mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-11 16:40:16 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
90 lines
2.1 KiB
Plaintext
90 lines
2.1 KiB
Plaintext
# Contributed by Matt Roberds.
|
|
|
|
|
|
# Second cut at a minimal sensors3.conf for Asus M2N-SLI Deluxe motherboard
|
|
# Based on existing entries in sensors3.conf and Jean Delvare's configuration
|
|
# for the Asus M2N32-SLI
|
|
# Matt Roberds, 21 Feb 2008
|
|
|
|
|
|
chip "it8716-*"
|
|
|
|
# Voltages
|
|
|
|
label in0 "VCore"
|
|
label in1 "VDDR" # Not in BIOS
|
|
ignore in2 # 3.3 V is monitored by adt7475
|
|
label in3 "+5V" # VCC
|
|
label in4 "+12V"
|
|
ignore in5 # -12 V not monitored
|
|
ignore in6 # -5 V not monitored
|
|
label in7 "5VSB" # Not in BIOS
|
|
label in8 "VBat" # Not in BIOS
|
|
|
|
# Vcore, VDDR, and Vbat are connected directly, so no compute
|
|
# line is needed for these. For +5V, +12V and 5VSB, the default
|
|
# resistors seem to have been used.
|
|
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
compute in4 ((30/10)+1)*@ , @/((30/10)+1)
|
|
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
|
|
|
# Temperatures
|
|
|
|
# Not sure. temp1 always reads close to what k8temp reports for Core0,
|
|
# and to what the BIOS reports as the CPU temperature. temp2 is between
|
|
# temp1 and temp3; it is close to what the BIOS reports as the motherboard
|
|
# temperature. temp3 always reads approximate ambient temperature.
|
|
|
|
label temp1 "CPU Temp"
|
|
label temp2 "MB Temp"
|
|
label temp3 "MB Temp"
|
|
|
|
# Fans
|
|
|
|
label fan1 "CPU Fan"
|
|
label fan2 "Chassis Fan 1"
|
|
label fan3 "Power Supply Fan"
|
|
|
|
# Ignore fans you don't have
|
|
# ignore fan2
|
|
# ignore fan3
|
|
|
|
|
|
chip "adt7475-*"
|
|
|
|
# Note: this section depends on some further hacks I have made to
|
|
# Jordan Crouse's driver
|
|
|
|
# Voltages
|
|
|
|
ignore in1
|
|
label in2 "+3.3V"
|
|
|
|
# Temperatures
|
|
|
|
# temp1 and temp3 don't appear to be hooked up; temp2 is on board the
|
|
# adt7475 chip itself.
|
|
|
|
ignore temp1
|
|
label temp2 "ADT7475 Temp"
|
|
ignore temp3
|
|
|
|
# Fans
|
|
|
|
label fan1 "Chassis Fan 4"
|
|
label fan2 "Chassis Fan 2"
|
|
label fan3 "Chassis Fan 3"
|
|
ignore fan4
|
|
|
|
# Ignore fans you don't have
|
|
# ignore fan1
|
|
# ignore fan2
|
|
# ignore fan3
|
|
|
|
|
|
chip "k8temp-*"
|
|
|
|
label temp1 "core0 temp"
|
|
label temp3 "core1 temp"
|
|
|