Files
lm-sensors/doc/chips/smartbatt
T
Jean Delvare 67ad2ab008 Documentation update
Add licenses, update modules parameters and chips features


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1580 7894878c-1315-0410-8ee3-d5d059ff63e0
2002-11-07 12:27:08 +00:00

67 lines
1.6 KiB
Plaintext

Kernel driver `smartbatt.o'
==========================
Status: Alpha
Supported chips:
* Smart batteries
Prefix `smartbatt'
Address scanned: 0x0b
Datasheet: Smart Battery Data Specification Revision 1.1
http://www.sbs-forum.org/
Author: M. Studebaker <mdsxyz123@yahoo.com>
License: GPL
Module Parameters
-----------------
* force: short array (min = 1, max = 48)
List of adapter,address pairs to boldly assume to be present
* force_smartbatt: short array (min = 1, max = 48)
List of adapter,address pairs which are unquestionably assumed to contain
a `smartbatt' chip
* probe: short array (min = 1, max = 48)
List of adapter,address pairs to scan additionally
* probe_range: short array (min = 1, max = 48)
List of adapter,start-addr,end-addr triples to scan additionally
* ignore: short array (min = 1, max = 48)
List of adapter,address pairs not to scan
* ignore_range: short array (min = 1, max = 48)
List of adapter,start-addr,end-addr triples not to scan
Detection
---------
Very poor. Just looks for the presence of some registers.
Uses
----
Provides read-only access to battery voltage, current, temperature,
charge status, time remaining, and alarms.
/proc entries
-------------
Average readings are one minute rolling averages.
alarms bitmask
charge relative charge, absolute charge (%)
i average current, instantaneous current (A)
temp temperature (deg. C)
time avg. time to empty, avg. time to full,
instantaneous time to full (min)
v max voltage, current voltage (V)
To do
-----
More features.