mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-17 10:59:31 +00:00
Philip Edelbrock
25af130058
MC1066 support. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1535 7894878c-1315-0410-8ee3-d5d059ff63e0
669 lines
20 KiB
C
669 lines
20 KiB
C
/*
|
|
adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
|
|
Philip Edelbrock <phil@netroedge.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/version.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include "sensors.h"
|
|
#include "version.h"
|
|
#include <linux/init.h>
|
|
|
|
#ifdef MODULE_LICENSE
|
|
MODULE_LICENSE("GPL");
|
|
#endif
|
|
|
|
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18)) || \
|
|
(LINUX_VERSION_CODE == KERNEL_VERSION(2,3,0))
|
|
#define init_MUTEX(s) do { *(s) = MUTEX; } while(0)
|
|
#endif
|
|
|
|
#ifndef THIS_MODULE
|
|
#define THIS_MODULE NULL
|
|
#endif
|
|
|
|
/* Addresses to scan */
|
|
static unsigned short normal_i2c[] = { SENSORS_I2C_END };
|
|
static unsigned short normal_i2c_range[] = { 0x18, 0x1a, 0x29, 0x2b,
|
|
0x4c, 0x4e, SENSORS_I2C_END
|
|
};
|
|
static unsigned int normal_isa[] = { SENSORS_ISA_END };
|
|
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
|
|
|
|
/* Insmod parameters */
|
|
SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066);
|
|
|
|
/* adm1021 constants specified below */
|
|
|
|
/* The adm1021 registers */
|
|
/* Read-only */
|
|
#define ADM1021_REG_TEMP 0x00
|
|
#define ADM1021_REG_REMOTE_TEMP 0x01
|
|
#define ADM1021_REG_STATUS 0x02
|
|
#define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
|
|
#define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */
|
|
#define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */
|
|
/* These use different addresses for reading/writing */
|
|
#define ADM1021_REG_CONFIG_R 0x03
|
|
#define ADM1021_REG_CONFIG_W 0x09
|
|
#define ADM1021_REG_CONV_RATE_R 0x04
|
|
#define ADM1021_REG_CONV_RATE_W 0x0A
|
|
/* These are for the ADM1023's additional precision on the remote temp sensor */
|
|
#define ADM1021_REG_REM_TEMP_PREC 0x010
|
|
#define ADM1021_REG_REM_OFFSET 0x011
|
|
#define ADM1021_REG_REM_OFFSET_PREC 0x012
|
|
#define ADM1021_REG_REM_TOS_PREC 0x013
|
|
#define ADM1021_REG_REM_THYST_PREC 0x014
|
|
/* limits */
|
|
#define ADM1021_REG_TOS_R 0x05
|
|
#define ADM1021_REG_TOS_W 0x0B
|
|
#define ADM1021_REG_REMOTE_TOS_R 0x07
|
|
#define ADM1021_REG_REMOTE_TOS_W 0x0D
|
|
#define ADM1021_REG_THYST_R 0x06
|
|
#define ADM1021_REG_THYST_W 0x0C
|
|
#define ADM1021_REG_REMOTE_THYST_R 0x08
|
|
#define ADM1021_REG_REMOTE_THYST_W 0x0E
|
|
/* write-only */
|
|
#define ADM1021_REG_ONESHOT 0x0F
|
|
|
|
|
|
/* Conversions. Rounding and limit checking is only done on the TO_REG
|
|
variants. Note that you should be a bit careful with which arguments
|
|
these macros are called: arguments may be evaluated more than once.
|
|
Fixing this is just not worth it. */
|
|
/* Conversions note: 1021 uses normal integer signed-byte format*/
|
|
#define TEMP_FROM_REG(val) (val > 127 ? val-256 : val)
|
|
#define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? val+256 : val),0,255))
|
|
|
|
/* Initial values */
|
|
|
|
/* Note: Eventhough I left the low and high limits named os and hyst,
|
|
they don't quite work like a thermostat the way the LM75 does. I.e.,
|
|
a lower temp than THYST actuall triggers an alarm instead of
|
|
clearing it. Weird, ey? --Phil */
|
|
#define adm1021_INIT_TOS 60
|
|
#define adm1021_INIT_THYST 20
|
|
#define adm1021_INIT_REMOTE_TOS 60
|
|
#define adm1021_INIT_REMOTE_THYST 20
|
|
|
|
/* Each client has this additional data */
|
|
struct adm1021_data {
|
|
int sysctl_id;
|
|
enum chips type;
|
|
|
|
struct semaphore update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
u8 temp, temp_os, temp_hyst; /* Register values */
|
|
u8 remote_temp, remote_temp_os, remote_temp_hyst, alarms, die_code;
|
|
/* Special values for ADM1023 only */
|
|
u8 remote_temp_prec, remote_temp_os_prec, remote_temp_hyst_prec,
|
|
remote_temp_offset, remote_temp_offset_prec;
|
|
};
|
|
|
|
#ifdef MODULE
|
|
extern int init_module(void);
|
|
extern int cleanup_module(void);
|
|
#endif /* MODULE */
|
|
|
|
#ifdef MODULE
|
|
static
|
|
#else
|
|
extern
|
|
#endif
|
|
int __init sensors_adm1021_init(void);
|
|
static int __init adm1021_cleanup(void);
|
|
static int adm1021_attach_adapter(struct i2c_adapter *adapter);
|
|
static int adm1021_detect(struct i2c_adapter *adapter, int address,
|
|
unsigned short flags, int kind);
|
|
static void adm1021_init_client(struct i2c_client *client);
|
|
static int adm1021_detach_client(struct i2c_client *client);
|
|
static int adm1021_command(struct i2c_client *client, unsigned int cmd,
|
|
void *arg);
|
|
static void adm1021_inc_use(struct i2c_client *client);
|
|
static void adm1021_dec_use(struct i2c_client *client);
|
|
static int adm1021_read_value(struct i2c_client *client, u8 reg);
|
|
static int adm1021_write_value(struct i2c_client *client, u8 reg,
|
|
u16 value);
|
|
static void adm1021_temp(struct i2c_client *client, int operation,
|
|
int ctl_name, int *nrels_mag, long *results);
|
|
static void adm1021_remote_temp(struct i2c_client *client, int operation,
|
|
int ctl_name, int *nrels_mag,
|
|
long *results);
|
|
static void adm1021_alarms(struct i2c_client *client, int operation,
|
|
int ctl_name, int *nrels_mag, long *results);
|
|
static void adm1021_die_code(struct i2c_client *client, int operation,
|
|
int ctl_name, int *nrels_mag, long *results);
|
|
static void adm1021_update_client(struct i2c_client *client);
|
|
|
|
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
|
|
static int read_only = 0;
|
|
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver adm1021_driver = {
|
|
/* name */ "ADM1021, MAX1617 sensor driver",
|
|
/* id */ I2C_DRIVERID_ADM1021,
|
|
/* flags */ I2C_DF_NOTIFY,
|
|
/* attach_adapter */ &adm1021_attach_adapter,
|
|
/* detach_client */ &adm1021_detach_client,
|
|
/* command */ &adm1021_command,
|
|
/* inc_use */ &adm1021_inc_use,
|
|
/* dec_use */ &adm1021_dec_use
|
|
};
|
|
|
|
/* These files are created for each detected adm1021. This is just a template;
|
|
though at first sight, you might think we could use a statically
|
|
allocated list, we need some way to get back to the parent - which
|
|
is done through one of the 'extra' fields which are initialized
|
|
when a new copy is allocated. */
|
|
static ctl_table adm1021_dir_table_template[] = {
|
|
{ADM1021_SYSCTL_TEMP, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_temp},
|
|
{ADM1021_SYSCTL_REMOTE_TEMP, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_remote_temp},
|
|
{ADM1021_SYSCTL_DIE_CODE, "die_code", NULL, 0, 0444, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_die_code},
|
|
{ADM1021_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_alarms},
|
|
{0}
|
|
};
|
|
|
|
static ctl_table adm1021_max_dir_table_template[] = {
|
|
{ADM1021_SYSCTL_TEMP, "temp1", NULL, 0, 0644, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_temp},
|
|
{ADM1021_SYSCTL_REMOTE_TEMP, "temp2", NULL, 0, 0644, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_remote_temp},
|
|
{ADM1021_SYSCTL_ALARMS, "alarms", NULL, 0, 0444, NULL, &i2c_proc_real,
|
|
&i2c_sysctl_real, NULL, &adm1021_alarms},
|
|
{0}
|
|
};
|
|
|
|
/* Used by init/cleanup */
|
|
static int __initdata adm1021_initialized = 0;
|
|
|
|
/* I choose here for semi-static allocation. Complete dynamic
|
|
allocation could also be used; the code needed for this would probably
|
|
take more memory than the datastructure takes now. */
|
|
static int adm1021_id = 0;
|
|
|
|
int adm1021_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
return i2c_detect(adapter, &addr_data, adm1021_detect);
|
|
}
|
|
|
|
static int adm1021_detect(struct i2c_adapter *adapter, int address,
|
|
unsigned short flags, int kind)
|
|
{
|
|
int i;
|
|
struct i2c_client *new_client;
|
|
struct adm1021_data *data;
|
|
int err = 0;
|
|
const char *type_name = "";
|
|
const char *client_name = "";
|
|
|
|
/* Make sure we aren't probing the ISA bus!! This is just a safety check
|
|
at this moment; i2c_detect really won't call us. */
|
|
#ifdef DEBUG
|
|
if (i2c_is_isa_adapter(adapter)) {
|
|
printk
|
|
("adm1021.o: adm1021_detect called for an ISA bus adapter?!?\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
goto ERROR0;
|
|
|
|
/* OK. For now, we presume we have a valid client. We now create the
|
|
client structure, even though we cannot fill it completely yet.
|
|
But it allows us to access adm1021_{read,write}_value. */
|
|
|
|
if (!(new_client = kmalloc(sizeof(struct i2c_client) +
|
|
sizeof(struct adm1021_data),
|
|
GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto ERROR0;
|
|
}
|
|
|
|
data = (struct adm1021_data *) (new_client + 1);
|
|
new_client->addr = address;
|
|
new_client->data = data;
|
|
new_client->adapter = adapter;
|
|
new_client->driver = &adm1021_driver;
|
|
new_client->flags = 0;
|
|
|
|
/* Now, we do the remaining detection. */
|
|
|
|
if (kind < 0) {
|
|
if (
|
|
(adm1021_read_value(new_client, ADM1021_REG_STATUS) &
|
|
0x03) != 0x00)
|
|
goto ERROR1;
|
|
}
|
|
|
|
/* Determine the chip type. */
|
|
|
|
if (kind <= 0) {
|
|
i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
|
|
if (i == 0x41)
|
|
if ((adm1021_read_value (new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030)
|
|
kind = adm1023;
|
|
else
|
|
kind = adm1021;
|
|
else if (i == 0x49)
|
|
kind = thmc10;
|
|
else if (i == 0x23)
|
|
kind = gl523sm;
|
|
else if ((i == 0x4d) &&
|
|
(adm1021_read_value
|
|
(new_client, ADM1021_REG_DEV_ID) == 0x01))
|
|
kind = max1617a;
|
|
/* LM84 Mfr ID in a different place */
|
|
else
|
|
if (adm1021_read_value
|
|
(new_client, ADM1021_REG_CONV_RATE_R) == 0x00)
|
|
kind = lm84;
|
|
else if (i == 0x54)
|
|
kind = mc1066;
|
|
else
|
|
kind = max1617;
|
|
}
|
|
|
|
if (kind == max1617) {
|
|
type_name = "max1617";
|
|
client_name = "MAX1617 chip";
|
|
} else if (kind == max1617a) {
|
|
type_name = "max1617a";
|
|
client_name = "MAX1617A chip";
|
|
} else if (kind == adm1021) {
|
|
type_name = "adm1021";
|
|
client_name = "ADM1021 chip";
|
|
} else if (kind == adm1023) {
|
|
type_name = "adm1023";
|
|
client_name = "ADM1023 chip";
|
|
} else if (kind == thmc10) {
|
|
type_name = "thmc10";
|
|
client_name = "THMC10 chip";
|
|
} else if (kind == lm84) {
|
|
type_name = "lm84";
|
|
client_name = "LM84 chip";
|
|
} else if (kind == gl523sm) {
|
|
type_name = "gl523sm";
|
|
client_name = "GL523SM chip";
|
|
} else if (kind == mc1066) {
|
|
type_name = "mc1066";
|
|
client_name = "MC1066 chip";
|
|
} else {
|
|
#ifdef DEBUG
|
|
printk("adm1021.o: Internal error: unknown kind (%d)?!?",
|
|
kind);
|
|
#endif
|
|
goto ERROR1;
|
|
}
|
|
|
|
/* Fill in the remaining client fields and put it into the global list */
|
|
strcpy(new_client->name, client_name);
|
|
data->type = kind;
|
|
|
|
new_client->id = adm1021_id++;
|
|
data->valid = 0;
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
if ((err = i2c_attach_client(new_client)))
|
|
goto ERROR3;
|
|
|
|
/* Register a new directory entry with module sensors */
|
|
if ((i = i2c_register_entry(new_client,
|
|
type_name,
|
|
data->type ==
|
|
adm1021 ?
|
|
adm1021_dir_table_template :
|
|
adm1021_max_dir_table_template,
|
|
THIS_MODULE)) < 0) {
|
|
err = i;
|
|
goto ERROR4;
|
|
}
|
|
data->sysctl_id = i;
|
|
|
|
/* Initialize the ADM1021 chip */
|
|
adm1021_init_client(new_client);
|
|
return 0;
|
|
|
|
/* OK, this is not exactly good programming practice, usually. But it is
|
|
very code-efficient in this case. */
|
|
|
|
ERROR4:
|
|
i2c_detach_client(new_client);
|
|
ERROR3:
|
|
ERROR1:
|
|
kfree(new_client);
|
|
ERROR0:
|
|
return err;
|
|
}
|
|
|
|
void adm1021_init_client(struct i2c_client *client)
|
|
{
|
|
/* Initialize the adm1021 chip */
|
|
adm1021_write_value(client, ADM1021_REG_TOS_W,
|
|
TEMP_TO_REG(adm1021_INIT_TOS));
|
|
adm1021_write_value(client, ADM1021_REG_THYST_W,
|
|
TEMP_TO_REG(adm1021_INIT_THYST));
|
|
adm1021_write_value(client, ADM1021_REG_REMOTE_TOS_W,
|
|
TEMP_TO_REG(adm1021_INIT_REMOTE_TOS));
|
|
adm1021_write_value(client, ADM1021_REG_REMOTE_THYST_W,
|
|
TEMP_TO_REG(adm1021_INIT_REMOTE_THYST));
|
|
/* Enable ADC and disable suspend mode */
|
|
adm1021_write_value(client, ADM1021_REG_CONFIG_W, 0);
|
|
/* Set Conversion rate to 1/sec (this can be tinkered with) */
|
|
adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
|
|
}
|
|
|
|
int adm1021_detach_client(struct i2c_client *client)
|
|
{
|
|
|
|
int err;
|
|
|
|
i2c_deregister_entry(((struct adm1021_data *) (client->data))->
|
|
sysctl_id);
|
|
|
|
if ((err = i2c_detach_client(client))) {
|
|
printk
|
|
("adm1021.o: Client deregistration failed, client not detached.\n");
|
|
return err;
|
|
}
|
|
|
|
kfree(client);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
/* No commands defined yet */
|
|
int adm1021_command(struct i2c_client *client, unsigned int cmd, void *arg)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void adm1021_inc_use(struct i2c_client *client)
|
|
{
|
|
#ifdef MODULE
|
|
MOD_INC_USE_COUNT;
|
|
#endif
|
|
}
|
|
|
|
void adm1021_dec_use(struct i2c_client *client)
|
|
{
|
|
#ifdef MODULE
|
|
MOD_DEC_USE_COUNT;
|
|
#endif
|
|
}
|
|
|
|
/* All registers are byte-sized */
|
|
int adm1021_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
{
|
|
if (read_only > 0)
|
|
return 0;
|
|
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
void adm1021_update_client(struct i2c_client *client)
|
|
{
|
|
struct adm1021_data *data = client->data;
|
|
|
|
down(&data->update_lock);
|
|
|
|
if ((jiffies - data->last_updated > HZ + HZ / 2) ||
|
|
(jiffies < data->last_updated) || !data->valid) {
|
|
|
|
#ifdef DEBUG
|
|
printk("Starting adm1021 update\n");
|
|
#endif
|
|
|
|
data->temp = adm1021_read_value(client, ADM1021_REG_TEMP);
|
|
data->temp_os =
|
|
adm1021_read_value(client, ADM1021_REG_TOS_R);
|
|
data->temp_hyst =
|
|
adm1021_read_value(client, ADM1021_REG_THYST_R);
|
|
data->remote_temp =
|
|
adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP);
|
|
data->remote_temp_os =
|
|
adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R);
|
|
data->remote_temp_hyst =
|
|
adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R);
|
|
data->alarms =
|
|
adm1021_read_value(client, ADM1021_REG_STATUS) & 0xec;
|
|
if (data->type == adm1021)
|
|
data->die_code =
|
|
adm1021_read_value(client,
|
|
ADM1021_REG_DIE_CODE);
|
|
if (data->type == adm1023) {
|
|
data->remote_temp_prec =
|
|
adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC);
|
|
data->remote_temp_os_prec =
|
|
adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC);
|
|
data->remote_temp_hyst_prec =
|
|
adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
|
|
data->remote_temp_offset =
|
|
adm1021_read_value(client, ADM1021_REG_REM_OFFSET);
|
|
data->remote_temp_offset_prec =
|
|
adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
|
|
}
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
up(&data->update_lock);
|
|
}
|
|
|
|
|
|
void adm1021_temp(struct i2c_client *client, int operation, int ctl_name,
|
|
int *nrels_mag, long *results)
|
|
{
|
|
struct adm1021_data *data = client->data;
|
|
if (operation == SENSORS_PROC_REAL_INFO)
|
|
*nrels_mag = 0;
|
|
else if (operation == SENSORS_PROC_REAL_READ) {
|
|
adm1021_update_client(client);
|
|
results[0] = TEMP_FROM_REG(data->temp_os);
|
|
results[1] = TEMP_FROM_REG(data->temp_hyst);
|
|
results[2] = TEMP_FROM_REG(data->temp);
|
|
*nrels_mag = 3;
|
|
} else if (operation == SENSORS_PROC_REAL_WRITE) {
|
|
if (*nrels_mag >= 1) {
|
|
data->temp_os = TEMP_TO_REG(results[0]);
|
|
adm1021_write_value(client, ADM1021_REG_TOS_W,
|
|
data->temp_os);
|
|
}
|
|
if (*nrels_mag >= 2) {
|
|
data->temp_hyst = TEMP_TO_REG(results[1]);
|
|
adm1021_write_value(client, ADM1021_REG_THYST_W,
|
|
data->temp_hyst);
|
|
}
|
|
}
|
|
}
|
|
|
|
void adm1021_remote_temp(struct i2c_client *client, int operation,
|
|
int ctl_name, int *nrels_mag, long *results)
|
|
{
|
|
int prec=0;
|
|
struct adm1021_data *data = client->data;
|
|
if (operation == SENSORS_PROC_REAL_INFO)
|
|
if (data->type == adm1023) { *nrels_mag = 3; }
|
|
else { *nrels_mag = 0; }
|
|
else if (operation == SENSORS_PROC_REAL_READ) {
|
|
adm1021_update_client(client);
|
|
results[0] = TEMP_FROM_REG(data->remote_temp_os);
|
|
results[1] = TEMP_FROM_REG(data->remote_temp_hyst);
|
|
results[2] = TEMP_FROM_REG(data->remote_temp);
|
|
if (data->type == adm1023) {
|
|
results[0]=results[0]*1000 +
|
|
((data->remote_temp_os_prec >> 5) * 125);
|
|
results[1]=results[1]*1000 +
|
|
((data->remote_temp_hyst_prec >> 5) * 125);
|
|
results[2]=(TEMP_FROM_REG(data->remote_temp_offset)*1000) +
|
|
((data->remote_temp_offset_prec >> 5) * 125);
|
|
results[3]=TEMP_FROM_REG(data->remote_temp)*1000 +
|
|
((data->remote_temp_prec >> 5) * 125);
|
|
*nrels_mag = 4;
|
|
} else {
|
|
*nrels_mag = 3;
|
|
}
|
|
} else if (operation == SENSORS_PROC_REAL_WRITE) {
|
|
if (*nrels_mag >= 1) {
|
|
if (data->type == adm1023) {
|
|
prec=((results[0]-((results[0]/1000)*1000))/125)<<5;
|
|
adm1021_write_value(client,
|
|
ADM1021_REG_REM_TOS_PREC,
|
|
prec);
|
|
results[0]=results[0]/1000;
|
|
data->remote_temp_os_prec=prec;
|
|
}
|
|
data->remote_temp_os = TEMP_TO_REG(results[0]);
|
|
adm1021_write_value(client,
|
|
ADM1021_REG_REMOTE_TOS_W,
|
|
data->remote_temp_os);
|
|
}
|
|
if (*nrels_mag >= 2) {
|
|
if (data->type == adm1023) {
|
|
prec=((results[1]-((results[1]/1000)*1000))/125)<<5;
|
|
adm1021_write_value(client,
|
|
ADM1021_REG_REM_THYST_PREC,
|
|
prec);
|
|
results[1]=results[1]/1000;
|
|
data->remote_temp_hyst_prec=prec;
|
|
}
|
|
data->remote_temp_hyst = TEMP_TO_REG(results[1]);
|
|
adm1021_write_value(client,
|
|
ADM1021_REG_REMOTE_THYST_W,
|
|
data->remote_temp_hyst);
|
|
}
|
|
if (*nrels_mag >= 3) {
|
|
if (data->type == adm1023) {
|
|
prec=((results[2]-((results[2]/1000)*1000))/125)<<5;
|
|
adm1021_write_value(client,
|
|
ADM1021_REG_REM_OFFSET_PREC,
|
|
prec);
|
|
results[2]=results[2]/1000;
|
|
data->remote_temp_offset_prec=prec;
|
|
data->remote_temp_offset=results[2];
|
|
adm1021_write_value(client,
|
|
ADM1021_REG_REM_OFFSET,
|
|
data->remote_temp_offset);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void adm1021_die_code(struct i2c_client *client, int operation,
|
|
int ctl_name, int *nrels_mag, long *results)
|
|
{
|
|
struct adm1021_data *data = client->data;
|
|
if (operation == SENSORS_PROC_REAL_INFO)
|
|
*nrels_mag = 0;
|
|
else if (operation == SENSORS_PROC_REAL_READ) {
|
|
adm1021_update_client(client);
|
|
results[0] = data->die_code;
|
|
*nrels_mag = 1;
|
|
} else if (operation == SENSORS_PROC_REAL_WRITE) {
|
|
/* Can't write to it */
|
|
}
|
|
}
|
|
|
|
void adm1021_alarms(struct i2c_client *client, int operation, int ctl_name,
|
|
int *nrels_mag, long *results)
|
|
{
|
|
struct adm1021_data *data = client->data;
|
|
if (operation == SENSORS_PROC_REAL_INFO)
|
|
*nrels_mag = 0;
|
|
else if (operation == SENSORS_PROC_REAL_READ) {
|
|
adm1021_update_client(client);
|
|
results[0] = data->alarms;
|
|
*nrels_mag = 1;
|
|
} else if (operation == SENSORS_PROC_REAL_WRITE) {
|
|
/* Can't write to it */
|
|
}
|
|
}
|
|
|
|
int __init sensors_adm1021_init(void)
|
|
{
|
|
int res;
|
|
|
|
printk("adm1021.o version %s (%s)\n", LM_VERSION, LM_DATE);
|
|
adm1021_initialized = 0;
|
|
if ((res = i2c_add_driver(&adm1021_driver))) {
|
|
printk
|
|
("adm1021.o: Driver registration failed, module not inserted.\n");
|
|
adm1021_cleanup();
|
|
return res;
|
|
}
|
|
adm1021_initialized++;
|
|
return 0;
|
|
}
|
|
|
|
int __init adm1021_cleanup(void)
|
|
{
|
|
int res;
|
|
|
|
if (adm1021_initialized >= 1) {
|
|
if ((res = i2c_del_driver(&adm1021_driver))) {
|
|
printk
|
|
("adm1021.o: Driver deregistration failed, module not removed.\n");
|
|
return res;
|
|
}
|
|
adm1021_initialized--;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_NO_SYMBOLS;
|
|
|
|
#ifdef MODULE
|
|
|
|
MODULE_AUTHOR
|
|
("Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com>");
|
|
MODULE_DESCRIPTION("adm1021 driver");
|
|
|
|
MODULE_PARM(read_only, "i");
|
|
MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
|
|
|
|
int init_module(void)
|
|
{
|
|
return sensors_adm1021_init();
|
|
}
|
|
|
|
int cleanup_module(void)
|
|
{
|
|
return adm1021_cleanup();
|
|
}
|
|
|
|
#endif /* MODULE */
|