mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-10-30 13:00:30 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
69 lines
1.7 KiB
Plaintext
69 lines
1.7 KiB
Plaintext
# lm_sensors configuration file for the ASRock M2NF3-VSTA motherboard
|
|
# 2008-01-01, Hans de Goede <j.w.r.degoede@hhs.nl>
|
|
# Comments welcome!
|
|
|
|
# Winbond W83627EHF configuration for ASRock AM2NF3-VSTA
|
|
chip "w83627ehf-*" "w83627dhg-*"
|
|
|
|
label in0 "VCore"
|
|
label in1 "VCore2"
|
|
label in2 "AVCC"
|
|
label in3 "3VCC"
|
|
label in6 "12V"
|
|
label in7 "VSB"
|
|
label in8 "VBAT"
|
|
label in9 "5V"
|
|
|
|
# +12V and +5V use dividers recommended by datasheet
|
|
compute in6 @*(1+(56/10)), @/(1+(56/10))
|
|
compute in9 @*(1+(22/10)), @/(1+(22/10))
|
|
|
|
# in4 and in5 are not used (they seem to be hooked up to 3.3v/2, but thats
|
|
# already monitored)
|
|
ignore in4
|
|
ignore in5
|
|
|
|
# we need to set all voltage limits (hurray for a well written BIOS)
|
|
# Note you may need to adapt in0 and in1 depending on your CPU
|
|
set in0_min 0.9
|
|
set in0_max 1.5
|
|
set in1_min 0.9
|
|
set in1_max 1.5
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
set in3_min 3.3*0.95
|
|
set in3_max 3.3*1.05
|
|
set in6_min 12.0*0.9
|
|
set in6_max 12.0*1.1
|
|
set in7_min 3.3*0.95
|
|
set in7_max 3.3*1.05
|
|
set in8_min 3.0
|
|
set in8_max 3.3*1.05
|
|
set in9_min 5.0*0.95
|
|
set in9_max 5.0*1.05
|
|
|
|
# Fans
|
|
label fan1 "Case Fan"
|
|
label fan2 "CPU Fan"
|
|
ignore fan3
|
|
ignore fan5
|
|
# Fan minumums, disable fan1 min as a case fan isn't always connected,
|
|
set fan1_min 0
|
|
# set fan2_min 1700
|
|
|
|
# Temperatures
|
|
label temp1 "Sys Temp"
|
|
label temp2 "CPU Temp"
|
|
label temp3 "CPU2 Temp"
|
|
|
|
set temp1_max 45
|
|
set temp1_max_hyst 40
|
|
|
|
|
|
chip "k8temp-*"
|
|
|
|
label temp1 "Core0 Temp"
|
|
label temp2 "Core0 Temp"
|
|
label temp3 "Core1 Temp"
|
|
label temp4 "Core1 Temp"
|