mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-21 11:39:31 +00:00
Mark D. Studebaker
6aa045fc8e
Hans-Frieder Vogt <hfvogt@arcor.de> git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1712 7894878c-1315-0410-8ee3-d5d059ff63e0
44 lines
1.3 KiB
Plaintext
44 lines
1.3 KiB
Plaintext
Kernel driver `i2c-nforce2.o'
|
|
|
|
Status: Beta, although no problems found during one month usage with hwsensor
|
|
|
|
Supported adapters:
|
|
* nVidia nForce2 SMBus PCI interface (10de:0064, included in nForce2 MCP)
|
|
Datasheet: not publically available, but seems to be similar to the
|
|
AMD-8111 SMBus 2.0 adapter.
|
|
|
|
Author: Hans-Frieder Vogt <hfvogt@arcor.de>
|
|
|
|
|
|
Module Parameters
|
|
-----------------
|
|
|
|
None.
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
i2c-nforce2 is a driver for the SMBuses included in the nVidia nForce2 MCP.
|
|
|
|
If your 'lspci -v' listing shows something like the following,
|
|
|
|
00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2)
|
|
Subsystem: Asustek Computer, Inc.: Unknown device 0c11
|
|
Flags: 66Mhz, fast devsel, IRQ 5
|
|
I/O ports at c000 [size=32]
|
|
Capabilities: <available only to root>
|
|
|
|
then this driver should support the SMBuses of your motherboard.
|
|
|
|
|
|
Notes
|
|
-----
|
|
|
|
The SMBus adapter in the nForce2 chipset seems to be very similar to the
|
|
SMBus 2.0 adapter in the AMD-8111 southbridge. However, I could only get the
|
|
driver to work with direct I/O access, which is different to the EC interface
|
|
of the AMD-8111.
|
|
Tested on Asus A7N8X. The ACPI DSDT table of the Asus A7N8X lists two SMBuses,
|
|
both of which are supported by this driver.
|