mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-02 13:30:30 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
65 lines
1.5 KiB
Plaintext
65 lines
1.5 KiB
Plaintext
# "My best guesses at my ABIT KN9 Ultra" Contributed by Dawn Light
|
|
# Based on "Winbond W83627EHF configuration originally contributed by Leon Moonen"
|
|
|
|
chip "w83627ehf-*"
|
|
|
|
label in0 "CPU Core"
|
|
label in1 "DDR2"
|
|
label in2 "AVCC"
|
|
label in3 "3VCC"
|
|
label in4 "DDR2 VTT"
|
|
label in5 "PCIE"
|
|
label in6 "ATX +5V"
|
|
label in7 "VSB"
|
|
label in8 "VBAT"
|
|
label in9 "ATX +12V"
|
|
compute in1 @*(1+(10/10)), @/(1+(10/10))
|
|
compute in6 @*(1+(22/10)), @/(1+(22/10))
|
|
compute in9 @*(1+(61/10)), @/(1+(61/10))
|
|
set in0_min 1.15
|
|
set in0_max 1.25
|
|
set in1_min 2.05
|
|
set in1_max 2.15
|
|
set in4_min 0.95
|
|
set in4_max 1.15
|
|
set in5_min 1.50*0.95
|
|
set in5_max 1.50*1.05
|
|
set in6_min 5.0*0.95
|
|
set in6_max 5.0*1.05
|
|
set in9_min 12.0*0.95
|
|
set in9_max 12.0*1.05
|
|
|
|
# Set the 3.3V
|
|
set in2_min 3.3*0.95
|
|
set in2_max 3.3*1.05
|
|
set in3_min 3.3*0.95
|
|
set in3_max 3.3*1.05
|
|
set in7_min 3.3*0.95
|
|
set in7_max 3.3*1.05
|
|
set in8_min 3.3*0.90
|
|
set in8_max 3.3*1.10
|
|
|
|
# Fans
|
|
label fan1 "SYS Fan"
|
|
label fan2 "CPU Fan"
|
|
label fan3 "AUX1 Fan"
|
|
label fan4 "AUX2 Fan"
|
|
# ignore fan3
|
|
ignore fan4
|
|
set fan1_min 400
|
|
set fan2_min 2500
|
|
set fan3_min 890
|
|
|
|
# Temperatures
|
|
label temp1 "Sys Temp"
|
|
label temp2 "CPU Temp"
|
|
label temp3 "PWM Temp"
|
|
|
|
# ignore temp3
|
|
set temp1_over 41
|
|
set temp1_hyst 50
|
|
set temp2_over 50
|
|
set temp2_hyst 60
|
|
set temp3_over 50
|
|
set temp3_hyst 60
|