mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-24 12:04:33 +00:00
Mark D. Studebaker
b71c744437
this should fix the problems for 810 folks. Untested;
checking in for people to test.
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1669 7894878c-1315-0410-8ee3-d5d059ff63e0
365 lines
8.8 KiB
C
365 lines
8.8 KiB
C
/*
|
|
i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (c) 1998, 1999, 2000 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>,
|
|
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
|
Simon Vogl
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
/*
|
|
This interfaces to the I810/I815 to provide access to
|
|
the DDC Bus and the I2C Bus.
|
|
|
|
SUPPORTED DEVICES PCI ID
|
|
i810AA 7121
|
|
i810AB 7123
|
|
i810E 7125
|
|
i815 1132
|
|
*/
|
|
|
|
|
|
#include <linux/version.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include "version.h"
|
|
#include <linux/init.h>
|
|
|
|
#ifdef MODULE_LICENSE
|
|
MODULE_LICENSE("GPL");
|
|
#endif
|
|
|
|
/* PCI defines */
|
|
#ifndef PCI_DEVICE_ID_INTEL_82810_IG1
|
|
#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_INTEL_82810_IG3
|
|
#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123
|
|
#endif
|
|
#ifndef PCI_DEVICE_ID_INTEL_82815_2
|
|
#define PCI_DEVICE_ID_INTEL_82815_2 0x1132
|
|
#endif
|
|
|
|
static int i810_supported[] = {PCI_DEVICE_ID_INTEL_82810_IG1,
|
|
PCI_DEVICE_ID_INTEL_82810_IG3,
|
|
0x7125,
|
|
PCI_DEVICE_ID_INTEL_82815_2,
|
|
0x2562,
|
|
0 };
|
|
|
|
/* GPIO register locations */
|
|
#define I810_IOCONTROL_OFFSET 0x5000
|
|
#define I810_HVSYNC 0x00 /* not used */
|
|
#define I810_GPIOA 0x10
|
|
#define I810_GPIOB 0x14
|
|
|
|
/* bit locations in the registers */
|
|
#define SCL_DIR_MASK 0x0001
|
|
#define SCL_DIR 0x0002
|
|
#define SCL_VAL_MASK 0x0004
|
|
#define SCL_VAL_OUT 0x0008
|
|
#define SCL_VAL_IN 0x0010
|
|
#define SDA_DIR_MASK 0x0100
|
|
#define SDA_DIR 0x0200
|
|
#define SDA_VAL_MASK 0x0400
|
|
#define SDA_VAL_OUT 0x0800
|
|
#define SDA_VAL_IN 0x1000
|
|
|
|
/* initialization states */
|
|
#define INIT1 0x1
|
|
#define INIT2 0x2
|
|
#define INIT3 0x4
|
|
|
|
/* delays */
|
|
#define CYCLE_DELAY 10
|
|
#define TIMEOUT (HZ / 2)
|
|
|
|
#ifdef MODULE
|
|
static
|
|
#else
|
|
extern
|
|
#endif
|
|
int __init i2c_i810_init(void);
|
|
static int __init i810i2c_cleanup(void);
|
|
static int i810i2c_setup(void);
|
|
static void config_i810(struct pci_dev *dev);
|
|
static void i810_inc(struct i2c_adapter *adapter);
|
|
static void i810_dec(struct i2c_adapter *adapter);
|
|
|
|
#ifdef MODULE
|
|
extern int init_module(void);
|
|
extern int cleanup_module(void);
|
|
#endif /* MODULE */
|
|
|
|
static int __initdata i810i2c_initialized;
|
|
static unsigned char *mem;
|
|
|
|
static inline void outlong(unsigned int dat, int off)
|
|
{
|
|
*((unsigned int *) (mem + off)) = dat;
|
|
}
|
|
|
|
static inline unsigned int readlong(int off)
|
|
{
|
|
return *((unsigned int *) (mem + off));
|
|
}
|
|
|
|
/* The i810 GPIO registers have individual masks for each bit
|
|
so we never have to read before writing. Nice. */
|
|
|
|
static void bit_i810i2c_setscl(void *data, int val)
|
|
{
|
|
outlong((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
|
|
I810_GPIOB);
|
|
readlong(I810_GPIOB); /* flush posted write */
|
|
}
|
|
|
|
static void bit_i810i2c_setsda(void *data, int val)
|
|
{
|
|
outlong((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
|
|
I810_GPIOB);
|
|
readlong(I810_GPIOB); /* flush posted write */
|
|
}
|
|
|
|
/* The GPIO pins are open drain, so the pins could always remain outputs.
|
|
However, some chip versions don't latch the inputs unless they
|
|
are set as inputs.
|
|
We rely on the i2c-algo-bit routines to set the pins high before
|
|
reading the input from other chips. Following guidance in the 815
|
|
prog. ref. guide, we do a "dummy write" of 0 to the register before
|
|
reading which forces the input value to be latched. We presume this
|
|
applies to the 810 as well; shouldn't hurt anyway. This is necessary to get
|
|
i2c_algo_bit bit_test=1 to pass. */
|
|
|
|
static int bit_i810i2c_getscl(void *data)
|
|
{
|
|
outlong(SCL_DIR_MASK, I810_GPIOB);
|
|
outlong(0, I810_GPIOB);
|
|
return (0 != (readlong(I810_GPIOB) & SCL_VAL_IN));
|
|
}
|
|
|
|
static int bit_i810i2c_getsda(void *data)
|
|
{
|
|
outlong(SDA_DIR_MASK, I810_GPIOB);
|
|
outlong(0, I810_GPIOB);
|
|
return (0 != (readlong(I810_GPIOB) & SDA_VAL_IN));
|
|
}
|
|
|
|
static void bit_i810ddc_setscl(void *data, int val)
|
|
{
|
|
outlong((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK,
|
|
I810_GPIOA);
|
|
readlong(I810_GPIOA); /* flush posted write */
|
|
}
|
|
|
|
static void bit_i810ddc_setsda(void *data, int val)
|
|
{
|
|
outlong((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK,
|
|
I810_GPIOA);
|
|
readlong(I810_GPIOA); /* flush posted write */
|
|
}
|
|
|
|
static int bit_i810ddc_getscl(void *data)
|
|
{
|
|
outlong(SCL_DIR_MASK, I810_GPIOA);
|
|
outlong(0, I810_GPIOA);
|
|
return (0 != (readlong(I810_GPIOA) & SCL_VAL_IN));
|
|
}
|
|
|
|
static int bit_i810ddc_getsda(void *data)
|
|
{
|
|
outlong(SDA_DIR_MASK, I810_GPIOA);
|
|
outlong(0, I810_GPIOA);
|
|
return (0 != (readlong(I810_GPIOA) & SDA_VAL_IN));
|
|
}
|
|
|
|
static struct i2c_algo_bit_data i810_i2c_bit_data = {
|
|
NULL,
|
|
bit_i810i2c_setsda,
|
|
bit_i810i2c_setscl,
|
|
bit_i810i2c_getsda,
|
|
bit_i810i2c_getscl,
|
|
CYCLE_DELAY, CYCLE_DELAY, TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter i810_i2c_adapter = {
|
|
"I810/I815 I2C Adapter",
|
|
I2C_HW_B_I810,
|
|
NULL,
|
|
&i810_i2c_bit_data,
|
|
i810_inc,
|
|
i810_dec,
|
|
NULL,
|
|
NULL,
|
|
};
|
|
|
|
static struct i2c_algo_bit_data i810_ddc_bit_data = {
|
|
NULL,
|
|
bit_i810ddc_setsda,
|
|
bit_i810ddc_setscl,
|
|
bit_i810ddc_getsda,
|
|
bit_i810ddc_getscl,
|
|
CYCLE_DELAY, CYCLE_DELAY, TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter i810_ddc_adapter = {
|
|
"I810/I815 DDC Adapter",
|
|
I2C_HW_B_I810,
|
|
NULL,
|
|
&i810_ddc_bit_data,
|
|
i810_inc,
|
|
i810_dec,
|
|
NULL,
|
|
NULL,
|
|
};
|
|
|
|
|
|
/* Configures the chip */
|
|
void config_i810(struct pci_dev *dev)
|
|
{
|
|
unsigned long cadr;
|
|
|
|
/* map I810 memory */
|
|
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,13)
|
|
cadr = dev->resource[1].start;
|
|
#else
|
|
cadr = dev->base_address[1];
|
|
#endif
|
|
cadr += I810_IOCONTROL_OFFSET;
|
|
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
mem = ioremap_nocache(cadr, 0x1000);
|
|
if(mem) {
|
|
bit_i810i2c_setscl(NULL, 1);
|
|
bit_i810i2c_setsda(NULL, 1);
|
|
bit_i810ddc_setscl(NULL, 1);
|
|
bit_i810ddc_setsda(NULL, 1);
|
|
}
|
|
}
|
|
|
|
/* Detect whether a supported device can be found,
|
|
and initialize it */
|
|
static int i810i2c_setup(void)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
int *num = i810_supported;
|
|
|
|
do {
|
|
if ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
|
|
*num++, dev))) {
|
|
config_i810(dev);
|
|
if(!mem)
|
|
return -ENOMEM;
|
|
printk("i2c-i810.o: i810/i815 found.\n");
|
|
return 0;
|
|
}
|
|
} while (*num != 0);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
|
|
void i810_inc(struct i2c_adapter *adapter)
|
|
{
|
|
MOD_INC_USE_COUNT;
|
|
}
|
|
|
|
void i810_dec(struct i2c_adapter *adapter)
|
|
{
|
|
MOD_DEC_USE_COUNT;
|
|
}
|
|
|
|
int __init i2c_i810_init(void)
|
|
{
|
|
int res;
|
|
printk("i2c-i810.o version %s (%s)\n", LM_VERSION, LM_DATE);
|
|
|
|
i810i2c_initialized = 0;
|
|
if ((res = i810i2c_setup())) {
|
|
printk
|
|
("i2c-i810.o: i810/i815 not detected, module not inserted.\n");
|
|
i810i2c_cleanup();
|
|
return res;
|
|
}
|
|
if ((res = i2c_bit_add_bus(&i810_i2c_adapter))) {
|
|
printk("i2c-i810.o: I2C adapter registration failed\n");
|
|
} else {
|
|
printk("i2c-i810.o: I810/I815 I2C bus initialized\n");
|
|
i810i2c_initialized |= INIT2;
|
|
}
|
|
if ((res = i2c_bit_add_bus(&i810_ddc_adapter))) {
|
|
printk("i2c-i810.o: DDC adapter registration failed\n");
|
|
} else {
|
|
printk("i2c-i810.o: I810/I815 DDC bus initialized\n");
|
|
i810i2c_initialized |= INIT3;
|
|
}
|
|
if(!(i810i2c_initialized & (INIT2 | INIT3))) {
|
|
printk("i2c-i810.o: Both registrations failed, module not inserted\n");
|
|
i810i2c_cleanup();
|
|
return res;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int __init i810i2c_cleanup(void)
|
|
{
|
|
int res;
|
|
|
|
iounmap(mem);
|
|
if (i810i2c_initialized & INIT3) {
|
|
if ((res = i2c_bit_del_bus(&i810_ddc_adapter))) {
|
|
printk
|
|
("i2c-i810.o: i2c_del_adapter failed, module not removed\n");
|
|
return res;
|
|
}
|
|
}
|
|
if (i810i2c_initialized & INIT2) {
|
|
if ((res = i2c_bit_del_bus(&i810_i2c_adapter))) {
|
|
printk
|
|
("i2c-i810.o: i2c_del_adapter failed, module not removed\n");
|
|
return res;
|
|
}
|
|
}
|
|
i810i2c_initialized = 0;
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_NO_SYMBOLS;
|
|
|
|
#ifdef MODULE
|
|
|
|
MODULE_AUTHOR
|
|
("Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, Ralph Metzler <rjkm@thp.uni-koeln.de>, and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
MODULE_DESCRIPTION("I810/I815 I2C/DDC driver");
|
|
|
|
|
|
int init_module(void)
|
|
{
|
|
return i2c_i810_init();
|
|
}
|
|
|
|
int cleanup_module(void)
|
|
{
|
|
return i810i2c_cleanup();
|
|
}
|
|
|
|
#endif /* MODULE */
|