wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-10-15 10:39:31 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
8e64f3890e00a1f5242017ec79dcce613375255c
lm-sensors/kernel/chips/fscher.c
T
Jean Delvare c23099c76d Drop a common comment about limits being set in initialization 
functions. We no more do that.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3147 7894878c-1315-0410-8ee3-d5d059ff63e0
2005-10-30 09:05:58 +00:00

731 lines
26 KiB
C
Raw Blame History

/*
fscher.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
fujitsu siemens hermes chip,
module based on fscpos.c
Copyright (C) 2000 Hermann Jung <hej@odn.de>
Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
and Philip Edelbrock <phil@netroedge.com>
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-proc.h>
#include <linux/init.h>
#include "version.h"
#ifndef I2C_DRIVERID_FSCHER
#define I2C_DRIVERID_FSCHER 1046
#endif
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x73, SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(fscher);
/* The FSCHER registers */
/* chip identification */
#define FSCHER_REG_IDENT_0 0x00
#define FSCHER_REG_IDENT_1 0x01
#define FSCHER_REG_IDENT_2 0x02
#define FSCHER_REG_REVISION 0x03
/* global control and status */
#define FSCHER_REG_EVENT_STATE 0x04
#define FSCHER_REG_CONTROL 0x05
/* watchdog */
#define FSCHER_REG_WDOG_PRESET 0x28
#define FSCHER_REG_WDOG_STATE 0x23
#define FSCHER_REG_WDOG_CONTROL 0x21
/* fan 0 */
#define FSCHER_REG_FAN0_MIN 0x55
#define FSCHER_REG_FAN0_ACT 0x0e
#define FSCHER_REG_FAN0_STATE 0x0d
#define FSCHER_REG_FAN0_RIPPLE 0x0f
/* fan 1 */
#define FSCHER_REG_FAN1_MIN 0x65
#define FSCHER_REG_FAN1_ACT 0x6b
#define FSCHER_REG_FAN1_STATE 0x62
#define FSCHER_REG_FAN1_RIPPLE 0x6f
/* fan 2 */
#define FSCHER_REG_FAN2_MIN 0xb5
#define FSCHER_REG_FAN2_ACT 0xbb
#define FSCHER_REG_FAN2_STATE 0xb2
#define FSCHER_REG_FAN2_RIPPLE 0xbf
/* voltage supervision */
#define FSCHER_REG_VOLT_12 0x45
#define FSCHER_REG_VOLT_5 0x42
#define FSCHER_REG_VOLT_BATT 0x48
/* temperatures */
/* sensor 0 */
#define FSCHER_REG_TEMP0_ACT 0x64
#define FSCHER_REG_TEMP0_STATE 0x71
/* sensor 1 */
#define FSCHER_REG_TEMP1_ACT 0x32
#define FSCHER_REG_TEMP1_STATE 0x81
/* sensor 2 */
#define FSCHER_REG_TEMP2_ACT 0x35
#define FSCHER_REG_TEMP2_STATE 0x91
/* Initial limits */
/* For each registered FSCHER, we need to keep some data in memory. That
data is pointed to by fscher_list[NR]->data. The structure itself is
dynamically allocated, at the same time when a new fscher client is
allocated. */
struct fscher_data {
struct i2c_client client;
int sysctl_id;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 revision; /* revision of chip */
u8 global_event; /* global event status */
u8 global_control; /* global control register */
u8 watchdog[3]; /* watchdog */
u8 volt[3]; /* 12, 5, battery current */
u8 temp_act[3]; /* temperature */
u8 temp_status[3]; /* status of sensor */
u8 fan_act[3]; /* fans revolutions per second */
u8 fan_status[3]; /* fan status */
u8 fan_min[3]; /* fan min value for rps */
u8 fan_ripple[3]; /* divider for rps */
};
static int fscher_attach_adapter(struct i2c_adapter *adapter);
static int fscher_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind);
static int fscher_detach_client(struct i2c_client *client);
static int fscher_read_value(struct i2c_client *client, u8 register);
static int fscher_write_value(struct i2c_client *client, u8 register,
u8 value);
static void fscher_update_client(struct i2c_client *client);
static void fscher_init_client(struct i2c_client *client);
static void fscher_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results);
static void fscher_pwm(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscher_pwm_internal(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results,
int nr, int reg_min);
static void fscher_fan(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscher_fan_internal(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results,
int nr, int reg_state, int res_ripple);
static void fscher_temp(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscher_volt(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static void fscher_wdog(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results);
static struct i2c_driver fscher_driver = {
.name = "FSCHER sensor driver",
.id = I2C_DRIVERID_FSCHER,
.flags = I2C_DF_NOTIFY,
.attach_adapter = fscher_attach_adapter,
.detach_client = fscher_detach_client,
};
/* -- SENSORS SYSCTL START -- */
#define FSCHER_SYSCTL_VOLT0 1000 /* 12 volt supply */
#define FSCHER_SYSCTL_VOLT1 1001 /* 5 volt supply */
#define FSCHER_SYSCTL_VOLT2 1002 /* batterie voltage */
#define FSCHER_SYSCTL_FAN0 1101 /* state, ripple, actual value
fan 0 */
#define FSCHER_SYSCTL_FAN1 1102 /* state, ripple, actual value
fan 1 */
#define FSCHER_SYSCTL_FAN2 1103 /* state, ripple, actual value
fan 2 */
#define FSCHER_SYSCTL_TEMP0 1201 /* state and value of sensor 0,
cpu die */
#define FSCHER_SYSCTL_TEMP1 1202 /* state and value of sensor 1,
motherboard */
#define FSCHER_SYSCTL_TEMP2 1203 /* state and value of sensor 2,
chassis */
#define FSCHER_SYSCTL_PWM0 1301 /* min fan 0 */
#define FSCHER_SYSCTL_PWM1 1302 /* min fan 1 */
#define FSCHER_SYSCTL_PWM2 1303 /* min fan 2 */
#define FSCHER_SYSCTL_REV 2000 /* revision */
#define FSCHER_SYSCTL_EVENT 2001 /* global event status */
#define FSCHER_SYSCTL_CONTROL 2002 /* global control byte */
#define FSCHER_SYSCTL_WDOG 2003 /* watch dog preset, state and
control */
/* -- SENSORS SYSCTL END -- */
/* These files are created for each detected FSCHER. This is just a template;
though at first sight, you might think we could use a statically
allocated list, we need some way to get back to the parent - which
is done through one of the 'extra' fields which are initialized
when a new copy is allocated. */
static ctl_table fscher_dir_table_template[] = {
{FSCHER_SYSCTL_REV, "rev", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_in},
{FSCHER_SYSCTL_EVENT, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_in},
{FSCHER_SYSCTL_CONTROL, "control", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_in},
{FSCHER_SYSCTL_TEMP0, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_temp},
{FSCHER_SYSCTL_TEMP1, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_temp},
{FSCHER_SYSCTL_TEMP2, "temp3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_temp},
{FSCHER_SYSCTL_VOLT0, "in0", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_volt},
{FSCHER_SYSCTL_VOLT1, "in1", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_volt},
{FSCHER_SYSCTL_VOLT2, "in2", NULL, 0, 0444, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_volt},
{FSCHER_SYSCTL_FAN0, "fan1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_fan},
{FSCHER_SYSCTL_FAN1, "fan2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_fan},
{FSCHER_SYSCTL_FAN2, "fan3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_fan},
{FSCHER_SYSCTL_PWM0, "pwm1", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_pwm},
{FSCHER_SYSCTL_PWM1, "pwm2", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_pwm},
{FSCHER_SYSCTL_PWM2, "pwm3", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_pwm},
{FSCHER_SYSCTL_WDOG, "wdog", NULL, 0, 0644, NULL, &i2c_proc_real,
&i2c_sysctl_real, NULL, &fscher_wdog},
{0}
};
static int fscher_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, fscher_detect);
}
int fscher_detect(struct i2c_adapter *adapter, int address,
unsigned short flags, int kind)
{
int i;
struct i2c_client *new_client;
struct fscher_data *data;
int err = 0;
const char *type_name, *client_name;
/* Make sure we aren't probing the ISA bus!! This is just a safety
check at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
if (i2c_is_isa_adapter(adapter)) {
printk("fscher.o: fscher_detect called for an ISA bus adapter?!?\n");
return 0;
}
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto ERROR0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access fscher_{read,write}_value. */
if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
new_client = &data->client;
new_client->addr = address;
new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &fscher_driver;
new_client->flags = 0;
/* Do the remaining detection unless force or force_fscher parameter */
if (kind < 0) {
if (fscher_read_value(new_client, FSCHER_REG_IDENT_0) != 0x48) /* 'H' */
goto ERROR1;
if (fscher_read_value(new_client, FSCHER_REG_IDENT_1) != 0x45) /* 'E' */
goto ERROR1;
if (fscher_read_value(new_client, FSCHER_REG_IDENT_2) != 0x52) /* 'R' */
goto ERROR1;
}
kind = fscher;
type_name = "fscher";
client_name = "fsc hermes chip";
/* Fill in the remaining client fields and put it into the
global list */
strcpy(new_client->name, client_name);
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR3;
/* Register a new directory entry with module sensors */
if ((i = i2c_register_entry(new_client, type_name,
fscher_dir_table_template,
THIS_MODULE)) < 0) {
err = i;
goto ERROR4;
}
data->sysctl_id = i;
fscher_init_client(new_client);
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR4:
i2c_detach_client(new_client);
ERROR3:
ERROR1:
kfree(data);
ERROR0:
return err;
}
static int fscher_detach_client(struct i2c_client *client)
{
int err;
i2c_deregister_entry(((struct fscher_data *) (client->data))->sysctl_id);
if ((err = i2c_detach_client(client))) {
printk("fscher.o: Client deregistration failed, client not detached.\n");
return err;
}
kfree(client->data);
return 0;
}
static int fscher_read_value(struct i2c_client *client, u8 reg)
{
#ifdef DEBUG
printk("fscher: read reg 0x%02x\n",reg);
#endif
return i2c_smbus_read_byte_data(client, reg);
}
static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
{
#ifdef DEBUG
printk("fscher: write reg 0x%02x, val 0x%02x\n",reg, value);
#endif
return i2c_smbus_write_byte_data(client, reg, value);
}
/* Called when we have found a new FSCHER. */
static void fscher_init_client(struct i2c_client *client)
{
struct fscher_data *data = client->data;
/* read revision from chip */
data->revision = fscher_read_value(client,FSCHER_REG_REVISION);
}
static void fscher_update_client(struct i2c_client *client)
{
struct fscher_data *data = client->data;
down(&data->update_lock);
if ((jiffies - data->last_updated > 2 * HZ) ||
(jiffies < data->last_updated) || !data->valid) {
#ifdef DEBUG
printk("Starting fscher update\n");
#endif
data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);
data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);
data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);
data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
}
/* The next few functions are the call-back functions of the /proc/sys and
sysctl files. Which function is used is defined in the ctl_table in
the extra1 field.
Each function must return the magnitude (power of 10 to divide the date
with) if it is called with operation==SENSORS_PROC_REAL_INFO. It must
put a maximum of *nrels elements in results reflecting the data of this
file, and set *nrels to the number it actually put in it, if operation==
SENSORS_PROC_REAL_READ. Finally, it must get upto *nrels elements from
results and write them to the chip, if operations==SENSORS_PROC_REAL_WRITE.
Note that on SENSORS_PROC_REAL_READ, I do not check whether results is
large enough (by checking the incoming value of *nrels). This is not very
good practice, but as long as you put less than about 5 values in results,
you can assume it is large enough. */
void fscher_in(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscher_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscher_update_client(client);
switch(ctl_name) {
case FSCHER_SYSCTL_REV:
results[0] = data->revision ;
break;
case FSCHER_SYSCTL_EVENT:
/* bits 6, 5 and 2 are reserved => mask with 0x9b */
results[0] = data->global_event & 0x9b;
break;
case FSCHER_SYSCTL_CONTROL:
results[0] = data->global_control & 0x01;
break;
default:
printk("fscher: ctl_name %d not supported\n", ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if((ctl_name == FSCHER_SYSCTL_CONTROL) && (*nrels_mag >= 1)) {
data->global_control = (results[0] & 0x01);
printk("fscher: writing 0x%02x to global_control\n",
data->global_control);
fscher_write_value(client,FSCHER_REG_CONTROL,
data->global_control);
}
else
printk("fscher: writing to chip not supported\n");
}
}
#define TEMP_FROM_REG(val) (val-128)
void fscher_temp(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscher_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscher_update_client(client);
switch(ctl_name) {
case FSCHER_SYSCTL_TEMP0:
results[0] = data->temp_status[0] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[0]);
break;
case FSCHER_SYSCTL_TEMP1:
results[0] = data->temp_status[1] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[1]);
break;
case FSCHER_SYSCTL_TEMP2:
results[0] = data->temp_status[2] & 0x03;
results[1] = TEMP_FROM_REG(data->temp_act[2]);
break;
default:
printk("fscher: ctl_name %d not supported\n", ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 2;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
switch(ctl_name) {
case FSCHER_SYSCTL_TEMP0:
data->temp_status[0] = (data->temp_status[0] & ~0x02)
| (results[0] & 0x02);
printk("fscher: writing value 0x%02x to temp0_status\n",
data->temp_status[0]);
fscher_write_value(client, FSCHER_REG_TEMP0_STATE,
data->temp_status[0] & 0x02);
break;
case FSCHER_SYSCTL_TEMP1:
data->temp_status[1] = (data->temp_status[1] & ~0x02)
| (results[0] & 0x02);
printk("fscher: writing value 0x%02x to temp1_status\n",
data->temp_status[1]);
fscher_write_value(client, FSCHER_REG_TEMP1_STATE,
data->temp_status[1] & 0x02);
break;
case FSCHER_SYSCTL_TEMP2:
data->temp_status[2] = (data->temp_status[2] & ~0x02)
| (results[0] & 0x02);
printk("fscher: writing value 0x%02x to temp2_status\n",
data->temp_status[2]);
fscher_write_value(client, FSCHER_REG_TEMP2_STATE,
data->temp_status[2] & 0x02);
break;
default:
printk("fscher: ctl_name %d not supported\n",ctl_name);
}
}
else
printk("fscher: writing to chip not supported\n");
}
}
/*
* The final conversion is specified in sensors.conf, as it depends on
* mainboard specific values. We export the registers contents as
* pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
* sense per se, but it minimizes the conversions count and keeps the
* values within a usual range.
*/
void fscher_volt(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscher_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 2;
else if (operation == SENSORS_PROC_REAL_READ) {
fscher_update_client(client);
switch(ctl_name) {
case FSCHER_SYSCTL_VOLT0:
results[0] = data->volt[0];
break;
case FSCHER_SYSCTL_VOLT1:
results[0] = data->volt[1];
break;
case FSCHER_SYSCTL_VOLT2:
results[0] = data->volt[2];
break;
default:
printk("fscher: ctl_name %d not supported\n", ctl_name);
*nrels_mag = 0;
return;
}
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
printk("fscher: writing to chip not supported\n");
}
}
void fscher_pwm(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
switch(ctl_name) {
case FSCHER_SYSCTL_PWM0:
fscher_pwm_internal(client,operation,ctl_name,nrels_mag,results,
0,FSCHER_REG_FAN0_MIN);
break;
case FSCHER_SYSCTL_PWM1:
fscher_pwm_internal(client,operation,ctl_name,nrels_mag,results,
1,FSCHER_REG_FAN1_MIN);
break;
case FSCHER_SYSCTL_PWM2:
fscher_pwm_internal(client,operation,ctl_name,nrels_mag,results,
2,FSCHER_REG_FAN2_MIN);
break;
default:
printk("fscher: illegal pwm nr %d\n",ctl_name);
}
}
void fscher_pwm_internal(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results,
int nr, int reg_min)
{
struct fscher_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscher_update_client(client);
results[0] = data->fan_min[nr];
*nrels_mag = 1;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
data->fan_min[nr] = results[0];
printk("fscher: writing value 0x%02x to fan%d_min\n",
data->fan_min[nr],nr);
fscher_write_value(client,reg_min,data->fan_min[nr]);
}
}
}
void fscher_fan(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
switch(ctl_name) {
case FSCHER_SYSCTL_FAN0:
fscher_fan_internal(client,operation,ctl_name,nrels_mag,results,
0,FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_RIPPLE);
break;
case FSCHER_SYSCTL_FAN1:
fscher_fan_internal(client,operation,ctl_name,nrels_mag,results,
1,FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_RIPPLE);
break;
case FSCHER_SYSCTL_FAN2:
fscher_fan_internal(client,operation,ctl_name,nrels_mag,results,
2,FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_RIPPLE);
break;
default:
printk("fscher: illegal fan nr %d\n",ctl_name);
}
}
#define RPM_FROM_REG(val) (val*60)
void fscher_fan_internal(struct i2c_client *client, int operation,
int ctl_name, int *nrels_mag, long *results,
int nr, int reg_state, int reg_ripple)
{
struct fscher_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscher_update_client(client);
results[0] = data->fan_status[nr] & 0x04;
results[1] = data->fan_ripple[nr] & 0x03;
results[2] = RPM_FROM_REG(data->fan_act[nr]);
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if(*nrels_mag >= 1) {
data->fan_status[nr] = results[0] & 0x04;
printk("fscher: writing value 0x%02x to fan%d_status\n",
data->fan_status[nr],nr);
fscher_write_value(client,reg_state,data->fan_status[nr]);
}
if(*nrels_mag >= 2) {
if((results[1] & 0x03) == 0) {
printk("fscher: fan%d ripple 0 not allowed\n",nr);
return;
}
data->fan_ripple[nr] = results[1] & 0x03;
printk("fscher: writing value 0x%02x to fan%d_ripple\n",
data->fan_ripple[nr],nr);
fscher_write_value(client,reg_ripple,data->fan_ripple[nr]);
}
}
}
void fscher_wdog(struct i2c_client *client, int operation, int ctl_name,
int *nrels_mag, long *results)
{
struct fscher_data *data = client->data;
if (operation == SENSORS_PROC_REAL_INFO)
*nrels_mag = 0;
else if (operation == SENSORS_PROC_REAL_READ) {
fscher_update_client(client);
results[0] = data->watchdog[0] ;
results[1] = data->watchdog[1] & 0x02;
results[2] = data->watchdog[2] & 0xd0;
*nrels_mag = 3;
} else if (operation == SENSORS_PROC_REAL_WRITE) {
if (*nrels_mag >= 1) {
data->watchdog[0] = results[0] & 0xff;
printk("fscher: writing value 0x%02x to wdog_preset\n",
data->watchdog[0]);
fscher_write_value(client,FSCHER_REG_WDOG_PRESET,data->watchdog[0]);
}
if (*nrels_mag >= 2) {
data->watchdog[1] = results[1] & 0x02;
printk("fscher: writing value 0x%02x to wdog_state\n",
data->watchdog[1]);
fscher_write_value(client,FSCHER_REG_WDOG_STATE,data->watchdog[1]);
}
if (*nrels_mag >= 3) {
data->watchdog[2] = results[2] & 0xf0;
printk("fscher: writing value 0x%02x to wdog_control\n",
data->watchdog[2]);
fscher_write_value(client,FSCHER_REG_WDOG_CONTROL,data->watchdog[2]);
}
}
}
static int __init sm_fscher_init(void)
{
printk("fscher.o version %s (%s)\n", LM_VERSION, LM_DATE);
return i2c_add_driver(&fscher_driver);
}
static void __exit sm_fscher_exit(void)
{
i2c_del_driver(&fscher_driver);
}
MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de> based on work from Hermann"
" Jung <hej@odn.de>, Frodo Looijaard <frodol@dds.nl> and"
" Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("fujitsu siemens hermes chip driver");
MODULE_LICENSE("GPL");
module_init(sm_fscher_init);
module_exit(sm_fscher_exit);
Reference in new issue View Git Blame Copy Permalink