel 2.5.54
|
|
Module i2c-i801: Add support for 82801EB (ICH5)
|
|
Module i2c-i810: Fix for some chips
|
|
Module i2c-nforce2: New
|
|
Module i2c-piix4: Check for invalid transaction
|
|
Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs
|
|
Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746
|
|
north bridges; SiS962 and SiS963 south bridges
|
|
Module i2c-viapro: Check for invalid transaction
|
|
Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve
|
|
pwm and pwm enable support; update docs
|
|
Module smbus-arp: Check adapter for HW or SW PEC support;
|
|
add reset option
|
|
Module w83781d: Add support for w83791d
|
|
Module w83627hf: New
|
|
Program decode-dimms.pl: Recognize DDR and Rambus
|
|
Program eeprom: Fix writes for small eeproms
|
|
Program eeprom, eepromer: Use local i2c-dev.h for build
|
|
Program fancontrol: New
|
|
Program lm_sensors.init: Call sensors -s in start()
|
|
Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha;
|
|
Add adm1026,lm85 support;
|
|
Remove sensors.c file; add sensors_compat.h;
|
|
Remove patches to i2c-core.c and drivers/char/mem.c;
|
|
Now works only for kernels 2.4.13 or later
|
|
Program p4b_smbus: Fix 'make install';
|
|
Install in same place as other modules;
|
|
Clear correct bits in config word
|
|
Program pwmconfig: New
|
|
Program sensors: add adm1026, lm85, w83791d support
|
|
Program sensors-detect: Add super i/o detection (smsc47m1, vt1211,
|
|
w83627hf, w83627thf, w83697hf);
|
|
Add support for SiS651, SiS961, SiS745, SiS746;
|
|
Support dmidecode 2.0 and later;
|
|
Fix "C" format error;
|
|
Add support for adm1026, 82801EB (ICH5), W83791D;
|
|
Add support for w83l785ts, nForce2;
|
|
Fix UTF-8 incompatibility;
|
|
Better support for lm75;
|
|
Add support for lm83
|
|
|
|
2.7.0 (20021208)
|
|
NOTE: Requires i2c-2.7.0 or newer.
|
|
File doc/busses/i2c-ali1535: Add license, miscellaneous changes
|
|
File doc/busses/i2c-ali15x3: Add license, miscellaneous changes
|
|
File doc/busses/i2c-sis645: Add license
|
|
File doc/chips/lm92: Add license, features
|
|
File doc/chips/maxilife: Add license, parameters, features
|
|
File doc/chips/smartbatt: Complete rewrite
|
|
File doc/chips/vt8231: Add license, parameters
|
|
File sensors.conf.eg: Add section for lm75; complete the lm78 section
|
|
Library: Add support for MC1066; add multiple VRM version support for lm87;
|
|
enhance adm1023 support; initial support for Sony Vaio eeprom;
|
|
add support for bmcsensors; add hacks for additional dummy drivers
|
|
Makefile: Take kernel source location from /lib/modules/x.x.x/build;
|
|
add flags for x86_64 compiles
|
|
Module adm1021: Add support for MC1066
|
|
Module bmcsensors: New
|
|
Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from
|
|
kernel 2.5.43; fix 2.2 kernel compiles
|
|
Module gl518sm: Iterate allowed only for rev 0x00
|
|
Module i2c-amd756: Configure base address for nForce support;
|
|
check for uninitialized base address;
|
|
add support for amd8111 (SMBus 1.0)
|
|
Module i2c-amd8111: New (SMBus 2.0)
|
|
Module i2c-ipmb: New
|
|
Module i2c-ipmi: New
|
|
Module i2c-keywest: Sync with kernel 2.4.20
|
|
Module i2c-sis630: Add support for SiS730
|
|
Module i2c-sis645: Improve support for SiS645/961;
|
|
add support for SiS645DX/961 and SiS735;
|
|
fix 2.2 kernel compiles
|
|
Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235
|
|
Module lm87: Add multiple VRM version support
|
|
Module vt1211: Fix inx limits and alarms; fix in0
|
|
Module vt8231: Fix inx limits and alarms; fix in0
|
|
Module w83781d: Fix in0/in1 initialization
|
|
Module smartbatt: New
|
|
Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes
|
|
Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output;
|
|
stop decoding on checksum error
|
|
Program dmidecode: Fix read bug; upgrade to version 1.8
|
|
Program doc-insmod: Complete rewrite; fix author output
|
|
Program doc-features: Complete rewrite; handle missing sysctl entries;
|
|
handle unknown prefix with suggestion
|
|
Program lm_sensors.init: Remove spaces bug; add green/red output
|
|
Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111
|
|
Program rrd: Add sanity limits to newly-created RRD.
|
|
Program sensord: (v0.6.2) Add sanity limits to newly-created RRD.
|
|
Program sensors: Add support for MC1066, Rambus Rimms;
|
|
fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition;
|
|
initial support for Sony Vaio eeprom
|
|
Program sensors-detect: Add support for MC1066, smart battery, 8235,
|
|
IPMI, AMD8111; add help if no sensors found;
|
|
add ACPI method for IBM system detection;
|
|
work with old Perl versions again;
|
|
initial support for Sony Vaio eeprom
|
|
|
|
2.6.5 (20020915)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231
|
|
Library: Fix fan3_div writes for w8378* and it87; add vt8231
|
|
Module dmi_scan: new
|
|
Module ds1621: Fix enable/disable
|
|
Module eeprom: Do not corrupt 24RF08's when checksum=1
|
|
Module i2c-i801: Check for uninitialized base address;
|
|
enable if not enabled
|
|
Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption
|
|
Module i2c-sis630: new
|
|
Module i2c-sis645: new
|
|
Module lm92: Fix in-kernel initialization
|
|
Module via686a: Remove VT8231 support
|
|
Module vt8231: new
|
|
Module w83781: recognize Asus "ASB100 Bach" as AS99127F
|
|
Program dmidecode: new
|
|
Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install'
|
|
Program mkpatch: Add Config.in entries for, lm92,
|
|
pcf8574, pcf8591, smsc47m1, vt1211;
|
|
add dmi_scan
|
|
Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem
|
|
Program lm_sensors.init: fix stop()
|
|
Program sensord: (v0.6.1) Add /usr/local/etc to config file path;
|
|
add support for logging loadavg in RRD;
|
|
fix down-converting raw labels for RRD;
|
|
update chip support, still behind sensors
|
|
Program sensors: Add /usr/local/etc to config file path;
|
|
fix -c and -u flags; add vt8231
|
|
Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F;
|
|
refuse to run on IBM systems;
|
|
fix sysconfig module numbering;
|
|
change quick write to not corrupt 24RF08's
|
|
|
|
2.6.4 (20020719)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
File doc/vid: New
|
|
File include/sensors_vid.h: New
|
|
File sensors.conf.eg: Add vt1211, smsc47m1
|
|
Library: Add multiple VRM version support for adm1025, w83781d;
|
|
fix 'flex scanner jammed' on some systems;
|
|
add vt1211, smsc47m1, lm92;
|
|
fix access mode checking
|
|
Makefiles: For 2.4+ kernels, modules now install in
|
|
kernel/drivers/[i2c,sensors] , not misc/ , and
|
|
'make install' removes old versions in misc/ .
|
|
Use $CFLAGS and $CPPFLAGS if defined.
|
|
Module adm1025: Add multiple VID version support
|
|
Module ds1307: new
|
|
Module i2c-amd756: Add nVidia nForce support; fix block read length;
|
|
reliability improvements
|
|
Module i2c-hydra: Flush posted writes
|
|
Module i2c-i801: Add support for 82801DB (ICH4)
|
|
Module i2c-i810: Flush posted writes
|
|
Module i2c-savage4: new
|
|
Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147)
|
|
Module i2c-voodoo3: Flush posted writes
|
|
Module ds1307: New
|
|
Module lm92: New
|
|
Module smbus-arp: new
|
|
Module smsc47m1: new
|
|
Module via686a: Add support for VT8231 sensors
|
|
Module vt1211: new
|
|
Module w83781d: Add multiple VID version support; fix temp alarms
|
|
Program eeprom: new
|
|
Program i2cdump: Add smbus block command specification, add PEC support
|
|
Program lm_sensors.init: new
|
|
Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92,
|
|
pcf8574, pcf8591, smsc47m1, vt1211
|
|
Program p4b_smbus: Add support for ICH4
|
|
Program rrd: Fix swapped CPU and MB temps in summ_week.cgi
|
|
Program sensord.init: Renamed, was prog/init/sensors
|
|
Program sensord: Major update, now requires rrd source;
|
|
not compiled by default
|
|
Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A
|
|
(don't display algo. and adap.) option;
|
|
add vt1211, smsc47m1, lm92
|
|
Program sensors-detect: Add VT8231, VT8233A, several S3 devices;
|
|
add 82801DB, LM85; fix perl warnings;
|
|
generate /etc/sysconfig/lm_sensors for
|
|
lm_sensors.init script
|
|
|
|
2.6.3 (20020322)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+
|
|
File doc/chips/it87: add more temp_type help
|
|
File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3;
|
|
add adm1021 section; add lm87 AIN[1,2] template;
|
|
swap negative voltage limits for 782d,783s,627hf,
|
|
697hf,it87; add more it87 help; swap neg. voltage
|
|
limits for lm78(-j), lm79, w83781d, as99127f
|
|
Library: Add PCF8591, W83697HF, ADM1023 support;
|
|
fix w83* fan_min computes;
|
|
swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f
|
|
Module adm1024: Add MODULE_LICENSE("GPL")
|
|
Module bt869: Add s-video out and DVD resolution support
|
|
Module eeprom: Add support for locations 128-255; rename /proc entries in hex
|
|
Module fscscy: implement min/max for voltages and fans
|
|
Module i2c-amd756: Add support for AMD768
|
|
Module i2c-i810: Add support for 810E
|
|
Module i2c-keywest: Big update, sync with kernel 2.4.18
|
|
Module i2c-piix4: Check for uninitialized base address
|
|
Module i2c-sis5595: Blacklist 645, 735
|
|
Module i2c-viapro: Check for uninitialized base address
|
|
Module gl518sm: Standardize /proc entries in0-3
|
|
Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7];
|
|
fan -> fan1; fix temp2 limit writes
|
|
Module pcf8574: Add support for PCF8574A; /proc interface changed
|
|
Module pcf8591: new
|
|
Module sis5595: Blacklist 645, 735
|
|
Module w83781d: Add W83697HF support; allow force_subclients parameter
|
|
for Tyan 2460
|
|
Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names
|
|
Program decode-vaio.pl: new
|
|
Program i2cdump: Add i2c block read capability (requires i2c-2.6.3);
|
|
add text output
|
|
Program init/sensors: New SysV init script
|
|
Program mkpatch.pl: Add support for fscscy, add more help entries
|
|
Program p4b_smbus: new
|
|
Program rrd: Install summ_week.cgi
|
|
Program sensors: Add PCF8591, W83697HF, ADM1023 support,
|
|
clean up chassis intrusion prints
|
|
Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E;
|
|
fix Via686a and it87 detection;
|
|
add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231;
|
|
fix uninitialized values; it87 beats lm78
|
|
|
|
2.6.2 (20011118)
|
|
NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer.
|
|
Chip Modules (all): malloc.h -> slab.h
|
|
Modules (all): Add MODULE_LICENSE("GPL")
|
|
File doc/FAQ: More updates and additions
|
|
File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations
|
|
Library: Add fscpos and fscscy support, fix gl520 in4 ID,
|
|
update it87 alarm ID's.
|
|
Module fscpos: new (Fujitsu-Siemens Poseidon driver)
|
|
Module fscscy: new (Fujitsu-Siemens Scylla driver)
|
|
Module i2c-amd756: Improve busy handling/printk's
|
|
Module i2c-i801: Add 82801CA/CAM support
|
|
Module i2c-keywest: Sync with PPC people, it works now
|
|
Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support
|
|
Module i2c-viapro: Add Via VT8233 support
|
|
Module it87: Merge alarm_* /proc entries to alarms
|
|
Module sis5595: Fix support for rev B0
|
|
Module via686a: Make limit initializations reliable
|
|
Module w83781d: Allow init=0 parameter to bypass initialization
|
|
Program isadump: Add flat address space (PCI) support
|
|
Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621,
|
|
fscpos, it87, maxilife, mtp008
|
|
Program sensors: Fix w83781d temp precision
|
|
Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c),
|
|
Fujitsu Poseidon and Scylla,
|
|
Intel 82443MX and 82801CA/CAM detection,
|
|
add ITE 8172G detection (driver in kernel 2.4.10)
|
|
|
|
2.6.1 (20010830)
|
|
File BUGS: Updated
|
|
File doc/FAQ: More updates and additions
|
|
File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A
|
|
File sensors.conf.eg: Fix/enhance it87 section
|
|
Library: ds1621 and it87 updates
|
|
Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled.
|
|
Module i2c-amd756: Add AMD 766 support
|
|
Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6
|
|
Module i2c-piix4: Add Serverworks CSB5 support
|
|
Module i2c-sis5595: Recognize unsupported chips and refuse to load
|
|
Module adm1025: Fixed temp2 min/max writes
|
|
Module ds1621: Add 12-bit precision mode
|
|
Module it87: Enable all alarms, add in8 support, add sensor type selection
|
|
Module sensors: Don't initialize i2c-proc (moved to i2c-core);
|
|
remove support for module
|
|
Module sis5595: Recognize unsupported chips and refuse to load
|
|
Module w83781d: Fix fan speed for as99127f (broken by 2.6.0)
|
|
Program eepromer: new
|
|
Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation
|
|
of sensors.c as a module in kernel
|
|
Program sensors: it87 updates; adjust temp. precision for some chips
|
|
Program sensors-detect: Fix ADM1024 and ADM1025 detection;
|
|
recognize unsupported SiS chips;
|
|
recognize AMD 766 and Serverworks CSB5.
|
|
|
|
2.6.0 (20010612)
|
|
NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!!
|
|
If your make fails because it can't find <linux/i2c-proc.h>, you
|
|
forgot this step!!!
|
|
File doc/FAQ: Many, many updates and additions
|
|
File doc/busses/i2c-sis5595: new
|
|
File doc/busses/i2c-tsunami: new
|
|
File doc/chips/it87: new
|
|
File doc/chips/via686a: Claim support for 686b.
|
|
File README.thinkpad: new
|
|
File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations;
|
|
Add lm87, adm9240, ds1780, lm81 templates;
|
|
Enhance help comments in file;
|
|
Add Tyan S2510 dual-MTP008 example;
|
|
Make separate sis5595 section.
|
|
Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package
|
|
Include file sensors.h: Most contents moved to i2c-proc.h in i2c package
|
|
Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4;
|
|
Add support for maxilife-nba and amd1024;
|
|
Change from sensors_* to i2c_* globals for new i2c-proc.[ch]
|
|
Chip Modules (all ISA): Remove #include "i2c-isa.h"
|
|
Chip Modules (all): Change from sensors_* to i2c_* globals
|
|
for new i2c-proc.[ch]
|
|
Makefiles: enhance to support Alpha architecture
|
|
Module adm1021: Fix lm84 and gl523sm support
|
|
Module adm1024: new
|
|
Module i2c-i801: Chip detection cleanup
|
|
Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel
|
|
Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled.
|
|
Module i2c-tsunami: New
|
|
Module i2c-via: Ensure i2c bus is tristated correctly.
|
|
Module it87: new driver for IT8705, IT8712, Sis950 chips
|
|
Module lm78: Recognize chipid=0x20
|
|
Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations
|
|
Module mtp008: Fix temp initializations;
|
|
Save BIOS pin configuration of temps and fans;
|
|
Fix sensor type reads/writes and fan min writes;
|
|
Fix spurious invalid sensor type messages
|
|
Module sensors: Disabled, moved to i2c package as i2c-proc.c; only
|
|
used for patched kernel now.
|
|
Add xxx_init() calls for drivers added to mkpatch in 2.5.5.
|
|
Module sis5595: Fix temp, add in4 for chip revision 0xc0;
|
|
Allow force_addr=0xaddr
|
|
Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards)
|
|
Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp
|
|
reading changes; Add messages for subclient
|
|
registration failure
|
|
Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support
|
|
Program i2cset: new
|
|
Program isadump: fix for Alpha arch. compiles
|
|
Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help;
|
|
Remove ltc1710; Fix i2c_sis5595 typo;
|
|
Support kernel 2.4.5 makefile change;
|
|
Add i2c-tsunami; fixed i2c-voodoo3 configuration
|
|
Program sens_update_rrd: new
|
|
Program sensord: Add -d (debug) and -p (pid-file) options
|
|
Program sensors: Change reported version from 1.3 to the lm_sensors version;
|
|
Fix swapped limit and hysteresis on 9240, 5595, 686a;
|
|
Change mtp008 temps from max/min to limit/hyst;
|
|
Add maxilife-nba, adm1024, it87 support.
|
|
Program sensors-detect: Recognize lm78 with chipid=0x20;
|
|
Recognize SMSC Victory66 South Bridge;
|
|
Add devfs /dev/i2c/x support;
|
|
Add adm1024, it87xx support; Add thinkpad warning.
|
|
Program tellerstats: new
|
|
|
|
2.5.5 (20010115)
|
|
NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS
|
|
you have kernel 2.4.0-prerelease or greater.
|
|
Chip modules (all): Update mutex definition (works now for new 2.2 kernels)
|
|
File doc/developers/proc: new
|
|
File sensors.conf.eg: Add mtp008 entries, adm1025 entries
|
|
Library: Add ds1621, mtp008 support
|
|
Module adm1021: Add support for adm1021a / adm1023
|
|
Modules adm1021, thmc50: Rename /proc entries to temp[1-2]
|
|
Module adm1025: Add support for remote temp; rename /proc entries to
|
|
in[0-5] and temp[1-2]; fix negative temp readings
|
|
Module adm9240: Rename /proc entries to in[0-5]
|
|
Module ddcmon: allow force and force_ddcmon parameters
|
|
Module ds1621: new
|
|
Module i2c-ali1535: Enhance error checking and recovery; add mutex
|
|
Module i2c-i810: Add "dummy write" before reads per Intel prog. ref.
|
|
Module i2c-piix4: add support for ServerWorks southbridge OSB4
|
|
Module lm87: cleanup, update voltage calculations
|
|
Module mtp008: new
|
|
Module pcf8574: change update time to 5 seconds
|
|
Modules sis5595, i2c-sis5595: Check for uninitialized base addresses
|
|
Module w83781d: fix beep setting via /proc
|
|
Programs editticket, readticket: new
|
|
Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed
|
|
Program mkpatch.pl: more fixes; now adds many more modules
|
|
Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option;
|
|
add adm1025 temp2; report temp limits correctly as
|
|
min/max or limit/hysteresis; print message if no
|
|
sensors are found. Removed false errors from lm87 reads.
|
|
Program sensors-detect: Add ds1621, mtp008 detection;
|
|
add ServerWorks detection
|
|
|
|
2.5.4 (20001012)
|
|
Module i2c-viapro: Add support for Via 596B (0x3051)
|
|
Program m7101: moved to CVS tree, updated for 2.4.0 kernels
|
|
Program mkpatch.pl: fixed infinite loop
|
|
Program sensors-detect: Detect Via 596B (0x3051)
|
|
|
|
2.5.3 (20001008)
|
|
NOTE: i2c 2.5.3 MUST BE be compiled and installed first.
|
|
File useful_addresses.html: update
|
|
Library: Add lm87 support
|
|
Module pcf8574: new
|
|
Module i2c-ali1535: new
|
|
Module i2c-ali15x3: removed force #ifdef.
|
|
Module i2c-i801: support Intel 82801BA (815E chipset)
|
|
Module i2c-i801: add i2c block write support, fix smbus block bugs
|
|
(requires i2c 2.5.3 package)
|
|
Module i2c-i810: support Intel 82815
|
|
Module lm87: new
|
|
Module sensors: Fix for kernel 2.4.0-test8
|
|
(remove copy_to_user_ret and put_user_ret)
|
|
Module w83781d: limit fan divisors to 8 max. for as99127f
|
|
Program decode-dimms: Add html output option, update for SPD spec 1.2B.
|
|
Program i2cdump: Add smbus block read support
|
|
Programs i2cdetect, i2cdump: Improve error reporting
|
|
Program sensors: new switch -u (--unknown)
|
|
Program sensors-detect: detect Intel 82801BA (815E chipset)
|
|
Program sensors-detect: detect Intel 82815
|
|
Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet)
|
|
Program sensors-detect: detect National LM87
|
|
Program sensors-detect: detect nVidia devices supported by i2c-riva.o
|
|
Program sensors-detect: Improve error reporting
|
|
|
|
2.5.2 (20000709)
|
|
File sensors.conf.eg: Fix lm80 in8 calculation
|
|
Module w83781d: W83783S no longer crashes on unloading
|
|
Program sensors-detect: more robustness in case of unknown i2c adapters
|
|
Program sensors-detect, libsensors: fix eeprom size reporting
|
|
Program sensord: more flexibility, support for alarm scanning etc.
|
|
Program sensors: support for ignore setting on sensor alarms.
|
|
Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too.
|
|
|
|
2.5.1 (20000618)
|
|
Library: Add adm1025 support
|
|
Module adm1025: new
|
|
Module ddcmon: Fixed bus scan which could hang SMBus
|
|
Module i2c-keywest: new
|
|
Module maxilife: Add support for Maxilife '99 (NBA)
|
|
Module via686a: Enable sensors if not enabled by BIOS
|
|
Module w83781d: Improve w83783s support, w83627hf always has 2 pwm
|
|
Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring
|
|
Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3
|
|
Module w83781d: Fis as99127f fan speed (was 66% too high)
|
|
Module w83781d: Improve beep input checking
|
|
Program i2cdump: Add Winbond-style bank selection
|
|
Program isadump: Add Winbond-style bank selection
|
|
Program sensors: Add adm1025 support.
|
|
Program sensors: Remove some as99127f entries, fix as99127 "(beep)"
|
|
Program sensors-detect: Fix i801 detection, add adm1025 driver entry
|
|
File sensors.conf.eg: Add Maxilife '99 entries
|
|
File sensors.conf.eg: Remove some as99127f entries.
|
|
Note: For as99127f, reinstall sensors.conf.eg manually (make install
|
|
won't reinstall it) or else 'sensors -s' will fail.
|
|
|
|
2.5.0 (20000312)
|
|
Dropped all kernel 2.0 and 2.1 compatibility
|
|
Module i2c-i810: new
|
|
Module ddcmon: new
|
|
Module via686a: new
|
|
Module i2c-amd756: fixed region request
|
|
Module i2c-voodoo3: Converted to use i2c-algo-bit layer
|
|
Module w83781d: Don't change pin settings at initialization;
|
|
also fix chip detection.
|
|
Library: Support for ddcmon and via686a
|
|
Program sensors-detect: Support for ddcmon and via686a
|
|
Program sensors: Support for eeprom, ddcmon and via686a
|
|
|
|
2.4.5 (20000116)
|
|
Introduced DESTDIR installation prefix
|
|
Module lm80: fixes, temperature now read and set correctly
|
|
Module i2c-voodoo3: driver enhancements
|
|
Module w83781d: fixes, AS99127 works much better now
|
|
Library: New ignore keyword in config file
|
|
Programs: Support for new ignore keyword
|
|
Program sensors-detect: Support for MGA detections
|
|
|
|
2.4.4 (19991201)
|
|
Addition of the alpha release of AMD 756 SMBus host support.
|
|
Many fixes and updates to the gl518sm driver
|
|
Updates and fixes for device detection
|
|
|
|
2.4.0 (19990920)
|
|
Too much to list.
|
|
i2c and smbus parts are split off to a separate i2c package.
|
|
New drivers and other stuff.
|
|
|
|
2.3.4 (19990616)
|
|
Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs)
|
|
All: Now compiles against kernel 2.0.x (again ;)
|
|
Module gl518sm: some updates and refinements
|
|
|
|
2.3.3 (19990603)
|
|
All: Now compiles against kernel 2.3.x (x >= 1)
|
|
Module i2c-voodoo3: Timing issue fixes
|
|
Module bt869: Seems to be functional and relatively well tested
|
|
Many modules were modified to be more compatible with the new
|
|
Mutex structure in the new experimental kernels.
|
|
|
|
2.3.2 (19990507)
|
|
Module i2c-hydra: Now compiles on 2.0.x kernels
|
|
Module i2c-lm75: Slightly better detection
|
|
* New, but not compiled by default:
|
|
Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver
|
|
Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver
|
|
|
|
2.3.1 (19990501)
|
|
All: Now compiles on PPC
|
|
Module i2c-hydra: NEW
|
|
Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works
|
|
Module w83781d: Removed deadlock (mutex was not initialized)
|
|
Documentation: A few glitches removed
|
|
Makefile: default module installation directory is now
|
|
/lib/modules/current/extra/misc
|
|
Program sensors-detect: PPC Hydra now detected
|
|
Program sensors: Now prints complete GL518SM information
|
|
Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added
|
|
|
|
2.3.0 (19990422)
|
|
All: Many, many changes and improvements
|
|
All: Many small bugs and problems removed
|
|
Modules: New insmod parameters
|
|
Modules: Much improved chip detection
|
|
Module maxilife: NEW
|
|
Module adm1021: MAX1617A now also supported
|
|
Module adm9240: DS1780 now also supported
|
|
Module w83781d: W83782D and W83783S now also supported
|
|
Program sensors-detect: NEW
|
|
Library: All chips now supported
|
|
Documentation: Very much improved
|
|
|
|
2.2.2 (199903??)
|
|
Just some minor updates and bug fixes.
|
|
|
|
2.2.1 (19990218)
|
|
All: Removed compile warnings
|
|
Module i2c-dev: Small bug removed if DEBUG=1 was used
|
|
Module sis5595: Now compiles for 2.0 kernels
|
|
Module adm1021: Detection corrected
|
|
|
|
2.2.0 (19990216)
|
|
All: Set copyrights to include 1999
|
|
All: Small bugfixes
|
|
I2C: Upgraded to newest archive of Simon Vogl
|
|
Module i2c-dev: NEW
|
|
Module i2c-ali15x3: NEW
|
|
Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors
|
|
directories, and somewhat improved
|
|
Module sis5595: NEW
|
|
Modules: Renamed all bus modules to i2c-*, new directory lay-out
|
|
Library: Support for new chip drivers, several small bugs fixed
|
|
Library manual pages: NEW
|
|
Program i2cdetect: Moved to detect directory
|
|
Program detect.pl: NEW
|
|
Program doc-features: NEW
|
|
Program sensors: Added man-page
|
|
Document BUGS: Added cdrom bug and kernel i2c conflict
|
|
|
|
2.1.2 (19990116)
|
|
Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected
|
|
Module gl518sm.o: yet more bug fixes. It should at long last be usable now
|
|
Documentation in doc/kernel: NEW
|
|
|
|
2.1.1 (19990107)
|
|
Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35
|
|
and older
|
|
Module gl518sm.o: Miscelaneous bugs and problems solved
|
|
Program isadump: NEW
|
|
|
|
2.1.0 (19981230)
|
|
Library: Completely NEW
|
|
Program sensors: NEW
|
|
Program grab_busses: NEW
|
|
Program decode-dimms: More information
|
|
Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets
|
|
Module w83781d.o: NEW
|
|
Module lm80.o: NEW
|
|
Module gl518sm.o: new procfile beep, several small updates
|
|
Modules: Now use pin readings, no more scaling within the kernel (use the
|
|
library instead)
|
|
|
|
2.0.2 (19981214)
|
|
Module eeprom.o: NEW
|
|
Program decode-dimms: NEW
|
|
Modules: fill_inode fix, will stop segfaults on unloading in kernels after
|
|
2.1.58
|
|
Modules: Somewhat less verbose on transfers
|
|
Module lm78.o now recognizes and handles lm78-j and lm79
|
|
|
|
2.0.1 (1998121?)
|
|
Module gl518sm.o updates, to make it actually work
|
|
Module lm75.o high/low-byte swapping write bug fixed
|
|
|
|
2.0.0 (19981209)
|
|
Initial release
|