mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-09 16:21:51 +00:00
Tele42
1398ef0201
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
42 lines
1.1 KiB
Plaintext
42 lines
1.1 KiB
Plaintext
# Sample configuration file contributed by Martin Desormeaux. Note that this
|
|
# board also implements the ATK0110 interface, so starting with kernel 2.6.30
|
|
# you can use the asus_atk0110 driver instead of the it87 driver. It is
|
|
# suggested you don't use both at once.
|
|
|
|
|
|
chip "it8712-*"
|
|
# The values below have been tested on Asus M3A78-CM motherboards.
|
|
|
|
label in0 "VCore"
|
|
ignore in1
|
|
label in2 "+3.3V"
|
|
ignore in3
|
|
label in4 "+12V"
|
|
label in5 "+5V"
|
|
ignore in6
|
|
ignore in7
|
|
label in8 "VBat"
|
|
ignore cpu0_vid
|
|
compute in4 ((28/10) +1)*@ , @/((28/10) +1)
|
|
compute in5 @*(1+(22/10)), @/(1+(22/10))
|
|
set in0_min 1.30 * 0.95
|
|
set in0_max 1.30 * 1.05
|
|
set in2_min 3.3 * 0.95
|
|
set in2_max 3.3 * 1.05
|
|
set in4_min 12 * 0.95
|
|
set in4_max 12 * 1.05
|
|
set in5_min 5 * 0.95
|
|
set in5_max 5 * 1.05
|
|
|
|
set temp1_type 2
|
|
set temp2_type 2
|
|
set temp3_type 3
|
|
ignore temp3
|
|
label temp1 "CPU Temp"
|
|
label temp2 "M/B Temp"
|
|
|
|
label fan1 "CPU Fan"
|
|
label fan2 "Chassis Fan"
|
|
label fan3 "Power Fan"
|
|
|