mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-26 12:24:33 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
63 lines
1.6 KiB
Plaintext
63 lines
1.6 KiB
Plaintext
# Configuration file contributed by Marcus Roeckrath
|
|
|
|
# Sample configuration for ASRock K7VT2
|
|
|
|
chip "w83697hf-*"
|
|
|
|
label in0 "VCore"
|
|
label in2 "+3.3V"
|
|
label in3 "+5V"
|
|
label in4 "+12V"
|
|
label in5 "-12V"
|
|
label in6 "-5V"
|
|
label in7 "V5SB"
|
|
label in8 "VBat"
|
|
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
compute in4 ((28/10)+1)*@ , @/((28/10)+1)
|
|
# These are the compute lines for -12V and -5V from the
|
|
# sample config file sensors.conf.eg from the lm-sensors
|
|
# source archive.
|
|
# But these lines give positive values on the K7VT2 board.
|
|
# compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
|
|
# compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14
|
|
# Therefor I use the compute lines for the positive
|
|
# voltages for the negative voltages also and added a "-"
|
|
# to get plausible negative values.
|
|
compute in5 -((28/10)+1)*@ , -@/((28/10)+1)
|
|
compute in6 -((6.8/10)+1)*@ , -@/((6.8/10)+1)
|
|
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
|
|
set in0_min 1.5 * 0.95
|
|
set in0_max 1.65 * 1.05
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in3_min 5 * 0.95
|
|
set in3_max 5 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
set in5_min -12 * 0.9
|
|
set in5_max -12 * 1.1
|
|
set in6_min -5 * 0.9
|
|
set in6_max -5 * 1.1
|
|
set in7_min 5 * 0.95
|
|
set in7_max 5 * 1.05
|
|
set in8_min 3.0 * 0.8
|
|
set in8_max 3.0 * 1.2
|
|
|
|
label temp1 "System Temp"
|
|
label temp2 "CPU Temp"
|
|
|
|
set temp1_max 50
|
|
set temp1_max_hyst 45
|
|
set temp2_max 52
|
|
set temp2_max_hyst 47
|
|
|
|
label fan1 "CPU Fan"
|
|
label fan2 "Chassis Fan"
|
|
|
|
set fan1_div 4
|
|
set fan1_min 2000
|
|
set fan2_div 8
|
|
set fan2_min 1000
|